Swap
Swap
Ibanez AR520HFM
Ibanez AR520H
VS
Playability
73
Sound
64
Build
55
Value
69
Score
64
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logo
Playability
73
Sound
64
Build
55
Value
69
Score
64
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logo
Add more to comparison

Ibanez AR520HFM vs AR520H

Reasons to Get
Ibanez AR520HFM over AR520H

Reasons to Get
Ibanez AR520H over AR520HFM

Avg. Weight
6.725lbs (3.1kgs) vs 6.925lbs (3.1kgs)
Tends to be lighter

Other Key Differences
Ibanez AR520HFM vs AR520H

No Key Differences Found

Shared Features
Ibanez AR520HFM vs AR520H

Bridge Pickup
Super 58
Same Bridge Pickup
Neck Pickup
Super 58
Same Neck Pickup
Body Wood
Maple
Same Body Wood
Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Jatoba
Same Fretboard Wood
Headstock
3-3
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Body Type
Semi-Hollow
Lighter and allows more gain than a hollowbody
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
22
Same maximum octave
Neck Thickness at 1st Fret
0.79'' (20.1mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.87'' (22.1mm)
Same neck comfortability
Nut Width
1.693'' (43mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm)
Same string tension and fret separation
Fretboard Radius
12'' (304.8mm)
Same fretboard comfortability
Pickups Power
Passive
Cleaner sound and no battery needed
Decorative Top
Flamed Maple vs Maple
Finished with beautiful natural wood patterns
Neck Profile Type
SA
Thin neck for playing fast
Neck Joint
Set
Neck is glued to the body
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Pickup Alter Switch/Knob

Common Weaknesses

  • Neck-Through Build
  • Locking Tuners
  • Stays in Tune (Evertune)
  • High-Quality Nut
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • Expensive Wood
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 64 out of 100, which makes them similar in terms of quality.

The Ibanez AR520H wins when it comes to. On the other hand, the Ibanez AR520HFM has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 4 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Ibanez AR520HFM
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

New Player Friendliness

Ibanez AR520H
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Ibanez AR520HFM Overview

  • From Ibanez's 2021 AR series
  • Made in China
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Flamed Maple top
  • Maple body
  • 3pc Maple neck
  • Bound Jatoba fretboard
  • Bridge pickup: Super 58 (Humbucker/Passive)
  • Neck pickup: Super 58 (Humbucker/Passive)
  • 1 volume and 1 tone Speed knobs
  • 3-way Switch
  • Gibraltar Performer bridge
  • AR Set neck
  • 22 Medium frets
  • Ibanez tuners
  • Weight between 6.65lbs (3kgs) and 7.2lbs (3.3kgs)
  • Compare Specs >

Ibanez AR520H Overview

  • From Ibanez's 2021 AR series
  • Made in China
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Maple top
  • Maple body
  • 3pc Maple neck
  • Bound Jatoba fretboard
  • Bridge pickup: Super 58 (Humbucker/Passive)
  • Neck pickup: Super 58 (Humbucker/Passive)
  • 1 volume and 1 tone Speed knobs
  • 3-way Switch
  • Gibraltar Performer bridge
  • AR Set neck
  • 22 Medium frets
  • Ibanez tuners
  • Weight between 6.65lbs (3kgs) and 6.8lbs (3.1kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Jatoba wood pattern used for guitar building
Jatoba

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

None of these use a specialized pickup brand for their pickups. Some of the best guitars on the market come with pickups from brands like EMG, Seymour Duncan, DiMarzio, etc. You might want to replace your pickups eventually if you want to get the best sound out of any of these instruments.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Both offer you the same type of pickup mod: Tri-Sound.

Tri-Sound gives you the choice of using the pickup coils at the same time, splitting them or connect them im parallel for a brighter sound.

They both share the following switching options:

Ibanez AR520HFM and Ibanez AR520H pickups switch and push knobs diagram
Ibanez AR520HFM and Ibanez AR520H's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Tie.

Final Sound Quality Scores

Ibanez AR520HFM
Pickups 60
Sustain 70
Versatility 59
Tuning Stability 65
Sound 64
Ibanez AR520H
Pickups 60
Sustain 70
Versatility 59
Tuning Stability 65
Sound 64

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Ibanez AR520HFM compares to the Ibanez AR520H.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. Both come with Ibanez.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Ibanez AR520HFM
  • Tri-Sound Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Ibanez AR520H
  • Tri-Sound Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Ibanez AR520HFM
Quality of materials 45
Features 60
Quality Control 60
Build Quality 55
Ibanez AR520H
Quality of materials 45
Features 60
Quality Control 60
Build Quality 55

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Ibanez AR520HFM Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').

This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

Scale Length

Ibanez AR520HFM and Ibanez AR520H's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.75".

This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.

On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Ibanez AR520HFM Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Ibanez AR520HFM and the Ibanez AR520H have a SA-shaped neck. Like most Ibanez necks, it's thinner than most modern C necks. It's very similar in thickness and shape to their unique Wizard profile.

Fretboard Radius

Ibanez AR520HFM Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Ibanez AR520HFM and the Ibanez AR520H have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Ibanez AR520HFM:
Big Hands
Small Hands
Ibanez AR520H:
Big Hands
Small Hands

Fret Size

Ibanez AR520HFM and Ibanez AR520H Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Ibanez AR520HFM
Bending & Vibrato Ease 85
Chord Playability 65
Solo Playability 70
Playability 73
Ibanez AR520H
Bending & Vibrato Ease 85
Chord Playability 65
Solo Playability 70
Playability 73

Specs Side-by-Side

Ibanez AR520HFM vs AR520H
General Ibanez AR520HFM AR520H
Brand: Ibanez Ibanez
Year: 2021 2021
Configuration: HH HH
Strings: 6 6
Made in: China China
Series: AR AR
Colors: Sunburst Black
Left-Handed Version: No No
Body
Type: Semi-Hollow Semi-Hollow
Body Material: Maple Maple
Bridge: Gibraltar Performer Gibraltar Performer
Neck
Neck Joint: Set Set
Tuners: Ibanez Ibanez
Fretboard: Bound Jatoba Bound Jatoba
Neck Material: 3pc Maple 3pc Maple
Decoration: Acrylic & Abalone block Acrylic & Abalone block
Scale Size: 24.75" 24.75"
Shape: AR AR
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 22 Medium Nickel Silver 22 Medium Nickel Silver
Fretboard Radius: 12" 12"
Nut: Plastic Plastic
Nut Width: 43mm (1.693'') 43mm (1.693'')
Electronics
Bridge Pickup: Super 58 (Humbucker / Passive) Super 58 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Super 58 (Humbucker / Passive) Super 58 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Speed Speed
Pickup Mods: Tri-Sound Tri-Sound
Volume Controls: 1 1
Tone Controls: 1 1