Show Full Spec Comparison
| Ibanez FRM300 | Gibson ES-345 | |
|---|---|---|
| General | ||
| Brand: | Ibanez | Gibson |
| Year: | 2020 | 2019 |
| Configuration: | HHH | HH |
| Strings: | 6 | 6 |
| Made in: | China | United States |
| Series: | PGM/FRM | Original Collection |
| Colors: | Purple | Red, Sunburst Burst |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Semi-Hollow |
| Body Material: | Okoume | Maple and Poplar |
| Bridge: | Gibraltar Performer | ABR-1 Tune-O-Matic |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Ibanez | Vintage Deluxe w/ Keystone Buttons |
| Fretboard: | Bound Ebony | Rosewood |
| Neck Material: | 3pc Okoume/Maple | Mahogany |
| Decoration: | White Dot | Acrylic Split Parallelogram |
| Scale Size: | 24.75" | 24.75" |
| Shape: | FRM | Rounded C |
| Thickness: | 1st Fret: 0.87'' (22.1mm) - 12th Fret: 0.94'' (23.9mm) | 1st Fret: 0.88'' (22.4mm) - 12th Fret: 1'' (25.4mm) |
| Frets: | 22 Narrow Tall Nickel Silver | 22 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 12" | 12" |
| Nut: | Ivory Tusq | Ivory Tusq |
| Nut Width: | 43mm (1.693'') | 43mm (1.693'') |
| Electronics | ||
| Bridge Pickups: | DiMarzio PG-13 (Humbucker / Passive) | Gibson Calibrated T-Type, Lead (Humbucker / Passive) |
| Middle Pickup: | DiMarzio PG-13 (Humbucker / Passive) | |
| Neck Pickup: | DiMarzio PG-13 (Humbucker / Passive) | Gibson Calibrated T-Type, Rhythm (Humbucker / Passive) |
| Switch: | 5 Way | 3 Way |
| Knobs: | Bell | Bell |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 2 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Nickel |
Show Diagrams Comparison
Reasons to Get
Ibanez FRM300 over Gibson ES-345
Reasons to Get
Gibson ES-345 over Ibanez FRM300
Other Key Differences
Ibanez FRM300 vs Gibson ES-345
Shared Features
Ibanez FRM300 vs Gibson ES-345
Common Strengths
- High-Quality Nut
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Ibanez FRM300 favors large hands more than the Gibson ES-345.
Ibanez FRM300:
Gibson ES-345:
Beginner Friendliness
The Gibson ES-345 meets 4 out of our 8 criteria items for beginner friendliness, while the Ibanez FRM300 meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Ibanez FRM300- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable fretboard
- Narrow nut
- Short scale
- Comfortable neck
- Locking tuners
New Player Friendliness
Gibson ES-345- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Ibanez FRM300
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Okoume is an affordable wood and one of the first to replace Mahogany when the prohibitions started. It's generally softer than Mahogany and the tone has warmer lows.
Woods Used in the Gibson ES-345
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Winner: Gibson ES-345.
Pickup Configuration
The Ibanez FRM300 has an HHH configuration while the Gibson ES-345 has HH pickups.
A triple Humbucker (HHH) can be intimidating at first, but it's one of the combinations that offer the most tone versatility. You'll be able to have from a lot of output for Hard Rock genres, to warm and clean sounds that are more common in Jazz.
On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
You can purchase similar pickups to the Ibanez FRM300's and use them on any guitar:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Ibanez FRM300 gives you 5 switch options while the Gibson ES-345 gives you 3. This means that the Ibanez FRM300 gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Ibanez FRM300.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Ibanez FRM300 compares to the Gibson ES-345.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Ibanez FRM300 is built in China while the Gibson ES-345 is made in United States.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Gibson ES-345
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Ivory Tusq nuts. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Ibanez FRM300's are Ibanez while the Gibson ES-345's are Vintage Deluxe w/ Keystone Buttons
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Ibanez FRM300
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Gibson ES-345
- Made in United States
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 24.75".
This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.
On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Ibanez FRM300 has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.
The Gibson ES-345, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Ibanez FRM300 and the Gibson ES-345 have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.
Fret Size
The Ibanez FRM300 has Narrow Tall frets, which should be taller than the Gibson ES-345's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
