Show Full Spec Comparison
| Harley Benton TE-20MN | LTD M-1000 Multi-Scale | |
|---|---|---|
| General | ||
| Brand: | Harley Benton | ESP LTD |
| Year: | 2020 | 2020 |
| Configuration: | SS | HH |
| Strings: | 6 | 6 |
| Made in: | China | Indonesia |
| Series: | Standard | M |
| Colors: | Blue, Red | Black |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Basswood | Mahogany |
| Bridge: | Harley Benton | Hipshot w/ String Thru |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Die-Cast Machine Heads | LTD Locking |
| Fretboard: | Maple | Macassar Ebony |
| Neck Material: | Maple | 5pc Maple/Purple Heart |
| Decoration: | Dot-Inlays | Offset Dots |
| Scale Size: | 25.5" | 26.5" to 25.5" |
| Shape: | Harley Benton Modern C | Thin U |
| Thickness: | 1st Fret: 0.807'' (20.5mm) - 12th Fret: 0.886'' (22.5mm) | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) |
| Frets: | 22 Medium Jumbo Nickel Silver | 24 XL Jumbo Stainless Steel |
| Fretboard Radius: | 13.78" | 13.78" |
| Nut: | Plastic | Bone |
| Nut Width: | 42mm (1.654'') | 42mm (1.654'') |
| Electronics | ||
| Bridge Pickups: | HB Single Coil (Single Coil / Passive) | Seymour Duncan Nazgul (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | HB Single Coil (Single Coil / Passive) | Seymour Duncan Sentient (Humbucker / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | Coil Split |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Black |
Show Diagrams Comparison
Reasons to Get
Harley Benton TE-20MN over LTD M-1000 Multi-Scale
Reasons to Get
ESP LTD M-1000 Multi-Scale over Harley Benton TE-20MN
Other Key Differences
Harley Benton TE-20MN vs LTD M-1000 Multi-Scale
Shared Features
Harley Benton TE-20MN vs LTD M-1000 Multi-Scale
Common Strengths
- High-Quality Frets
Common Weaknesses
- Neck-Through Build
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the ESP LTD M-1000 Multi-Scale favors large hands more than the Harley Benton TE-20MN. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Harley Benton TE-20MN:
ESP LTD M-1000 Multi-Scale:
Beginner Friendliness
The ESP LTD M-1000 Multi-Scale meets 6 out of our 8 criteria items for beginner friendliness, while the Harley Benton TE-20MN meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Harley Benton TE-20MN- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
New Player Friendliness
ESP LTD M-1000 Multi-Scale- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Harley Benton TE-20MN
Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.
Woods Used in the ESP LTD M-1000 Multi-Scale
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Winner: ESP LTD M-1000 Multi-Scale.
Pickup Configuration
The Harley Benton TE-20MN has an SS configuration while the ESP LTD M-1000 Multi-Scale has HH pickups.
SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
The ESP LTD M-1000 Multi-Scale pickups from a more specialized brand than the Harley Benton TE-20MN. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.
We found the same or similar pickups to the ESP LTD M-1000 Multi-Scale's online:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: ESP LTD M-1000 Multi-Scale.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the ESP LTD M-1000 Multi-Scale comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: ESP LTD M-1000 Multi-Scale.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton TE-20MN compares to the ESP LTD M-1000 Multi-Scale.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Harley Benton TE-20MN is built in China while the ESP LTD M-1000 Multi-Scale is made in Indonesia.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: ESP LTD M-1000 Multi-Scale
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Harley Benton TE-20MN has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
On the other hand, the ESP LTD M-1000 Multi-Scale comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: ESP LTD M-1000 Multi-Scale.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the ESP LTD M-1000 Multi-Scale is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: ESP LTD M-1000 Multi-Scale.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The ESP LTD M-1000 Multi-Scale has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: ESP LTD M-1000 Multi-Scale.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Harley Benton TE-20MN
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No Expensive Woods
- No High-Quality Nut
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
ESP LTD M-1000 Multi-Scale
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Coil Split Pickups
- Made in Indonesia
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').
This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, the ESP LTD M-1000 Multi-Scale features a multi-scale of 26.5" to 25.5" while the Harley Benton TE-20MN has a regular scale of 25.5".
A multi-scale fingerboard incorporates two scale lengths at the same time. This is present in some instruments with long scale to give a different tension to the lower strings than the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.
It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.
On the other hand, the Harley Benton TE-20MN's 25.5" regular scale means it has a fixed scale for all the strings.This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Harley Benton TE-20MN has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The ESP LTD M-1000 Multi-Scale, on the other hand, has a U neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Harley Benton TE-20MN and the ESP LTD M-1000 Multi-Scale have the same fretboard radius of 13.78". It's closer to the 12'' that most Les Paul guitars have, but it's a bit flatter. It'll make it easier to play single notes than chords, but it's still relatively comfortable for chords.
Fret Size
The ESP LTD M-1000 Multi-Scale has XL Jumbo frets, which should be taller than the Harley Benton TE-20MN's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
