Show Full Spec Comparison
| Harley Benton Nashville-Steel | PRS SE Hollowbody II | |
|---|---|---|
| General | ||
| Brand: | Harley Benton | PRS |
| Year: | 2022 | 2020 |
| Configuration: | S | HH |
| Strings: | 6 | 6 |
| Made in: | China | Indonesia |
| Series: | Custom Line | SE |
| Colors: | Blue | Black Burst, Tri-Color Sunburst |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Semi-Hollow | Hollowbody |
| Body Material: | Solid Mahogany | Mahogany |
| Bridge: | Walnut | PRS Adjustable Stoptail |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Dlx Machine Heads | PRS Designed Tuners |
| Fretboard: | Jatoba | Ebony |
| Neck Material: | Mahogany | Mahogany |
| Decoration: | Dot fretboard | Birds |
| Scale Size: | 25.5" | 25" |
| Shape: | C Shape | Wide Fat |
| Frets: | 21 Medium Nickel Silver | 22 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 15.748" | 10" |
| Nut: | Plastic | PRS Propietary |
| Nut Width: | 43mm (1.693'') | 42.9mm (1.688'') |
| Electronics | ||
| Bridge Pickups: | Piezo system (bridge) (Preamp / Active) | PRS 58/15 S (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Lipstick single coil (neck) (Single Coil / Passive) | PRS 58/15 S (Humbucker / Passive) |
| Switch: | 0 Way | 3 Way |
| Knobs: | Speed | |
| Pickup Mods: | None | Coil Split |
| Volume Controls: | 0 | 1 |
| Tone Controls: | 0 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Nickel |
Show Diagrams Comparison
Reasons to Get
Harley Benton Nashville-Steel over PRS SE Hollowbody II
Reasons to Get
PRS SE Hollowbody II over Harley Benton Nashville-Steel
Other Key Differences
Harley Benton Nashville-Steel vs PRS SE Hollowbody II
Shared Features
Harley Benton Nashville-Steel vs PRS SE Hollowbody II
Common Strengths
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the PRS SE Hollowbody II favors large hands more than the Harley Benton Nashville-Steel.
Harley Benton Nashville-Steel:
PRS SE Hollowbody II:
Beginner Friendliness
The Harley Benton Nashville-Steel meets 4 out of our 8 criteria items for beginner friendliness, while the PRS SE Hollowbody II meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Harley Benton Nashville-Steel- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
PRS SE Hollowbody II- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable fretboard
- Narrow nut
- Short scale
- Comfortable neck
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Harley Benton Nashville-Steel
Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.
Woods Used in the PRS SE Hollowbody II
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Winner: PRS SE Hollowbody II.
Pickup Configuration
The Harley Benton Nashville-Steel has an S configuration while the PRS SE Hollowbody II has HH pickups.
A single single-coil pickup is not a configuration commonly found in modern electric guitars because it lacks versatility. But if you only want a guitar that sounds very thin and twangy, this might be good enough.
On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
The PRS SE Hollowbody II pickups from a more specialized brand than the Harley Benton Nashville-Steel. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Jazz and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: PRS SE Hollowbody II.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The PRS SE Hollowbody II gives you 3 switch options while the Harley Benton Nashville-Steel gives you 0. This means that the PRS SE Hollowbody II gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the PRS SE Hollowbody II comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: PRS SE Hollowbody II.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton Nashville-Steel compares to the PRS SE Hollowbody II.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Harley Benton Nashville-Steel is built in China while the PRS SE Hollowbody II is made in Indonesia.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: PRS SE Hollowbody II
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Harley Benton Nashville-Steel has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
On the other hand, the PRS SE Hollowbody II comes with a PRS Propietary nut. It's similar to TUSQ nuts, but they're not as hard, and the tone is not as bright. However, the material is self-lubricating, and it's usually well cut, so they have good tuning stability.
Winner: PRS SE Hollowbody II.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Harley Benton Nashville-Steel's are Dlx Machine Heads while the PRS SE Hollowbody II's are PRS Designed Tuners
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Harley Benton Nashville-Steel
- Expensive Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No High-Quality Nut
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
PRS SE Hollowbody II
- Expensive Wood
- PRS Propietary Nut
- Top Brand Pickups
- Coil Split Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Harley Benton Nashville-Steel has the wider nut with 43mm (1.693'') vs 42.9mm (1.688''). This is a 0.1mm (0.0050000000000001'') difference
This means that it will be more difficult to do bar chords on the Harley Benton Nashville-Steel, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Harley Benton Nashville-Steel has the longest scale: 25.5". The PRS SE Hollowbody II is only 25" long. This is a 0.5'' (12.7mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Harley Benton Nashville-Steel has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The PRS SE Hollowbody II, on the other hand, has a Vintage neck. This means that it's thicker than most modern necks, and makes it a better fit for playing chords and slow solos. Some people prefer this type of neck because it gives them a better grip thanks to the extra mass. Still, the vast majority prefer a thinner, faster, and more ''modern'' neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the PRS SE Hollowbody II's fingerboard radius is smaller, which means it's more curved than the Harley Benton Nashville-Steel's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Harley Benton Nashville-Steel.
Fret Size
The PRS SE Hollowbody II has Medium Jumbo frets, which should be taller than the Harley Benton Nashville-Steel's Medium frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
