Swap
Swap
Ibanez EH10
Schecter Corsair 2020
VS
Playability
77
Sound
80
Build
80
Value
79
Score
79
FIND IT ON:
Amazon logoSweetwater logoMusician's Friend logo
Playability
75
Sound
66
Build
69
Value
70
Score
70
FIND IT ON:
Sweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Ibanez EH10 vs Schecter Corsair 2020 Specs Comparison
Ibanez EH10 Schecter Corsair 2020
General
Brand: Ibanez Schecter
Year: 2019 2021
Configuration: HS HH
Strings: 6 6
Made in: Indonesia Indonesia
Series: EH Corsair
Colors: Green Gold
Left-Handed Version: No No
Body
Type: Solid Body Semi-Hollow
Body Material: Nyatoh Maple
Bridge: Gotoh T1502 tremolo Tremolo Roller Tune-O-Matic
Neck
Neck Joint: Bolt-On Set
Tuners: Gotoh MG-T locking machine heads Grover Rotomatic 18:1
Fretboard: Jatoba Ebony
Neck Material: Roasted Maple Mahogany
Decoration: Off-set white block Blocks
Scale Size: 25.5" 24.75"
Shape: AZ Oval C Thin C
Thickness: 1st Fret: 0.81'' (20.6mm) - 12th Fret: 0.89'' (22.6mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 24 Jumbo Stainless Steel 22 Medium Nickel Silver
Fretboard Radius: 12" 14"
Nut: Ivory Tusq Ivory Tusq
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickups: Seymour Duncan Hyperion (Humbucker / Passive) Schecter Diamond 78 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Seymour Duncan Alnico II Pro APS1 (Single Coil / Passive) Schecter Diamond 78 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Speed
Pickup Mods: Coil Split Coil Split
Volume Controls: 1 2
Tone Controls: 1 2
Hardware
Strap Lock: No No
Hardware Color: Chrome Chrome
Show Diagrams Comparison
Ibanez EH10 pickups switch and push knobs diagram
Ibanez EH10's switch options
Schecter Corsair 2020 pickups switch and push knobs diagram
Schecter Corsair 2020's switch options

Reasons to Get
Ibanez EH10 over Schecter Corsair 2020

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
Jumbo vs Medium
You won't feel the fretboard when pressing down the strings
Pickups Brand
Seymour Duncan vs None
Pickups from a renown brand
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Body Type
Solid Body vs Semi-Hollow
Feedback free
Pickups
HS vs HH
High output with bright neck cleans
Number of Frets
24 vs 22
Allows to reach higher notes
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.81'' (20.6mm) vs 0.79'' (20.1mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.89'' (22.6mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for big hands
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Tremolo vs Bigsby Tremolo
Simple vibratos without too much maintenance
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone
Fretboard Radius
12'' (304.8mm) vs 14'' (355.6mm)
Easier to play chords without muting strings
Value Score
79 vs 70
Better price/quality relationship

Reasons to Get
Schecter Corsair 2020 over Ibanez EH10

Release Year
2021 vs 2019
From a more recent year
Type of Frets
Medium vs Jumbo
You'll feel the fretboard when pressing down the strings
Body Type
Semi-Hollow vs Solid Body
Lighter and allows more gain than a hollowbody
Volume Knobs
2 vs 1
More volume control
Tone Knobs
2 vs 1
More tone control
Pickups
HH vs HS
High output without hum
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.81'' (20.6mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.89'' (22.6mm)
More comfortable at higher frets for small hands
Bridge
Bigsby Tremolo vs Tremolo
Intense vibrato with a solid arm
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
14'' (355.6mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend

Other Key Differences
Ibanez EH10 vs Schecter Corsair 2020

Bridge Pickup
Seymour Duncan Hyperion vs Schecter Diamond 78
Different Bridge Pickup
Neck Pickup
Seymour Duncan Alnico II Pro APS1 vs Schecter Diamond 78
Different Neck Pickup
Body Wood
Nyatoh vs Maple
Different Body Wood
Neck Wood
Roasted Maple vs Mahogany
Different Neck Wood
Fretboard Wood
Jatoba vs Ebony
Different Fretboard Wood
Headstock
6 vs 3-3
Different Headstock

Shared Features
Ibanez EH10 vs Schecter Corsair 2020

Nut Material
Ivory Tusq
Same Nut Material
Strings
6
Same playing style
Switch Positions
3
Same pickups versatility
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed
Decorative Top
Walnut vs Poplar Burl Veneer
Finished with beautiful natural wood patterns
Neck Profile Type
C
Comfortable neck that works for most people

Common Strengths

  • Pickup Alter Switch/Knob
  • High-Quality Nut

Common Weaknesses

  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Hand Size Comfortability

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .

Ibanez EH10:
Big Hands
Small Hands
Schecter Corsair 2020:
Big Hands
Small Hands

Beginner Friendliness

The Ibanez EH10 meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter Corsair 2020 meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Ibanez EH10
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

New Player Friendliness

Schecter Corsair 2020
  • Comfortable shape
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Ibanez EH10

Roasted Maple wood pattern used for guitar building
Roasted Maple
Jatoba wood pattern used for guitar building
Jatoba
Nyatoh wood pattern used for guitar building
Nyatoh

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.

Nyatoh has been replacing Mahogany for guitar building. It's fairly hard, durable, more sustentable and common than Mahogany. Find out more about Nyatoh.

Woods Used in the Schecter Corsair 2020

Mahogany wood pattern used for guitar building
Mahogany
Ebony wood pattern used for guitar building
Ebony
Maple wood pattern used for guitar building
Maple

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Winner: Schecter Corsair 2020.

Pickup Configuration

The Ibanez EH10 has an HS configuration while the Schecter Corsair 2020 has HH pickups.

An HS configuration gives you a bridge pickup with a lot of output for playing distortion parts, but you'll also have the bright sound of a Tele or Strat neck pickup for your clean tones.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Ibanez EH10 has pickups from a more specialized brand than the Schecter Corsair 2020. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.

You can purchase similar pickups to the Ibanez EH10's and use them on any guitar:

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Ibanez EH10.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Both offer you the same type of pickup mod: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Ibanez EH10.

Final Sound Quality Scores

Ibanez EH10
Pickups 85
Sustain 80
Versatility 79
Tuning Stability 75
Sound 80
Schecter Corsair 2020
Pickups 60
Sustain 70
Versatility 68
Tuning Stability 65
Sound 66

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Ibanez EH10 compares to the Schecter Corsair 2020.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Ivory Tusq nuts. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Ibanez EH10 is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Ibanez EH10.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Ibanez EH10's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the Schecter Corsair 2020's is a Bigsby Tremolo. Bigsby tremolos are built differently than regular tremolos. They have a stiffer arm, which is something a lot of people like because the arm won't wiggle around a lot. On the other hand, this type of tremolo is more complicated to restring and it might not be as newbie-friendly as other simpler tremolos.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Schecter Corsair 2020.

Tuners

The Ibanez EH10 has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Ibanez EH10.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Ibanez EH10 has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the Schecter Corsair 2020 comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Ibanez EH10.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Ibanez EH10
  • Stainless Steel Frets
  • Locking Tuners
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Luminescent Inlay
  • Tremolo
  • Made in Indonesia
  • No Expensive Woods
  • No Neck-Through Build
  • No Weight Relief
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Corsair 2020
  • Expensive Wood
  • Ivory Tusq Nut
  • Coil Split Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Ibanez EH10
Quality of materials 90
Features 75
Quality Control 75
Build Quality 80
Schecter Corsair 2020
Quality of materials 68
Features 65
Quality Control 75
Build Quality 69

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Ibanez EH10 Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Ibanez EH10's Scale Length
Ibanez EH10's Scale Length
Schecter Corsair 2020's Scale Length
Schecter Corsair 2020's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Ibanez EH10 has the longest scale: 25.5". The Schecter Corsair 2020 is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Ibanez EH10 Neck Profile
Ibanez EH10's neck profile
Schecter Corsair 2020 Neck Profile
Schecter Corsair 2020's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Ibanez EH10 and the Schecter Corsair 2020 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Ibanez EH10 Fingerboard Radius
Ibanez EH10's Fingerboard radius
Schecter Corsair 2020 Fingerboard Radius
Schecter Corsair 2020's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Ibanez EH10's fingerboard radius is smaller, which means it's more curved than the Schecter Corsair 2020's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Corsair 2020.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Fret Size

Ibanez EH10 Frets Size
Ibanez EH10's Frets Size
Schecter Corsair 2020 Frets Size
Schecter Corsair 2020's Frets Size

The Ibanez EH10 has Jumbo frets, which should be taller than the Schecter Corsair 2020's Medium frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Ibanez EH10
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 90
Playability 77
Schecter Corsair 2020
Bending & Vibrato Ease 80
Chord Playability 75
Solo Playability 70
Playability 75