Show Full Spec Comparison
| Harley Benton CL CLJ-412E NT | Epiphone J-200 EC Studio | |
|---|---|---|
| General | ||
| Brand: | Harley Benton | Epiphone |
| Year: | 2020 | 2013 |
| Strings: | 12 | 6 |
| Made in: | China | China |
| Series: | Custom Line | Modern Acoustic |
| Colors: | Natural | Natural |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Hollowbody | Hollowbody |
| Body Material: | Spruce | Solid Spruce |
| Sides Material: | Mahogany | Maple |
| Back Material: | Mahogany | Maple |
| Bridge: | Ovangkol | Pau Ferro; Classic Moustache shape |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Gold-plated DLX die-cast machine heads | Grover Rotomatic; 18:1 ratio |
| Fretboard: | Ovangkol | Pau Ferro |
| Neck Material: | Mahogany | Mahogany |
| Decoration: | Pearloid Square | Pearloid Crown inlays |
| Scale Size: | 25" | 25.5" |
| Shape: | Acoustic C Shape | Acoustic 1960's SlimTaper D-shape |
| Frets: | 20 Medium Nickel Silver | 20 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 15.748" | 12" |
| Nut: | Bone | Plastic |
| Nut Width: | 48mm (1.89'') | 42.7mm (1.68'') |
| Electronics | ||
| Pickups: | Fishman Presys-II system with built-in tuner (Preamp / Active) | Fishman Sonicore (Preamp / Active) |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Gold | Gold |
Reasons to Get
Harley Benton CL CLJ-412E NT over Epiphone J-200 EC Studio
Reasons to Get
Epiphone J-200 EC Studio over Harley Benton CL CLJ-412E NT
Other Key Differences
Harley Benton CL CLJ-412E NT vs Epiphone J-200 EC Studio
Shared Features
Harley Benton CL CLJ-412E NT vs Epiphone J-200 EC Studio
Common Strengths
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Solid Side Wood
- Solid Back Wood
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Harley Benton CL CLJ-412E NT favors large hands more than the Epiphone J-200 EC Studio.
Harley Benton CL CLJ-412E NT:
Epiphone J-200 EC Studio:
Beginner Friendliness
The Epiphone J-200 EC Studio meets 4 out of our 8 criteria items for beginner friendliness, while the Harley Benton CL CLJ-412E NT meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Harley Benton CL CLJ-412E NT- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
New Player Friendliness
Epiphone J-200 EC Studio- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Short scale
- Soft Strings
- Locking tuners
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Woods Used in the Harley Benton CL CLJ-412E NT
Ovangkol is a beautiful wood that's popular for acoustic guitars. Its tone sits somewhere between rosewood and mahogany, meaning it has a punchy low-end and nice mid-range. Find out more about Ovangkol.
Woods Used in the Epiphone J-200 EC Studio
Pau Ferro has a dark, chocolate-like color with straight dark grains that is being used as a replacement to Rosewood due to the regulations. It produces a warm tone that is somewhere between Mahogany and Rosewood. Find out more about Pau Ferro.
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Winner: Tie.
Electronics
Both come with electronics that allow you connect them to an amplifier or interface for recording.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton CL CLJ-412E NT compares to the Epiphone J-200 EC Studio.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Harley Benton CL CLJ-412E NT has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
On the other hand, the Epiphone J-200 EC Studio comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
Winner: Harley Benton CL CLJ-412E NT.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Harley Benton CL CLJ-412E NT's are Gold-plated DLX die-cast machine heads while the Epiphone J-200 EC Studio's are Grover Rotomatic; 18:1 ratio
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Harley Benton CL CLJ-412E NT
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Electronics
- Bone Saddle
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- Laminated Top Wood
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Epiphone J-200 EC Studio
- Expensive Wood
- Top Brand Pickups
- Electronics
- Solid Top Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No High-Quality Nut
- Low-Quality Material Saddle
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Harley Benton CL CLJ-412E NT has the wider nut with 48mm (1.89'') vs 42.7mm (1.68''). This is a 5.3mm (0.21'') difference
This means that it will be more difficult to do bar chords on the Harley Benton CL CLJ-412E NT, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Epiphone J-200 EC Studio has the longest scale: 25.5". The Harley Benton CL CLJ-412E NT is only 25" long. This is a 0.5'' (12.7mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Harley Benton CL CLJ-412E NT has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Epiphone J-200 EC Studio, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Epiphone J-200 EC Studio's fingerboard radius is smaller, which means it's more curved than the Harley Benton CL CLJ-412E NT's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Harley Benton CL CLJ-412E NT.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Fret Size
The Epiphone J-200 EC Studio has Medium Jumbo frets, which should be taller than the Harley Benton CL CLJ-412E NT's Medium frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
