Swap
Swap
Harley Benton ST-20
Harley Benton TE-20HH
VS
Playability
70
Sound
64
Build
52
Value
82
Score
62
FIND IT ON:
Thomann logo
Playability
72
Sound
62
Build
50
Value
76
Score
61
FIND IT ON:
Thomann logo
Add more to comparison

Harley Benton ST-20 vs TE-20HH

Reasons to Get
Harley Benton ST-20 over TE-20HH

Switch Positions
5 vs 3
More tone options
Tone Knobs
2 vs 1
More tone control
Pickups
SSS vs HH
Beautiful cleans and good tone versatility
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Fretboard Radius
13.78'' (350mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
82 vs 76
Better price/quality relationship

Reasons to Get
Harley Benton TE-20HH over ST-20

Release Year
2020 vs 2014
From a more recent year
Pickups
HH vs SSS
High output without hum
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Fretboard Radius
12'' (304.8mm) vs 13.78'' (350mm)
More curved fretboard helpful to play chords without muting strings

Other Key Differences
Harley Benton ST-20 vs TE-20HH

Bridge Pickup
HB Single Coil vs HB Humbucker
Different Bridge Pickup
Neck Pickup
HB Single Coil vs HB Humbucker
Different Neck Pickup

Shared Features
Harley Benton ST-20 vs TE-20HH

Body Wood
Basswood
Same Body Wood
Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Roseacer
Same Fretboard Wood
Headstock
6
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Number of Frets
22
Same maximum octave
Neck Thickness at 1st Fret
0.807'' (20.5mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.886'' (22.5mm)
Same neck comfortability
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Bolt-On
Allows you to detach and swap the neck
Type of Frets
Medium Jumbo
You'll feel the fretboard when pressing down the strings

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Weight Relief
  • Locking Tuners
  • Stays in Tune (Evertune)
  • High-Quality Nut
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • Expensive Wood
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Harley Benton ST-20 is probably the better product overall with its final score of 62 compared to the Harley Benton TE-20HH's 61 score, although not by a lot.

The Harley Benton ST-20 wins when it comes to sound, build quality, value for the money. On the other hand, the Harley Benton TE-20HH has the upper hand when it comes to playability.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Harley Benton ST-20
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Harley Benton TE-20HH
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Harley Benton ST-20 Overview

  • From Harley Benton's 2014 Standard series
  • Made in China
  • 6 strings
  • 25.5"'' scale
  • 13.78" Fretboard Radius
  • Basswood body
  • Maple neck
  • Roseacer fretboard
  • Bridge pickup: HB Single Coil (Single Coil/Passive)
  • Middle pickup: HB Single Coil (Single Coil/Passive)
  • Neck pickup: HB Single Coil (Single Coil/Passive)
  • 1 volume and 2 tone Bell knobs
  • 5-way Switch
  • Harley Benton Tremolo bridge
  • Harley Benton Modern C Bolt-On neck
  • 22 Medium Jumbo frets
  • Machine Heads: Enclosed tuners
  • Compare Specs >

Harley Benton TE-20HH Overview

  • From Harley Benton's 2020 Standard series
  • Made in China
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Basswood Body body
  • Maple neck
  • Roseacer fretboard
  • Bridge pickup: HB Humbucker (Humbucker/Passive)
  • Neck pickup: HB Humbucker (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Dlx Te Bridge bridge
  • Harley Benton Modern C Bolt-On neck
  • 22 Medium Jumbo frets
  • Dlx Diecast Machine Heads tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Roseacer wood pattern used for guitar building
Roseacer
Basswood wood pattern used for guitar building
Basswood

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

It's also known as roasted maple, which is regular maple that has been treated with heat to remove humidity. It makes it more resistant to temperature changes and also darkens its color.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Winner: Tie.

Pickup Configuration

The Harley Benton ST-20 has an SSS configuration while the Harley Benton TE-20HH has HH pickups.

SSS is perfect for players who like to play clean. The definition you get between notes and the crispiness is unmatched by most other configurations. You can still use it for distortion, but you won't get the same kind of output and power compared to a humbucker, and the hum they produce also makes them less adequate for high gain.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Harley Benton ST-20 has pickups from a more specialized brand than the Harley Benton TE-20HH. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Funk and similar genres.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Harley Benton ST-20.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Harley Benton ST-20 gives you 5 switch options while the Harley Benton TE-20HH gives you 3. This means that the Harley Benton ST-20 gives you more options to find the right pickup combination for the type of sound you want to achieve

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

Harley Benton ST-20 pickups switch selector and push knobs diagram
Harley Benton ST-20's switch options
Harley Benton TE-20HH pickups switch and push knobs diagram
Harley Benton TE-20HH's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Harley Benton ST-20.

Final Sound Quality Scores

Harley Benton ST-20
Pickups 70
Sustain 55
Versatility 72
Tuning Stability 60
Sound 64
Harley Benton TE-20HH
Pickups 60
Sustain 70
Versatility 54
Tuning Stability 65
Sound 62

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton ST-20 compares to the Harley Benton TE-20HH.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Harley Benton ST-20's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the Harley Benton TE-20HH's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. The Harley Benton ST-20's are Machine Heads: Enclosed while the Harley Benton TE-20HH's are Dlx Diecast Machine Heads

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Harley Benton ST-20
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Harley Benton TE-20HH
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Harley Benton ST-20
Quality of materials 46
Features 55
Quality Control 55
Build Quality 52
Harley Benton TE-20HH
Quality of materials 46
Features 50
Quality Control 55
Build Quality 50

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Harley Benton ST-20 Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Harley Benton ST-20 and Harley Benton TE-20HH's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Harley Benton ST-20 Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Harley Benton ST-20 and the Harley Benton TE-20HH have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Harley Benton ST-20 Fingerboard Radius
Harley Benton ST-20's Fingerboard radius
Harley Benton TE-20HH Fingerboard Radius
Harley Benton TE-20HH's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Harley Benton TE-20HH's fingerboard radius is smaller, which means it's more curved than the Harley Benton ST-20's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Harley Benton ST-20.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Harley Benton ST-20:
Big Hands
Small Hands
Harley Benton TE-20HH:
Big Hands
Small Hands

Fret Size

Harley Benton ST-20 and Harley Benton TE-20HH Frets Size
Both have a similar Medium Jumbo fret size

Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.

Final Playability Scores

Harley Benton ST-20
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 70
Playability 70
Harley Benton TE-20HH
Bending & Vibrato Ease 75
Chord Playability 70
Solo Playability 70
Playability 72

Specs Side-by-Side

Harley Benton ST-20 vs TE-20HH
General Harley Benton ST-20 TE-20HH
Brand: Harley Benton Harley Benton
Year: 2014 2020
Configuration: SSS HH
Strings: 6 6
Made in: China China
Series: Standard Standard
Colors: White, Sunburst, Black, Red Black
Left-Handed Version: Yes No
Body
Type: Solid Body Solid Body
Body Material: Basswood Basswood Body
Bridge: Harley Benton Tremolo Dlx Te Bridge
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: Machine Heads: Enclosed Dlx Diecast Machine Heads
Fretboard: Roseacer Roseacer
Neck Material: Maple Maple
Decoration: Dots Dot Fretboard Inlays
Scale Size: 25.5" 25.5"
Shape: Harley Benton Modern C Harley Benton Modern C
Thickness: 1st Fret: 0.807'' (20.5mm) - 12th Fret: 0.886'' (22.5mm) 1st Fret: 0.807'' (20.5mm) - 12th Fret: 0.886'' (22.5mm)
Frets: 22 Medium Jumbo Nickel Silver 22 Medium Jumbo Nickel Silver
Fretboard Radius: 13.78" 12"
Nut: Plastic Plastic
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickup: HB Single Coil (Single Coil / Passive) HB Humbucker (Humbucker / Passive)
Middle Pickup: HB Single Coil (Single Coil / Passive)
Neck Pickup: HB Single Coil (Single Coil / Passive) HB Humbucker (Humbucker / Passive)
Switch: 5 Way 3 Way
Knobs: Bell Dome
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 2 1