Show Full Spec Comparison
| Harley Benton TE-90FLT | Squier Classic Vibe 60s Stratocaster | |
|---|---|---|
| General | ||
| Brand: | Harley Benton | Fender Squier |
| Year: | 2017 | 2019 |
| Configuration: | HH | SSS |
| Strings: | 6 | 6 |
| Made in: | Indonesia | Indonesia |
| Series: | Deluxe | Classic Vibe |
| Colors: | White, Blue, Green, Red, Gray | Blue, Red, 3-Color Sunburst |
| Left-Handed Version: | Yes | Yes |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Sungkai | Nyatoh |
| Bridge: | WSC BG2002D with string guide through the body | 6-Saddle Vintage-Style Synchronized Tremolo |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Wsc Diecast Kluson Style Machine Heads | Vintage-Style |
| Fretboard: | Sungkai | Indian Laurel |
| Neck Material: | Maple | Maple |
| Decoration: | Black dot fretboard inlays | White Dot |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Harley Benton Modern C | Modern C |
| Thickness: | 1st Fret: 0.807'' (20.5mm) - 12th Fret: 0.886'' (22.5mm) | 1st Fret: - 12th Fret: |
| Frets: | 22 Medium Jumbo Nickel Silver | 21 Narrow Tall Nickel Silver |
| Fretboard Radius: | 13.78" | 9.5" |
| Nut: | Ivory Tusq | Bone |
| Nut Width: | 42mm (1.654'') | 42mm (1.654'') |
| Electronics | ||
| Bridge Pickups: | Roswell FLT-B FilterTron Style (Humbucker / Passive) | Fender Designed Alnico Single-Coil (Single Coil / Passive) |
| Middle Pickup: | Fender Designed Alnico Single-Coil (Single Coil / Passive) | |
| Neck Pickup: | Roswell FLT-B FilterTron Style (Humbucker / Passive) | Fender Designed Alnico Single-Coil (Single Coil / Passive) |
| Switch: | 3 Way | 5 Way |
| Knobs: | Dome | Bell |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 2 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Nickel |
Show Diagrams Comparison
Reasons to Get
Harley Benton TE-90FLT over Squier Classic Vibe 60s Stratocaster
Reasons to Get
Fender Squier Classic Vibe 60s Stratocaster over Harley Benton TE-90FLT
Other Key Differences
Harley Benton TE-90FLT vs Squier Classic Vibe 60s Stratocaster
Shared Features
Harley Benton TE-90FLT vs Squier Classic Vibe 60s Stratocaster
Common Strengths
- High-Quality Nut
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- Expensive Wood
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Squier Classic Vibe 60s Stratocaster favors large hands more than the Harley Benton TE-90FLT. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Harley Benton TE-90FLT:
Fender Squier Classic Vibe 60s Stratocaster:
Beginner Friendliness
The Fender Squier Classic Vibe 60s Stratocaster meets 6 out of our 8 criteria items for beginner friendliness, while the Harley Benton TE-90FLT meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Harley Benton TE-90FLT- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
New Player Friendliness
Fender Squier Classic Vibe 60s Stratocaster- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Harley Benton TE-90FLT
It's native to Indonesia, so it's cheap to use in guitar factories located in this country. People describe it as a resonant wood that looks similar to American Ash.
Woods Used in the Fender Squier Classic Vibe 60s Stratocaster
There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.
Nyatoh has been replacing Mahogany for guitar building. It's fairly hard, durable, more sustentable and common than Mahogany. Find out more about Nyatoh.
Winner: Tie.
Pickup Configuration
The Harley Benton TE-90FLT has an HH configuration while the Fender Squier Classic Vibe 60s Stratocaster has SSS pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, SSS is perfect for players who like to play clean. The definition you get between notes and the crispiness is unmatched by most other configurations. You can still use it for distortion, but you won't get the same kind of output and power compared to a humbucker, and the hum they produce also makes them less adequate for high gain.
Pickups Quality
The Harley Benton TE-90FLT has pickups from a more specialized brand than the Fender Squier Classic Vibe 60s Stratocaster. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Harley Benton TE-90FLT.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender Squier Classic Vibe 60s Stratocaster gives you 5 switch options while the Harley Benton TE-90FLT gives you 3. This means that the Fender Squier Classic Vibe 60s Stratocaster gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Squier Classic Vibe 60s Stratocaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton TE-90FLT compares to the Fender Squier Classic Vibe 60s Stratocaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Harley Benton TE-90FLT has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Fender Squier Classic Vibe 60s Stratocaster comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Harley Benton TE-90FLT's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Fender Squier Classic Vibe 60s Stratocaster's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Harley Benton TE-90FLT's are Wsc Diecast Kluson Style Machine Heads while the Fender Squier Classic Vibe 60s Stratocaster's are Vintage-Style
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Harley Benton TE-90FLT
- Ivory Tusq Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender Squier Classic Vibe 60s Stratocaster
- Bone Nut
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Expensive Woods
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').
This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Harley Benton TE-90FLT and the Fender Squier Classic Vibe 60s Stratocaster have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Squier Classic Vibe 60s Stratocaster's fingerboard radius is smaller, which means it's more curved than the Harley Benton TE-90FLT's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Harley Benton TE-90FLT.
Fret Size
The Fender Squier Classic Vibe 60s Stratocaster has Narrow Tall frets, which should be taller than the Harley Benton TE-90FLT's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
