Show Full Spec Comparison
| Harley Benton SC-550 Plus EMG | Jackson X Series Signature Mark Morton Dominion DX2FM | |
|---|---|---|
| General | ||
| Brand: | Harley Benton | Jackson |
| Year: | 2021 | 2014 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | Indonesia | China |
| Series: | Deluxe | Artist Signature |
| Colors: | Orange | Blue |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Okoume | Mahogany |
| Bridge: | WSC LP17 Tune-O-Matic | Jackson TOM-Style Adjustable with Anchored Tailpiece |
| Neck | ||
| Neck Joint: | Set | Neck-Through |
| Tuners: | WSC Schaller Style J07LKF locking machine heads | Jackson Sealed Die-Cast |
| Fretboard: | Jatoba | Laurel |
| Neck Material: | Nyatoh | Maple |
| Decoration: | White Pearloid trapezoid | Pearloid Dot |
| Scale Size: | 24.75" | 24.75" |
| Shape: | 1960 C | Speed |
| Thickness: | 1st Fret: 0.807'' (20.5mm) - 12th Fret: 0.886'' (22.5mm) | 1st Fret: 0.775'' (19.7mm) - 12th Fret: 0.835'' (21.2mm) |
| Frets: | 22 Medium Jumbo Stainless Steel | 22 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 13.78" | 12" to 16" |
| Nut: | Graphite | Plastic |
| Nut Width: | 43mm (1.693'') | 42.9mm (1.688'') |
| Electronics | ||
| Bridge Pickups: | EMG Retro Active Fat 55 (Humbucker / Active) | DiMarzio Mark Morton Signature Dominion (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | EMG Retro Active Fat 55 (Humbucker / Active) | DiMarzio Mark Morton Signature Dominion (Humbucker / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Bell | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 2 | 2 |
| Tone Controls: | 2 | 2 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Black |
Show Diagrams Comparison
Reasons to Get
Harley Benton SC-550 Plus EMG over Jackson X Series Signature Mark Morton Dominion DX2FM
Reasons to Get
Jackson X Series Signature Mark Morton Dominion DX2FM over Harley Benton SC-550 Plus EMG
Other Key Differences
Harley Benton SC-550 Plus EMG vs Jackson X Series Signature Mark Morton Dominion DX2FM
Shared Features
Harley Benton SC-550 Plus EMG vs Jackson X Series Signature Mark Morton Dominion DX2FM
Common Strengths
- Top Pickup Brand
Common Weaknesses
- Pickup Alter Switch/Knob
- Weight Relief
- Stays in Tune (Evertune)
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Harley Benton SC-550 Plus EMG:
Jackson X Series Signature Mark Morton Dominion DX2FM:
Beginner Friendliness
The Harley Benton SC-550 Plus EMG meets 5 out of our 8 criteria items for beginner friendliness, while the Jackson X Series Signature Mark Morton Dominion DX2FM meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Harley Benton SC-550 Plus EMG- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
New Player Friendliness
Jackson X Series Signature Mark Morton Dominion DX2FM- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Comfortable shape
- Narrow nut
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Harley Benton SC-550 Plus EMG
Nyatoh has been replacing Mahogany for guitar building. It's fairly hard, durable, more sustentable and common than Mahogany. Find out more about Nyatoh.
Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.
Okoume is an affordable wood and one of the first to replace Mahogany when the prohibitions started. It's generally softer than Mahogany and the tone has warmer lows.
Woods Used in the Jackson X Series Signature Mark Morton Dominion DX2FM
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Winner: Jackson X Series Signature Mark Morton Dominion DX2FM.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
You can purchase similar pickups to the Harley Benton SC-550 Plus EMG's and use them on any guitar:
The Harley Benton SC-550 Plus EMG's pickups are Active while the Jackson X Series Signature Mark Morton Dominion DX2FM's are Passive.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Jackson X Series Signature Mark Morton Dominion DX2FM.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton SC-550 Plus EMG compares to the Jackson X Series Signature Mark Morton Dominion DX2FM.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Harley Benton SC-550 Plus EMG is built in Indonesia while the Jackson X Series Signature Mark Morton Dominion DX2FM is made in China.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Winner: Harley Benton SC-550 Plus EMG
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Harley Benton SC-550 Plus EMG has a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.
On the other hand, the Jackson X Series Signature Mark Morton Dominion DX2FM comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
Winner: Harley Benton SC-550 Plus EMG.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Harley Benton SC-550 Plus EMG is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Harley Benton SC-550 Plus EMG.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Harley Benton SC-550 Plus EMG has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Harley Benton SC-550 Plus EMG.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Harley Benton SC-550 Plus EMG has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the Jackson X Series Signature Mark Morton Dominion DX2FM comes with Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
Winner: Jackson X Series Signature Mark Morton Dominion DX2FM.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Harley Benton SC-550 Plus EMG
- Stainless Steel Frets
- Locking Tuners
- Top Brand Pickups
- Made in Indonesia
- No Expensive Woods
- No High-Quality Nut
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Jackson X Series Signature Mark Morton Dominion DX2FM
- Expensive Wood
- Top Brand Pickups
- Neck-Through Build
- Compound Radius Fretboard
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No High-Quality Nut
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Harley Benton SC-550 Plus EMG has the wider nut with 43mm (1.693'') vs 42.9mm (1.688''). This is a 0.1mm (0.0050000000000001'') difference
This means that it will be more difficult to do bar chords on the Harley Benton SC-550 Plus EMG, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 24.75".
This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.
On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Harley Benton SC-550 Plus EMG has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Jackson X Series Signature Mark Morton Dominion DX2FM, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Jackson X Series Signature Mark Morton Dominion DX2FM is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Fret Size
Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.
