Show Full Spec Comparison
| Ibanez FTM33 | FLATV1 | |
|---|---|---|
| General | ||
| Brand: | Ibanez | Ibanez |
| Year: | 2021 | 2021 |
| Configuration: | HH | SS |
| Strings: | 8 | 6 |
| Made in: | Indonesia | Japan |
| Series: | FTM | FLATV |
| Colors: | Black | Black |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Ash wing | Ash |
| Bridge: | FX Edge III-8 | Gotoh F1803 |
| Neck | ||
| Neck Joint: | Neck-Through | Bolt-On |
| Tuners: | Ibanez | Gotoh machine heads |
| Fretboard: | Rosewood | Roasted Maple |
| Neck Material: | 7pc Maple/Walnut w/KTS™ TITANIUM rods | 1pc Roasted Maple |
| Decoration: | Black Dot | |
| Scale Size: | 27" | 25.5" |
| Shape: | FTM | FLATV |
| Thickness: | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.85'' (21.6mm) | 1st Fret: 0.87'' (22.1mm) - 12th Fret: 0.96'' (24.4mm) |
| Frets: | 22 Jumbo Nickel Silver | 21 Medium Nickel Silver |
| Fretboard Radius: | 16" | 10" |
| Nut: | Locking | Bone |
| Nut Width: | 55mm (2.165'') | 42mm (1.654'') |
| Electronics | ||
| Bridge Pickups: | Lundgren Model M8P (Humbucker / Passive) | Seymour Duncan FLAT5 (Single Coil / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Lundgren Model M8P (Humbucker / Passive) | Seymour Duncan FLAT5 (Single Coil / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 2 | 1 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black | Chrome |
Show Diagrams Comparison
Reasons to Get
Ibanez FTM33 over FLATV1
Reasons to Get
Ibanez FLATV1 over FTM33
Other Key Differences
Ibanez FTM33 vs FLATV1
Shared Features
Ibanez FTM33 vs FLATV1
Common Strengths
- High-Quality Nut
- Luminescent Sidedots
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Weight Relief
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both are balanced for most hand sizes.
Ibanez FTM33:
Ibanez FLATV1:
Beginner Friendliness
Both meet 4 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Ibanez FTM33- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Ibanez FLATV1- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable fretboard
- Short scale
- Comfortable neck
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Woods Used in the Ibanez FTM33
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Ibanez FLATV1
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Winner: Ibanez FTM33.
Pickup Configuration
The Ibanez FTM33 has an HH configuration while the Ibanez FLATV1 has SS pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Ibanez FLATV1 has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Ibanez FLATV1.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Ibanez FTM33.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Ibanez FTM33 compares to the Ibanez FLATV1.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Ibanez FTM33 is built in Indonesia while the Ibanez FLATV1 is made in Japan.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.
Winner: Ibanez FLATV1
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Ibanez FTM33 has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
On the other hand, the Ibanez FLATV1 comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Ibanez FTM33's are Ibanez while the Ibanez FLATV1's are Gotoh machine heads
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Ibanez FTM33 has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the Ibanez FLATV1 comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Ibanez FTM33.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Ibanez FTM33
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Luminescent Inlay
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Ibanez FLATV1
- Made in Japan
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Luminescent Inlay
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Ibanez FTM33 has the wider nut with 55mm (2.165'') vs 42mm (1.654''). This is a 13mm (0.511'') difference
This means that it will be more difficult to do bar chords on the Ibanez FTM33, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Ibanez FTM33 has the longest scale: 27". The Ibanez FLATV1 is only 25.5" long. This is a 1.5'' (38.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Ibanez FTM33 has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Ibanez FLATV1, on the other hand, has a V neck. This neck shape was more common during Fender's early years. Some people like it because they use their thumb over the edge of the fretboard to press the lower strings. It's rather thicker than most modern necks, so it's not usually used for playing fast solos.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Ibanez FLATV1's fingerboard radius is smaller, which means it's more curved than the Ibanez FTM33's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Ibanez FTM33.
Fret Size
The Ibanez FTM33 has Jumbo frets, which should be taller than the Ibanez FLATV1's Medium frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
