Show Full Spec Comparison
| Harley Benton SC-Custom III P90 | Squier Affinity Series Telecaster | |
|---|---|---|
| General | ||
| Brand: | Harley Benton | Fender Squier |
| Year: | 2024 | 2019 |
| Configuration: | P90P90 | SS |
| Strings: | 6 | 6 |
| Made in: | Indonesia | China |
| Series: | Custom Line | Affinity Series |
| Colors: | Black | White, Black, Green, Orange, Red, Yellow, Gray, 2-Color Sunburst |
| Left-Handed Version: | No | Yes |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Meranti | Poplar |
| Bridge: | Wsc Tune-O-Matic | 6-Saddle Hardtail with Cast Saddles |
| Neck | ||
| Neck Joint: | Set | Bolt-On |
| Tuners: | Grover Machine Heads | Standard Die-Cast |
| Fretboard: | Jatoba | Maple |
| Neck Material: | Meranti | Maple |
| Decoration: | White pearloid crown | Black Dot |
| Scale Size: | 24.75" | 25.5" |
| Shape: | Harley Benton Modern C | Modern C |
| Thickness: | 1st Fret: 0.807'' (20.5mm) - 12th Fret: 0.886'' (22.5mm) | 1st Fret: - 12th Fret: |
| Frets: | 22 Medium Jumbo Stainless Steel | 21 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 13.78" | 9.5" |
| Nut: | Graphite | Synthetic Bone |
| Nut Width: | 42mm (1.654'') | 42mm (1.654'') |
| Electronics | ||
| Bridge Pickups: | Tesla TM P90B Alnico-5 (P90 / Passive) | Standard Single-Coil Tele (Single Coil / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Tesla TM P90N Alnico-5 (P90 / Passive) | Standard Single-Coil Tele (Single Coil / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 2 | 1 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Gold | Chrome |
Show Diagrams Comparison
Reasons to Get
Harley Benton SC-Custom III P90 over Squier Affinity Series Telecaster
Reasons to Get
Fender Squier Affinity Series Telecaster over Harley Benton SC-Custom III P90
Other Key Differences
Harley Benton SC-Custom III P90 vs Squier Affinity Series Telecaster
Shared Features
Harley Benton SC-Custom III P90 vs Squier Affinity Series Telecaster
Common Weaknesses
- Pickup Alter Switch/Knob
- Weight Relief
- Locking Tuners
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- Expensive Wood
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Squier Affinity Series Telecaster favors large hands more than the Harley Benton SC-Custom III P90. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Harley Benton SC-Custom III P90:
Fender Squier Affinity Series Telecaster:
Beginner Friendliness
The Fender Squier Affinity Series Telecaster meets 6 out of our 8 criteria items for beginner friendliness, while the Harley Benton SC-Custom III P90 meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Harley Benton SC-Custom III P90- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
New Player Friendliness
Fender Squier Affinity Series Telecaster- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Harley Benton SC-Custom III P90
Meranti is an affordable wood used mainly for affordable electric guitars. It's generally lighter and softer than Mahogany. Find out more about Meranti.
Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.
Woods Used in the Fender Squier Affinity Series Telecaster
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Poplar is a cheaper and heavier alternative to Alder wood. It terms of tone, it emphasizes the low-end and has cutting mids. It's relatively soft compared to most body woods. Find out more about Poplar.
Winner: Tie.
Pickup Configuration
The Harley Benton SC-Custom III P90 has an P90P90 configuration while the Fender Squier Affinity Series Telecaster has SS pickups.
P90P90 gives you two P90s for a crunchy vintage tone. The tone sits somewhere in the middle between typical single-coils and humbuckers. They also produce less hum than single-coils, but they don't cancel it completely like humbuckers.
On the other hand, SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
Pickups Quality
The Harley Benton SC-Custom III P90 has pickups from a more specialized brand than the Fender Squier Affinity Series Telecaster. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Harley Benton SC-Custom III P90.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Squier Affinity Series Telecaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton SC-Custom III P90 compares to the Fender Squier Affinity Series Telecaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Harley Benton SC-Custom III P90 is built in Indonesia while the Fender Squier Affinity Series Telecaster is made in China.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Winner: Harley Benton SC-Custom III P90
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Harley Benton SC-Custom III P90 has a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.
On the other hand, the Fender Squier Affinity Series Telecaster comes with a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
Winner: Fender Squier Affinity Series Telecaster.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Harley Benton SC-Custom III P90 is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Harley Benton SC-Custom III P90.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Harley Benton SC-Custom III P90's are Grover Machine Heads while the Fender Squier Affinity Series Telecaster's are Standard Die-Cast
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Harley Benton SC-Custom III P90 has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the Fender Squier Affinity Series Telecaster comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Fender Squier Affinity Series Telecaster.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Harley Benton SC-Custom III P90
- Stainless Steel Frets
- Top Brand Pickups
- No Locking Tuners
- Made in Indonesia
- No Expensive Woods
- No High-Quality Nut
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender Squier Affinity Series Telecaster
- Synthetic Bone Nut
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No Expensive Woods
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').
This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Fender Squier Affinity Series Telecaster has the longest scale: 25.5". The Harley Benton SC-Custom III P90 is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Harley Benton SC-Custom III P90 and the Fender Squier Affinity Series Telecaster have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Squier Affinity Series Telecaster's fingerboard radius is smaller, which means it's more curved than the Harley Benton SC-Custom III P90's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Harley Benton SC-Custom III P90.
Fret Size
Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.
