Swap
Swap
Ibanez AZ2407F Prestige
Schecter C-1 FR SLS Elite
VS
Playability
77
Sound
79
Build
83
Value
70
Score
80
FIND IT ON:
Reverb logoSweetwater logoMusician's Friend logo
Playability
80
Sound
81
Build
80
Value
80
Score
80
FIND IT ON:
Reverb logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

Ibanez AZ2407F Prestige vs Schecter C-1 FR SLS Elite

Reasons to Get
Ibanez AZ2407F Prestige over Schecter C-1 FR SLS Elite

Country of Manufacturing
Japan vs South Korea
Built with higher quality standards
Release Year
2023 vs 2018
From a more recent year
Switch Positions
5 vs 3
More tone options
Pickups
HSH vs HH
High output, round sound with a single-coil for cleans
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.81'' (20.6mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.89'' (22.6mm) vs 0.787'' (20mm)
More comfortable at higher frets for big hands
Nut Width
1.654'' (42mm) vs 1.625'' (41.3mm)
Less likely to mute strings by accident and more space for fingerstyle
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Tremolo vs Floyd Rose
Simple vibratos without too much maintenance
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Reasons to Get
Schecter C-1 FR SLS Elite over Ibanez AZ2407F Prestige

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Compound Radius
12" to 16" vs 12"
Balanced playability for chords and single-notes
Pickup Mods
Multi-Voicing vs None
Changes the voice (tones or gain) of the pickups
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Pickups
HH vs HSH
High output without hum
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.81'' (20.6mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 0.89'' (22.6mm)
More comfortable at higher frets for small hands
Nut Width
1.625'' (41.3mm) vs 1.654'' (42mm)
Favors small hands, easier bar chords and other shapes
Bridge
Floyd Rose vs Tremolo
Allows intense vibratos and techniques like Dive Bombs
Pickups Power
Active vs Passive
More output
Value Score
80 vs 70
Better price/quality relationship

Other Key Differences
Ibanez AZ2407F Prestige vs Schecter C-1 FR SLS Elite

Bridge Pickup
DiMarzio The Tone Zone vs Fishman Fluence Modern Ceramic
Different Bridge Pickup
Neck Pickup
DiMarzio Air Norton vs Fishman Fluence Modern Alnico
Different Neck Pickup
Body Wood
Basswood vs Ash
Different Body Wood
Neck Wood
Roasted Maple vs Maple
Different Neck Wood
Fretboard Wood
Roasted Maple vs Ebony
Different Fretboard Wood
Headstock
6 vs 3-3
Different Headstock
Nut Material
Bone vs Locking
Different Nut Material

Shared Features
Ibanez AZ2407F Prestige vs Schecter C-1 FR SLS Elite

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Decorative Top
Flamed Maple (4mm) vs Flamed Maple
Finished with beautiful natural wood patterns
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Jumbo vs XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • High-Quality Frets
  • Top Pickup Brand

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

Schecter C-1 FR SLS Elite Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 80 out of 100, which makes them similar in terms of quality.

The Schecter C-1 FR SLS Elite wins when it comes to sound, playability, value for the money. On the other hand, the Ibanez AZ2407F Prestige has the upper hand when it comes to build quality.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Ibanez AZ2407F Prestige is the better choice.

The Ibanez AZ2407F Prestige meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter C-1 FR SLS Elite meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Ibanez AZ2407F Prestige
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

New Player Friendliness

Schecter C-1 FR SLS Elite
  • Comfortable shape
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Ibanez AZ2407F Prestige Overview

  • From Ibanez's 2023 AZ series
  • Made in Japan
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Flamed Maple (4mm) top
  • Basswood body
  • Roasted Maple neck
  • Roasted Maple fretboard
  • Bridge pickup: DiMarzio The Tone Zone (Humbucker/Passive)
  • Middle pickup: DiMarzio True Velvet (Single Coil/Passive)
  • Neck pickup: DiMarzio Air Norton (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 5-way Switch
  • Gotoh T1502S bridge
  • AZ Oval C Bolt-On neck
  • 24 Jumbo Stainless Steel frets
  • Gotoh MG-T locking machine heads tuners
  • Compare Specs >

Schecter C-1 FR SLS Elite Overview

  • From Schecter's 2018 SLS Elite series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Flamed Maple top
  • Swamp Ash body
  • Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose 1500 Series bridge
  • Ultra Thin C Neck-Through neck
  • 24 XL Jumbo Stainless Steel frets
  • Grover Rotomatic 18:1 tuners
  • Weight between 7.75lbs (3.5kgs) and 8.25lbs (3.7kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Ibanez AZ2407F Prestige

Roasted Maple wood pattern used for guitar building
Roasted Maple
Basswood wood pattern used for guitar building
Basswood

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Woods Used in the Schecter C-1 FR SLS Elite

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony
Ash wood pattern used for guitar building
Ash

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Winner: Schecter C-1 FR SLS Elite.

Pickup Configuration

The Ibanez AZ2407F Prestige has an HSH configuration while the Schecter C-1 FR SLS Elite has HH pickups.

HSH is a versatile pickup configuration that will give you the high output, full tone, and quiet sound of humbucker pickups, but with the possibility of using a single coil for cleaner tones. The disadvantage is that the middle single-coil pickup will have a noticeable lower volume, so you might want to adjust the height of the pickups. Another problem is that if you set the middle pickup too high, it might interfere with your picking hand.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

You can purchase similar pickups to the Ibanez AZ2407F Prestige's and use them on any guitar:

We found the same or similar pickups to the Schecter C-1 FR SLS Elite's online:

The Ibanez AZ2407F Prestige's pickups are Passive while the Schecter C-1 FR SLS Elite's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Ibanez AZ2407F Prestige gives you 5 switch options while the Schecter C-1 FR SLS Elite gives you 3. This means that the Ibanez AZ2407F Prestige gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the Schecter C-1 FR SLS Elite comes with some kind of pickup modification: Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

Ibanez AZ2407F Prestige pickups switch selector and push knobs diagram
Ibanez AZ2407F Prestige's switch options
Schecter C-1 FR SLS Elite pickups switch and push knobs diagram
Schecter C-1 FR SLS Elite's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Ibanez AZ2407F Prestige.

Final Sound Quality Scores

Ibanez AZ2407F Prestige
Pickups 85
Sustain 80
Versatility 75
Tuning Stability 75
Sound 79
Schecter C-1 FR SLS Elite
Pickups 85
Sustain 85
Versatility 69
Tuning Stability 85
Sound 81

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Ibanez AZ2407F Prestige compares to the Schecter C-1 FR SLS Elite.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Ibanez AZ2407F Prestige is built in Japan while the Schecter C-1 FR SLS Elite is made in South Korea.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Ibanez AZ2407F Prestige

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Ibanez AZ2407F Prestige has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Schecter C-1 FR SLS Elite comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Both in this comparison come with stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Ibanez AZ2407F Prestige's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the Schecter C-1 FR SLS Elite's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Schecter C-1 FR SLS Elite.

Tuners

The Ibanez AZ2407F Prestige has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Nevertheless, the Schecter C-1 FR SLS Elite has a locking nut, so it should have even better tune stability and doesn't need locking tuners.

Winner: Ibanez AZ2407F Prestige.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Ibanez AZ2407F Prestige has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the Schecter C-1 FR SLS Elite comes with Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

Winner: Schecter C-1 FR SLS Elite.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Ibanez AZ2407F Prestige
  • Stainless Steel Frets
  • Locking Tuners
  • Made in Japan
  • Bone Nut
  • Top Brand Pickups
  • Luminescent Inlay
  • Tremolo
  • No Expensive Woods
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter C-1 FR SLS Elite
  • Stainless Steel Frets
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Multi-Voicing Pickups
  • Tremolo
  • Compound Radius Fretboard
  • Retainer Bar
  • No Locking Tuners
  • Made in South Korea
  • No Weight Relief
  • No Luminescent Inlay
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Ibanez AZ2407F Prestige
Quality of materials 85
Features 70
Quality Control 95
Build Quality 83
Schecter C-1 FR SLS Elite
Quality of materials 75
Features 90
Quality Control 75
Build Quality 80

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Ibanez AZ2407F Prestige Nut Width
Ibanez AZ2407F Prestige Nut Width
Schecter C-1 FR SLS Elite Nut Width
Schecter C-1 FR SLS Elite Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Ibanez AZ2407F Prestige has the wider nut with 42mm (1.654'') vs 41.3mm (1.625''). This is a 0.7mm (0.029'') difference

This means that it will be more difficult to do bar chords on the Ibanez AZ2407F Prestige, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Ibanez AZ2407F Prestige and Schecter C-1 FR SLS Elite's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Ibanez AZ2407F Prestige Neck Profile
Ibanez AZ2407F Prestige's neck profile
Schecter C-1 FR SLS Elite Neck Profile
Schecter C-1 FR SLS Elite's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Ibanez AZ2407F Prestige and the Schecter C-1 FR SLS Elite have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Ibanez AZ2407F Prestige Fingerboard Radius
Ibanez AZ2407F Prestige's Fingerboard radius
Schecter C-1 FR SLS Elite Fretboard Compound Radius
Schecter C-1 FR SLS Elite's Compound Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Schecter C-1 FR SLS Elite is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Ibanez AZ2407F Prestige:
Big Hands
Small Hands
Schecter C-1 FR SLS Elite:
Big Hands
Small Hands

Fret Size

Ibanez AZ2407F Prestige Frets Size
Ibanez AZ2407F Prestige's Frets Size
Schecter C-1 FR SLS Elite Frets Size
Schecter C-1 FR SLS Elite's Frets Size

The Schecter C-1 FR SLS Elite has XL Jumbo frets, which should be taller than the Ibanez AZ2407F Prestige's Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Ibanez AZ2407F Prestige
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 90
Playability 77
Schecter C-1 FR SLS Elite
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 100
Playability 80

Specs Side-by-Side

Ibanez AZ2407F Prestige vs Schecter C-1 FR SLS Elite
General Ibanez AZ2407F Prestige Schecter C-1 FR SLS Elite
Brand: Ibanez Schecter
Year: 2023 2018
Configuration: HSH HH
Strings: 6 6
Made in: Japan South Korea
Series: AZ SLS Elite
Colors: Blue, Brown Black, Orange
Left-Handed Version: No Yes
Body
Type: Solid Body Solid Body
Body Material: Basswood Swamp Ash
Bridge: Gotoh T1502S Floyd Rose 1500 Series
Neck
Neck Joint: Bolt-On Neck-Through
Tuners: Gotoh MG-T locking machine heads Grover Rotomatic 18:1
Fretboard: Roasted Maple Ebony
Neck Material: Roasted Maple Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods
Decoration: Abalone dot Abalone Offset/Reverse Dots
Scale Size: 25.5" 25.5"
Shape: AZ Oval C Ultra Thin C
Thickness: 1st Fret: 0.81'' (20.6mm) - 12th Fret: 0.89'' (22.6mm) 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm)
Frets: 24 Jumbo Stainless Steel 24 XL Jumbo Stainless Steel
Fretboard Radius: 12" 12" to 16"
Nut: Bone Locking
Nut Width: 42mm (1.654'') 41.3mm (1.625'')
Electronics
Bridge Pickup: DiMarzio The Tone Zone (Humbucker / Passive) Fishman Fluence Modern Ceramic (Humbucker / Active)
Middle Pickup: DiMarzio True Velvet (Single Coil / Passive)
Neck Pickup: DiMarzio Air Norton (Humbucker / Passive) Fishman Fluence Modern Alnico (Humbucker / Active)
Switch: 5 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Multi-Voicing
Volume Controls: 1 1
Tone Controls: 1 1