Swap
Swap
Gibson Flying V
Jackson USA Select Randy Rhoads RR1
VS
Playability
73
Sound
72
Build
69
Value
66
Score
71
FIND IT ON:
Sweetwater logo
Playability
73
Sound
79
Build
74
Value
60
Score
75
FIND IT ON:
Sweetwater logoMusician's Friend logo
Add more to comparison

Gibson Flying V vs Jackson USA Select Randy Rhoads RR1

Reasons to Get
Gibson Flying V over Jackson USA Select Randy Rhoads RR1

Type of Frets
Medium Jumbo vs Jumbo
You'll feel the fretboard when pressing down the strings
Neck Profile
Slim Taper vs Speed
Comfortable neck that works for most people
Neck Thickness at 1st Fret
0.82'' (20.8mm) vs 0.775'' (19.7mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.92'' (23.4mm) vs 0.835'' (21.2mm)
More comfortable at higher frets for big hands
Nut Width
1.693'' (43mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Value Score
66 vs 60
Better price/quality relationship

Reasons to Get
Jackson USA Select Randy Rhoads RR1 over Gibson Flying V

Release Year
2020 vs 2019
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Compound Radius
12" to 16" vs 12"
Balanced playability for chords and single-notes
Neck Profile
Speed vs Slim Taper
Thin and flat neck for playing fast
Neck Joint
Neck-Through vs Set
Stronger neck and easier access to upper frets
Neck Thickness at 1st Fret
0.775'' (19.7mm) vs 0.82'' (20.8mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.835'' (21.2mm) vs 0.92'' (23.4mm)
More comfortable at higher frets for small hands
Nut Width
1.688'' (42.9mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone

Other Key Differences
Gibson Flying V vs Jackson USA Select Randy Rhoads RR1

Bridge Pickup
Gibson BurstBucker 3 vs Seymour Duncan JB TB-4
Different Bridge Pickup
Neck Pickup
Gibson Burstbucker 2 vs Seymour Duncan Jazz SH-2
Different Neck Pickup
Body Wood
Mahogany vs Alder
Different Body Wood
Neck Wood
Mahogany vs Maple
Different Neck Wood
Fretboard Wood
Rosewood vs Ebony
Different Fretboard Wood
Headstock
3-3 vs 6
Different Headstock
Nut Material
Ivory Tusq vs Locking
Different Nut Material

Shared Features
Gibson Flying V vs Jackson USA Select Randy Rhoads RR1

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
2
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
22
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed

Common Strengths

  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Jackson USA Select Randy Rhoads RR1 is probably the better product overall with its final score of 75 compared to the Gibson Flying V's 71 score, although not by a lot.

The Jackson USA Select Randy Rhoads RR1 wins when it comes to sound, build quality. On the other hand, the Gibson Flying V has the upper hand when it comes to value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Gibson Flying V
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

New Player Friendliness

Jackson USA Select Randy Rhoads RR1
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Narrow nut
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Gibson Flying V Overview

  • From Gibson's 2019 Original Collection series
  • Made in United States
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Mahogany body
  • Mahogany neck
  • Rosewood fretboard
  • Bridge pickup: Gibson BurstBucker 3 (Humbucker/Passive)
  • Neck pickup: Gibson Burstbucker 2 (Humbucker/Passive)
  • 2 volume and 1 tone Bell knobs
  • 3-way Switch
  • Aluminum Nashville Tune-O-Matic bridge
  • Slim Taper Set neck
  • 22 Medium Jumbo frets
  • Grover Rotomatics w/ Kidney Buttons tuners
  • Weight between 7lbs (3.2kgs) and 7.8lbs (3.5kgs)
  • Compare Specs >

Jackson USA Select Randy Rhoads RR1 Overview

  • From Jackson's 2020 USA Select series
  • Made in United States
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Alder body
  • Quartersawn Maple neck
  • Ebony fretboard
  • Bridge pickup: Seymour Duncan JB TB-4 (Humbucker/Passive)
  • Neck pickup: Seymour Duncan Jazz SH-2 (Humbucker/Passive)
  • 2 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose Original Double-Locking Tremolo bridge
  • Speed Neck-Through neck
  • 22 Jumbo frets
  • Jackson Sealed Die-Cast tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Gibson Flying V

Mahogany wood pattern used for guitar building
Mahogany
Rosewood wood pattern used for guitar building
Rosewood

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Jackson USA Select Randy Rhoads RR1

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony
Alder wood pattern used for guitar building
Alder

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Gibson Flying V.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

We found the same or similar pickups to the Jackson USA Select Randy Rhoads RR1's online:

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

They both share the following switching options:

Gibson Flying V and Jackson USA Select Randy Rhoads RR1 pickups switch and push knobs diagram
Gibson Flying V and Jackson USA Select Randy Rhoads RR1's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Jackson USA Select Randy Rhoads RR1.

Final Sound Quality Scores

Gibson Flying V
Pickups 90
Sustain 75
Versatility 51
Tuning Stability 70
Sound 72
Jackson USA Select Randy Rhoads RR1
Pickups 90
Sustain 80
Versatility 61
Tuning Stability 85
Sound 79

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Gibson Flying V compares to the Jackson USA Select Randy Rhoads RR1.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Gibson Flying V has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

On the other hand, the Jackson USA Select Randy Rhoads RR1 comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Gibson Flying V's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Jackson USA Select Randy Rhoads RR1's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Jackson USA Select Randy Rhoads RR1.

Tuners

Both come with regular tuners. The Gibson Flying V's are Grover Rotomatics w/ Kidney Buttons while the Jackson USA Select Randy Rhoads RR1's are Jackson Sealed Die-Cast

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Gibson Flying V has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

On the other hand, the Jackson USA Select Randy Rhoads RR1 comes with Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

Winner: Jackson USA Select Randy Rhoads RR1.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Gibson Flying V
  • Made in United States
  • Expensive Wood
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Jackson USA Select Randy Rhoads RR1
  • Made in United States
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Tremolo
  • Compound Radius Fretboard
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No 21:1 Tuner Ratio
  • No Retainer Bar
  • No Strap Lock

Final Build Quality Scores

Gibson Flying V
Quality of materials 66
Features 50
Quality Control 90
Build Quality 69
Jackson USA Select Randy Rhoads RR1
Quality of materials 41
Features 80
Quality Control 100
Build Quality 74

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Gibson Flying V Nut Width
Gibson Flying V Nut Width
Jackson USA Select Randy Rhoads RR1 Nut Width
Jackson USA Select Randy Rhoads RR1 Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Gibson Flying V has the wider nut with 43mm (1.693'') vs 42.9mm (1.688''). This is a 0.1mm (0.0050000000000001'') difference

This means that it will be more difficult to do bar chords on the Gibson Flying V, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Gibson Flying V's Scale Length
Gibson Flying V's Scale Length
Jackson USA Select Randy Rhoads RR1's Scale Length
Jackson USA Select Randy Rhoads RR1's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Jackson USA Select Randy Rhoads RR1 has the longest scale: 25.5". The Gibson Flying V is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Gibson Flying V Neck Profile
Gibson Flying V's neck profile
Jackson USA Select Randy Rhoads RR1 Neck Profile
Jackson USA Select Randy Rhoads RR1's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Gibson Flying V has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

The Jackson USA Select Randy Rhoads RR1, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

Fretboard Radius

Gibson Flying V Fingerboard Radius
Gibson Flying V's Fingerboard radius
Jackson USA Select Randy Rhoads RR1 Fretboard Compound Radius
Jackson USA Select Randy Rhoads RR1's Compound Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Jackson USA Select Randy Rhoads RR1 is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Gibson Flying V:
Big Hands
Small Hands
Jackson USA Select Randy Rhoads RR1:
Big Hands
Small Hands

Fret Size

Gibson Flying V Frets Size
Gibson Flying V's Frets Size
Jackson USA Select Randy Rhoads RR1 Frets Size
Jackson USA Select Randy Rhoads RR1's Frets Size

The Jackson USA Select Randy Rhoads RR1 has Jumbo frets, which should be taller than the Gibson Flying V's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Gibson Flying V
Bending & Vibrato Ease 85
Chord Playability 65
Solo Playability 70
Playability 73
Jackson USA Select Randy Rhoads RR1
Bending & Vibrato Ease 70
Chord Playability 60
Solo Playability 90
Playability 73

Specs Side-by-Side

Gibson Flying V vs Jackson USA Select Randy Rhoads RR1
General Gibson Flying V Jackson USA Select Randy Rhoads RR1
Brand: Gibson Jackson
Year: 2019 2020
Configuration: HH HH
Strings: 6 6
Made in: United States United States
Series: Original Collection USA Select
Colors: Natural White, Black
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Mahogany Alder
Bridge: Aluminum Nashville Tune-O-Matic Floyd Rose Original Double-Locking Tremolo
Neck
Neck Joint: Set Neck-Through
Tuners: Grover Rotomatics w/ Kidney Buttons Jackson Sealed Die-Cast
Fretboard: Rosewood Ebony
Neck Material: Mahogany Quartersawn Maple
Decoration: Acrylic Dots Mother of Pearl Sharkfin
Scale Size: 24.75" 25.5"
Shape: Slim Taper Speed
Thickness: 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.92'' (23.4mm) 1st Fret: 0.775'' (19.7mm) - 12th Fret: 0.835'' (21.2mm)
Frets: 22 Medium Jumbo Nickel Silver 22 Jumbo Nickel Silver
Fretboard Radius: 12" 12" to 16"
Nut: Ivory Tusq Locking
Nut Width: 43mm (1.693'') 42.9mm (1.688'')
Electronics
Bridge Pickup: Gibson BurstBucker 3 (Humbucker / Passive) Seymour Duncan JB TB-4 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Gibson Burstbucker 2 (Humbucker / Passive) Seymour Duncan Jazz SH-2 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Bell Dome
Pickup Mods: None None
Volume Controls: 2 2
Tone Controls: 1 1