Swap
Swap
Harley Benton SC-Custom III
Schecter Hellraiser Hybrid PT
VS
Playability
77
Sound
73
Build
64
Value
81
Score
71
FIND IT ON:
Thomann logoSweetwater logoMusician's Friend logo
Playability
78
Sound
76
Build
69
Value
74
Score
74
FIND IT ON:
Amazon logoSweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Harley Benton SC-Custom III vs Schecter Hellraiser Hybrid PT Specs Comparison
Harley Benton SC-Custom III Schecter Hellraiser Hybrid PT
General
Brand: Harley Benton Schecter
Year: 2024 2015
Configuration: HH HH
Strings: 6 6
Made in: Indonesia South Korea
Series: Custom Line Hellraiser Hybrid
Colors: Gold, Black, Blue, Purple, Yellow, Burst Black, Purple
Left-Handed Version: Yes No
Body
Type: Solid Body Solid Body
Body Material: Meranti Mahogany
Bridge: Wsc Tune-O-Matic Hipshot Hardtail (.125) w/ String Thru Body
Neck
Neck Joint: Set Set
Tuners: Grover Machine Heads Schecter Locking
Fretboard: Jatoba Ebony
Neck Material: Meranti Maple 3-pc
Decoration: White pearloid crown Offset/Reverse Dots
Scale Size: 24.75" 25.5"
Shape: Harley Benton Modern C Ultra Thin C
Thickness: 1st Fret: 0.807'' (20.5mm) - 12th Fret: 0.886'' (22.5mm) 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm)
Frets: 22 Medium Jumbo Stainless Steel 24 XL Jumbo Nickel Silver
Fretboard Radius: 13.78" 12" to 16"
Nut: Graphite Black Tusq XL
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickups: Tesla TM VR-Nitro Alnico-5 (Humbucker / Passive) EMG 57 (Humbucker / Active)
Middle Pickup:
Neck Pickup: Tesla TM VR-Nitro Alnico-5 (Humbucker / Passive) EMG 66 (Humbucker / Active)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: Coil Split None
Volume Controls: 2 1
Tone Controls: 1 1
Hardware
Strap Lock: No No
Hardware Color: Gold Black & Chrome
Show Diagrams Comparison
Harley Benton SC-Custom III pickups switch and push knobs diagram
Harley Benton SC-Custom III's switch options
Schecter Hellraiser Hybrid PT pickups switch and push knobs diagram
Schecter Hellraiser Hybrid PT's switch options

Reasons to Get
Harley Benton SC-Custom III over Schecter Hellraiser Hybrid PT

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2024 vs 2015
From a more recent year
Type of Frets
Medium Jumbo vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Volume Knobs
2 vs 1
More volume control
Neck Thickness at 1st Fret
0.807'' (20.5mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.886'' (22.5mm) vs 0.787'' (20mm)
More comfortable at higher frets for big hands
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Pickups Power
Passive vs Active
Cleaner sound and no battery needed
Value Score
81 vs 74
Better price/quality relationship

Reasons to Get
Schecter Hellraiser Hybrid PT over Harley Benton SC-Custom III

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Compound Radius
12" to 16" vs 13.78"
Balanced playability for chords and single-notes
Nut Material
Black Tusq XL vs Graphite
Good tuning stability with rich tone
Number of Frets
24 vs 22
Allows to reach higher notes
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.807'' (20.5mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 0.886'' (22.5mm)
More comfortable at higher frets for small hands
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone
Pickups Power
Active vs Passive
More output

Other Key Differences
Harley Benton SC-Custom III vs Schecter Hellraiser Hybrid PT

Bridge Pickup
Tesla TM VR-Nitro Alnico-5 vs EMG 57
Different Bridge Pickup
Neck Pickup
Tesla TM VR-Nitro Alnico-5 vs EMG 66
Different Neck Pickup
Body Wood
Meranti vs Mahogany
Different Body Wood
Neck Wood
Meranti vs Maple
Different Neck Wood
Fretboard Wood
Jatoba vs Ebony
Different Fretboard Wood
Nut Material
Graphite vs Black Tusq XL
Different Nut Material

Shared Features
Harley Benton SC-Custom III vs Schecter Hellraiser Hybrid PT

Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Set
Neck is glued to the body

Common Strengths

  • Top Pickup Brand

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Harley Benton SC-Custom III Prices

SET PRICE ALERT

Schecter Hellraiser Hybrid PT Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Hand Size Comfortability

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .

Harley Benton SC-Custom III:
Big Hands
Small Hands
Schecter Hellraiser Hybrid PT:
Big Hands
Small Hands

Beginner Friendliness

The Schecter Hellraiser Hybrid PT meets 7 out of our 8 criteria items for beginner friendliness, while the Harley Benton SC-Custom III meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Harley Benton SC-Custom III
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Schecter Hellraiser Hybrid PT
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Harley Benton SC-Custom III

Meranti wood pattern used for guitar building
Meranti
Jatoba wood pattern used for guitar building
Jatoba

Meranti is an affordable wood used mainly for affordable electric guitars. It's generally lighter and softer than Mahogany. Find out more about Meranti.

Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.

Woods Used in the Schecter Hellraiser Hybrid PT

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony
Mahogany wood pattern used for guitar building
Mahogany

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Winner: Schecter Hellraiser Hybrid PT.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Harley Benton SC-Custom III has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

We found the same or similar pickups to the Schecter Hellraiser Hybrid PT's online:

The Harley Benton SC-Custom III's pickups are Passive while the Schecter Hellraiser Hybrid PT's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Harley Benton SC-Custom III.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the Harley Benton SC-Custom III comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Harley Benton SC-Custom III.

Final Sound Quality Scores

Harley Benton SC-Custom III
Pickups 90
Sustain 70
Versatility 61
Tuning Stability 70
Sound 73
Schecter Hellraiser Hybrid PT
Pickups 85
Sustain 90
Versatility 49
Tuning Stability 80
Sound 76

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton SC-Custom III compares to the Schecter Hellraiser Hybrid PT.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Harley Benton SC-Custom III is built in Indonesia while the Schecter Hellraiser Hybrid PT is made in South Korea.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Harley Benton SC-Custom III has a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.

On the other hand, the Schecter Hellraiser Hybrid PT comes with a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).

Winner: Schecter Hellraiser Hybrid PT.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Harley Benton SC-Custom III is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Harley Benton SC-Custom III.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Schecter Hellraiser Hybrid PT has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Schecter Hellraiser Hybrid PT.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Harley Benton SC-Custom III
  • Stainless Steel Frets
  • Top Brand Pickups
  • Coil Split Pickups
  • No Locking Tuners
  • Made in Indonesia
  • No Expensive Woods
  • No High-Quality Nut
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Hellraiser Hybrid PT
  • Locking Tuners
  • Expensive Wood
  • Black Tusq XL Nut
  • Top Brand Pickups
  • Compound Radius Fretboard
  • Cheap Fret Wire (NS)
  • Made in South Korea
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Harley Benton SC-Custom III
Quality of materials 71
Features 55
Quality Control 65
Build Quality 64
Schecter Hellraiser Hybrid PT
Quality of materials 61
Features 70
Quality Control 75
Build Quality 69

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Harley Benton SC-Custom III Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Harley Benton SC-Custom III's Scale Length
Harley Benton SC-Custom III's Scale Length
Schecter Hellraiser Hybrid PT's Scale Length
Schecter Hellraiser Hybrid PT's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Schecter Hellraiser Hybrid PT has the longest scale: 25.5". The Harley Benton SC-Custom III is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Harley Benton SC-Custom III Neck Profile
Harley Benton SC-Custom III's neck profile
Schecter Hellraiser Hybrid PT Neck Profile
Schecter Hellraiser Hybrid PT's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Harley Benton SC-Custom III and the Schecter Hellraiser Hybrid PT have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Harley Benton SC-Custom III Fingerboard Radius
Harley Benton SC-Custom III's Fingerboard radius
Schecter Hellraiser Hybrid PT Fretboard Compound Radius
Schecter Hellraiser Hybrid PT's Compound Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Schecter Hellraiser Hybrid PT is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Fret Size

Harley Benton SC-Custom III Frets Size
Harley Benton SC-Custom III's Frets Size
Schecter Hellraiser Hybrid PT Frets Size
Schecter Hellraiser Hybrid PT's Frets Size

The Schecter Hellraiser Hybrid PT has XL Jumbo frets, which should be taller than the Harley Benton SC-Custom III's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Harley Benton SC-Custom III
Bending & Vibrato Ease 85
Chord Playability 75
Solo Playability 70
Playability 77
Schecter Hellraiser Hybrid PT
Bending & Vibrato Ease 75
Chord Playability 70
Solo Playability 90
Playability 78