Swap
Swap
Guild F-55E in Natural
Takamine EF360SC TT
VS
Playability
77
Sound
88
Build
94
Value
71
Score
86
FIND IT ON:
Sweetwater logoMusician's Friend logo
Playability
77
Sound
86
Build
87
Value
73
Score
83
FIND IT ON:
Amazon logoSweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Guild F-55E in Natural vs Takamine EF360SC TT Specs Comparison
Guild F-55E in Natural Takamine EF360SC TT
General
Brand: Guild Takamine
Year: 2021 2018
Strings: 6 6
Made in: United States Japan
Series: Guild Usa TT
Colors: Natural, Burst Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Sitka Spruce Solid Thermal Spruce
Sides Material: Rosewood Rosewood
Back Material: Rosewood Rosewood
Bridge: Ebony Fixed
Neck
Neck Joint: Set Set
Tuners: Gotoh SE700 Open-Gear in Gold Takamine
Fretboard: Ebony Rosewood
Neck Material: Mahogany with Walnut Center Strip Mahogany
Decoration: V-Blocks - Mother-Of-Pearl and Abalone Dots
Scale Size: 25.625" 25.4"
Shape: Acoustic C Shape Acoustic Asymmetrical C
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.945'' (24mm) 1st Fret: - 12th Fret:
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 12" 12"
Nut: Bone Bone
Nut Width: 42.8mm (1.687'') 42.5mm (1.673'')
Electronics
Pickups: LR Baggs Anthem with Volume, Mix, and Phase Controls (Preamp / Active) CT4B II (Preamp / Active)
Hardware
Strap Lock: No No
Hardware Color: Gold Chrome

Reasons to Get
Guild F-55E in Natural over Takamine EF360SC TT

Release Year
2021 vs 2018
From a more recent year
Neck Profile
Acoustic C Shape vs Acoustic Asymmetrical C
Comfortable neck that works for most people
Sides Wood
Solid vs Laminated
Helps with richer tones and louder volume
Nut Width
1.687'' (42.8mm) vs 1.673'' (42.5mm)
Less likely to mute strings by accident and more space for fingerstyle
Body Shape
Jumbo vs Dreadnought
Large body with a tight waist for more top-end
Scale Length
25.625'' (650.9mm) vs 25.4'' (645.2mm)
Lower action and brighter natural tone

Reasons to Get
Takamine EF360SC TT over Guild F-55E in Natural

Neck Profile
Acoustic Asymmetrical C vs Acoustic C Shape
Adapts to the natural shape of your hand
Nut Width
1.673'' (42.5mm) vs 1.687'' (42.8mm)
Favors small hands, easier bar chords and other shapes
Body Shape
Dreadnought vs Jumbo
Prominent low-end tones in a large body
Scale Length
25.4'' (645.2mm) vs 25.625'' (650.9mm)
Easier bending, shorter fret separation and warmer natural tone
Value Score
73 vs 71
Better price/quality relationship

Other Key Differences
Guild F-55E in Natural vs Takamine EF360SC TT

Bridge Material
Ebony vs Fixed
Different Bridge Material
Fretboard Wood
Ebony vs Rosewood
Different Fretboard Wood

Shared Features
Guild F-55E in Natural vs Takamine EF360SC TT

Back Material
Rosewood
Same Back Material
Sides Material
Rosewood
Same Sides Material
Saddle Material
Bone
Same Saddle Material
Body Wood
Spruce
Same Body Wood
Neck Wood
Mahogany
Same Neck Wood
Headstock
3-3
Same Headstock
Nut Material
Bone
Same Nut Material
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Fretboard Radius
12'' (304.8mm)
Same fretboard comfortability
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • Solid Back Wood
  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

SET PRICE ALERT

Takamine EF360SC TT Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Hand Size Comfortability

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .

Guild F-55E in Natural:
Big Hands
Small Hands
Takamine EF360SC TT:
Big Hands
Small Hands

Beginner Friendliness

The Guild F-55E in Natural meets 5 out of our 8 criteria items for beginner friendliness, while the Takamine EF360SC TT meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Guild F-55E in Natural
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Soft Strings
  • Comfortable shape
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Takamine EF360SC TT
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Short scale
  • Soft Strings
  • Locking tuners

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany
Spruce wood pattern used for guitar building
Spruce
Rosewood wood pattern used for guitar building
Rosewood

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Guild F-55E in Natural

Ebony wood pattern used for guitar building
Ebony

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Winner: Guild F-55E in Natural.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Guild F-55E in Natural
Sustain 95
Versatility 85
Tuning Stability 70
Sound 88
Takamine EF360SC TT
Sustain 90
Versatility 85
Tuning Stability 70
Sound 86

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Guild F-55E in Natural compares to the Takamine EF360SC TT.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Guild F-55E in Natural is built in United States while the Takamine EF360SC TT is made in Japan.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Bone nuts. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Guild F-55E in Natural's are Gotoh SE700 Open-Gear in Gold while the Takamine EF360SC TT's are Takamine

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Guild F-55E in Natural
  • Made in United States
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Electronics
  • Bone Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Takamine EF360SC TT
  • Made in Japan
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Electronics
  • Bone Saddle
  • Solid Top Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Laminated Side Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Guild F-55E in Natural
Quality of materials 96
Features 85
Quality Control 100
Build Quality 94
Takamine EF360SC TT
Quality of materials 81
Features 85
Quality Control 95
Build Quality 87

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Guild F-55E in Natural Nut Width
Guild F-55E in Natural Nut Width
Takamine EF360SC TT Nut Width
Takamine EF360SC TT Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Guild F-55E in Natural has the wider nut with 42.8mm (1.687'') vs 42.5mm (1.673''). This is a 0.3mm (0.014'') difference

This means that it will be more difficult to do bar chords on the Guild F-55E in Natural, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Guild F-55E in Natural's Scale Length
Guild F-55E in Natural's Scale Length
Takamine EF360SC TT's Scale Length
Takamine EF360SC TT's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Guild F-55E in Natural has the longest scale: 25.625". The Takamine EF360SC TT is only 25.4" long. This is a 0.225'' (5.7mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Guild F-55E in Natural Neck Profile
Guild F-55E in Natural's neck profile
Takamine EF360SC TT Neck Profile
Takamine EF360SC TT's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Guild F-55E in Natural has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

The Takamine EF360SC TT, on the other hand, has a Asymmetrical neck. Even though this neck shape looks like a poorly-made job, it's, in fact, the neck that most naturally adapts to the arc of your hand when grabbing a guitar neck. You'll notice that the lower part of your palm makes a more pronounced, deeper curve while the upper part makes a more subtle arch. This is the shape that adapts the best to that natural arch your hand makes while playing.

Fretboard Radius

Guild F-55E in Natural Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Guild F-55E in Natural and the Takamine EF360SC TT have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.

Fret Size

Guild F-55E in Natural and Takamine EF360SC TT Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Guild F-55E in Natural
Bending & Vibrato Ease 75
Chord Playability 75
Solo Playability 80
Playability 77
Takamine EF360SC TT
Bending & Vibrato Ease 75
Chord Playability 85
Solo Playability 70
Playability 77