Show Full Spec Comparison
| Harley Benton Agufish Custom Signature | Gibson 70s Explorer | |
|---|---|---|
| General | ||
| Brand: | Harley Benton | Gibson |
| Year: | 2024 | 2019 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | Indonesia | United States |
| Series: | Signature | Original Collection |
| Colors: | Purple | White |
| Left-Handed Version: | No | Yes |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Okoume | Mahogany |
| Bridge: | Wsc Tune-O-Matic | Aluminum Nashville Tune-O-Matic |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Jinho HB JN-03L locking machine heads | Regular Tuners |
| Fretboard: | Macassar | Rosewood |
| Neck Material: | Roasted Maple | Mahogany |
| Decoration: | None | Acrylic Dots |
| Scale Size: | 25" | 24.75" |
| Shape: | Smooth U | Slim Taper |
| Frets: | 22 XL Jumbo Stainless Steel | 22 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 12" | 12" |
| Nut: | Ivory Tusq | Ivory Tusq |
| Nut Width: | 43mm (1.693'') | 43mm (1.693'') |
| Electronics | ||
| Bridge Pickups: | Roswell "Seraphim" (Humbucker / Passive) | Gibson 70s Tribute (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Alnico Ceramic Flanker (Humbucker / Passive) | Gibson 70s Tribute (Humbucker / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Speed | Speed |
| Pickup Mods: | Coil Split | None |
| Volume Controls: | 2 | 2 |
| Tone Controls: | 2 | 1 |
| Hardware | ||
| Strap Lock: | Yes | No |
| Hardware Color: | Chrome | Chrome |
Show Diagrams Comparison
Reasons to Get
Harley Benton Agufish Custom Signature over Gibson 70s Explorer
Reasons to Get
Gibson 70s Explorer over Harley Benton Agufish Custom Signature
Other Key Differences
Harley Benton Agufish Custom Signature vs Gibson 70s Explorer
Shared Features
Harley Benton Agufish Custom Signature vs Gibson 70s Explorer
Common Strengths
- High-Quality Nut
- Top Pickup Brand
Common Weaknesses
- Neck-Through Build
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Harley Benton Agufish Custom Signature favors large hands more than the Gibson 70s Explorer.
Harley Benton Agufish Custom Signature:
Gibson 70s Explorer:
Beginner Friendliness
The Harley Benton Agufish Custom Signature meets 5 out of our 8 criteria items for beginner friendliness, while the Gibson 70s Explorer meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Harley Benton Agufish Custom Signature- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
New Player Friendliness
Gibson 70s Explorer- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Harley Benton Agufish Custom Signature
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
It's prized in guitar building for its striking visual appeal and tonal properties. This exotic hardwood, native to Southeast Asia, displays a distinctive striped pattern with deep, contrasting bands of dark brown to black against lighter brown or golden hues. Known for its density and durability, Macassar Ebony is commonly used for fretboards, back and sides of acoustic guitars, and high-end electric guitar tops. Its density contributes to a brighter, more articulate tone with a quick response and clear note separation. The wood’s natural oils also give it a smooth, glass-like feel, making it a preferred choice for fretboards where a sleek, effortless playing experience is desired. Over time, Macassar Ebony ages gracefully, becoming smoother and richer in appearance, adding both aesthetic and tonal depth to the instrument.
Okoume is an affordable wood and one of the first to replace Mahogany when the prohibitions started. It's generally softer than Mahogany and the tone has warmer lows.
Woods Used in the Gibson 70s Explorer
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Winner: Gibson 70s Explorer.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Harley Benton Agufish Custom Signature comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Harley Benton Agufish Custom Signature.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Harley Benton Agufish Custom Signature compares to the Gibson 70s Explorer.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Harley Benton Agufish Custom Signature is built in Indonesia while the Gibson 70s Explorer is made in United States.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Gibson 70s Explorer
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Ivory Tusq nuts. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Harley Benton Agufish Custom Signature is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Harley Benton Agufish Custom Signature.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Harley Benton Agufish Custom Signature has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Harley Benton Agufish Custom Signature.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Harley Benton Agufish Custom Signature
- Stainless Steel Frets
- Locking Tuners
- Ivory Tusq Nut
- Top Brand Pickups
- Coil Split Pickups
- Weight Relief
- Luminescent Inlay
- Strap Lock
- Made in Indonesia
- No Expensive Woods
- No Neck-Through Build
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Gibson 70s Explorer
- Made in United States
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Harley Benton Agufish Custom Signature has the longest scale: 25". The Gibson 70s Explorer is only 24.75" long. This is a 0.25'' (6.4mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Harley Benton Agufish Custom Signature has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.
The Gibson 70s Explorer, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Harley Benton Agufish Custom Signature and the Gibson 70s Explorer have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.
Fret Size
The Harley Benton Agufish Custom Signature has XL Jumbo frets, which should be taller than the Gibson 70s Explorer's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
