Swap
Swap
Gibson J-45 Standard 12-String
Taylor 614ce
VS
Playability
78
Sound
88
Build
94
Value
72
Score
87
FIND IT ON:
Musician's Friend logoSweetwater logo
Playability
73
Sound
88
Build
87
Value
68
Score
83
FIND IT ON:
Amazon logoSweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Gibson J-45 Standard 12-String vs Taylor 614ce Specs Comparison
Gibson J-45 Standard 12-String Taylor 614ce
General
Brand: Gibson Taylor
Year: 2021 2014
Strings: 12 6
Made in: United States United States
Series: Modern Acoustic 600
Colors: Sunburst Natural
Left-Handed Version: No Yes
Body
Type: Hollowbody Hollowbody
Body Material: Solid Sitka Spruce Solid Sitka Spruce
Sides Material: Mahogany Maple
Back Material: Mahogany Maple
Bridge: Reverse Belly, Rosewood West African Crelicam Ebony
Neck
Neck Joint: Set Set
Tuners: Grover Mini Rotomatic Taylor Nickel
Fretboard: Indian Rosewood West African Crelicam Ebony
Neck Material: Mahogany Hard Rock Maple
Decoration: Mother of Pearl Dots Grained Ivoroid Wings
Scale Size: 24.75" 25.5"
Shape: Acoustic Slim Taper Acoustic Taylor Standard
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 12" 15"
Nut: Bone Black Tusq XL
Nut Width: 47.6mm (1.875'') 44.5mm (1.75'')
Electronics
Pickups: LR Baggs VTC (Preamp / Active) Expression System 2 Electronics (Preamp / Active)
Hardware
Strap Lock: No No
Hardware Color: Nickel Nickel

Reasons to Get
Gibson J-45 Standard 12-String over Taylor 614ce

Release Year
2021 vs 2014
From a more recent year
Pickups Brand
LR Baggs vs None
Pickups from a renown brand
Strings
12 vs 6
Allows you to play lower notes
Nut Width
1.875'' (47.6mm) vs 1.75'' (44.5mm)
Less likely to mute strings by accident and more space for fingerstyle
Body Shape
Jumbo vs Grand Auditorium
Large body with a tight waist for more top-end
Paint Finish
Nitro vs Poly
Thin finish that creates aging marks faster
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
12'' (304.8mm) vs 15'' (381mm)
Easier to play chords without muting strings
Value Score
72 vs 68
Better price/quality relationship

Reasons to Get
Taylor 614ce over Gibson J-45 Standard 12-String

Strings
6 vs 12
Narrower neck and fewer strings to change
Nut Width
1.75'' (44.5mm) vs 1.875'' (47.6mm)
Favors small hands, easier bar chords and other shapes
Body Shape
Grand Auditorium vs Jumbo
Wide and narrow body with a balanced tone
Paint Finish
Poly vs Nitro
Resistant paint that ages well
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone
Fretboard Radius
15'' (381mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend

Other Key Differences
Gibson J-45 Standard 12-String vs Taylor 614ce

Back Material
Mahogany vs Maple
Different Back Material
Sides Material
Mahogany vs Maple
Different Sides Material
Saddle Material
Ivory Tusq vs Synthetic Bone
Different Saddle Material
Bridge Material
Reverse Belly, Rosewood vs West African Crelicam Ebony
Different Bridge Material
Neck Wood
Mahogany vs Maple
Different Neck Wood
Fretboard Wood
Rosewood vs Ebony
Different Fretboard Wood
Headstock
6-6 vs 3-3
Different Headstock
Nut Material
Bone vs Black Tusq XL
Different Nut Material

Shared Features
Gibson J-45 Standard 12-String vs Taylor 614ce

Body Wood
Spruce
Same Body Wood
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Gibson J-45 Standard 12-String Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Hand Size Comfortability

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .

Gibson J-45 Standard 12-String:
Big Hands
Small Hands
Taylor 614ce:
Big Hands
Small Hands

Beginner Friendliness

Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Gibson J-45 Standard 12-String
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Taylor 614ce
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Spruce wood pattern used for guitar building
Spruce

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Woods Used in the Gibson J-45 Standard 12-String

Mahogany wood pattern used for guitar building
Mahogany
Rosewood wood pattern used for guitar building
Rosewood

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Taylor 614ce

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Winner: Gibson J-45 Standard 12-String.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Gibson J-45 Standard 12-String
Sustain 95
Versatility 85
Tuning Stability 70
Sound 88
Taylor 614ce
Sustain 95
Versatility 85
Tuning Stability 70
Sound 88

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Gibson J-45 Standard 12-String compares to the Taylor 614ce.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Gibson J-45 Standard 12-String has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Taylor 614ce comes with a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Gibson J-45 Standard 12-String's are Grover Mini Rotomatic while the Taylor 614ce's are Taylor Nickel

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Gibson J-45 Standard 12-String
  • Made in United States
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Electronics
  • Ivory Tusq Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Taylor 614ce
  • Made in United States
  • Expensive Wood
  • Black Tusq XL Nut
  • Electronics
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Top Brand Pickups
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Gibson J-45 Standard 12-String
Quality of materials 96
Features 85
Quality Control 100
Build Quality 94
Taylor 614ce
Quality of materials 86
Features 75
Quality Control 100
Build Quality 87

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Gibson J-45 Standard 12-String Nut Width
Gibson J-45 Standard 12-String Nut Width
Taylor 614ce Nut Width
Taylor 614ce Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Gibson J-45 Standard 12-String has the wider nut with 47.6mm (1.875'') vs 44.5mm (1.75''). This is a 3.1mm (0.125'') difference

This means that it will be more difficult to do bar chords on the Gibson J-45 Standard 12-String, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Gibson J-45 Standard 12-String's Scale Length
Gibson J-45 Standard 12-String's Scale Length
Taylor 614ce's Scale Length
Taylor 614ce's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Taylor 614ce has the longest scale: 25.5". The Gibson J-45 Standard 12-String is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Gibson J-45 Standard 12-String Neck Profile
Gibson J-45 Standard 12-String's neck profile
Taylor 614ce Neck Profile
Taylor 614ce's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Gibson J-45 Standard 12-String and the Taylor 614ce have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Gibson J-45 Standard 12-String Fingerboard Radius
Gibson J-45 Standard 12-String's Fingerboard radius
Taylor 614ce Fingerboard Radius
Taylor 614ce's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Gibson J-45 Standard 12-String's fingerboard radius is smaller, which means it's more curved than the Taylor 614ce's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Taylor 614ce.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Fret Size

Gibson J-45 Standard 12-String and Taylor 614ce Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Gibson J-45 Standard 12-String
Bending & Vibrato Ease 85
Chord Playability 70
Solo Playability 80
Playability 78
Taylor 614ce
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73