Show Full Spec Comparison
| Gibson Firebird | Fender American Professional II Stratocaster HSS | |
|---|---|---|
| General | ||
| Brand: | Gibson | Fender |
| Year: | 2019 | 2020 |
| Configuration: | HH | HSS |
| Strings: | 6 | 6 |
| Made in: | United States | United States |
| Series: | Original Collection | American Professional II |
| Colors: | Red, Brown Burst Burst | White, Sunburst, Blue, Green, Brown, Gray Burst |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Mahogany | Roasted Pine |
| Bridge: | Aluminum Nashville Tune-O-Matic | 2-Point Synchronized Tremolo with Bent Steel Saddles, Pop-In Tremolo Arm and Cold-Rolled Steel Block |
| Neck | ||
| Neck Joint: | Neck-Through | Bolt-On |
| Tuners: | Grover Mini Rotomatics | Fender® Standard Cast/Sealed Staggered |
| Fretboard: | Rosewood | Maple |
| Neck Material: | 9-ply Mahogany/Walnut | Maple |
| Decoration: | Acrylic Trapezoid | Black Dot |
| Scale Size: | 24.75" | 25.5" |
| Shape: | Slim Taper | Deep C |
| Thickness: | 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.92'' (23.4mm) | 1st Fret: 0.8'' (20.3mm) - 12th Fret: 0.92'' (23.4mm) |
| Frets: | 22 Medium Jumbo Nickel Silver | 22 Narrow Tall Nickel Silver |
| Fretboard Radius: | 12" | 9.5" |
| Nut: | Ivory Tusq | Bone |
| Nut Width: | 43mm (1.693'') | 42.8mm (1.685'') |
| Electronics | ||
| Bridge Pickups: | Gibson Firebird Alnico V, Lead (Humbucker / Passive) | Fender V-Mod II Double Tap Humbucking (Humbucker / Passive) |
| Middle Pickup: | Fender V-Mod II Single-Coil Strat (Single Coil / Passive) | |
| Neck Pickup: | Gibson Firebird Alnico V, Rhythm (Humbucker / Passive) | Fender V-Mod Single-Coil Strat (Single Coil / Passive) |
| Switch: | 3 Way | 5 Way |
| Knobs: | Bell | Bell |
| Pickup Mods: | None | S-1 Switch |
| Volume Controls: | 2 | 1 |
| Tone Controls: | 2 | 2 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Chrome |
Show Diagrams Comparison
Reasons to Get
Gibson Firebird over Fender American Professional II Stratocaster HSS
Reasons to Get
Fender American Professional II Stratocaster HSS over Gibson Firebird
Other Key Differences
Gibson Firebird vs Fender American Professional II Stratocaster HSS
Shared Features
Gibson Firebird vs Fender American Professional II Stratocaster HSS
Common Strengths
- High-Quality Nut
- From a High-Quality-Standards Country
- Top Pickup Brand
Common Weaknesses
- Weight Relief
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Gibson Firebird:
Fender American Professional II Stratocaster HSS:
Beginner Friendliness
The Fender American Professional II Stratocaster HSS meets 6 out of our 8 criteria items for beginner friendliness, while the Gibson Firebird meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Gibson Firebird- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Fender American Professional II Stratocaster HSS- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Gibson Firebird
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Fender American Professional II Stratocaster HSS
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Some guitarists don't like Pine because they think it's too soft and dents easily. However, there are many types of pines, and the hardest pine is the one used for guitar building. The general opinion is that it tends to give a nice round and balanced sound.
Winner: Gibson Firebird.
Pickup Configuration
The Gibson Firebird has an HH configuration while the Fender American Professional II Stratocaster HSS has HSS pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
We found the same or similar pickups to the Fender American Professional II Stratocaster HSS's online:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender American Professional II Stratocaster HSS gives you 5 switch options while the Gibson Firebird gives you 3. This means that the Fender American Professional II Stratocaster HSS gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the Fender American Professional II Stratocaster HSS comes with some kind of pickup modification: S-1 Switch.
An S-1 switch can do a lot of different pickup combinations. It can split them, connect them in series, parallel, add more pickups to each position, and more. Check out the diagram to know how it affects this model.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender American Professional II Stratocaster HSS.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Gibson Firebird compares to the Fender American Professional II Stratocaster HSS.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Gibson Firebird has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Fender American Professional II Stratocaster HSS comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Gibson Firebird's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Fender American Professional II Stratocaster HSS's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Gibson Firebird's are Grover Mini Rotomatics while the Fender American Professional II Stratocaster HSS's are Fender® Standard Cast/Sealed Staggered
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Gibson Firebird has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the Fender American Professional II Stratocaster HSS comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Gibson Firebird.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Gibson Firebird
- Made in United States
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Neck-Through Build
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender American Professional II Stratocaster HSS
- Made in United States
- Bone Nut
- Top Brand Pickups
- S-1 Switch Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Expensive Woods
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Gibson Firebird has the wider nut with 43mm (1.693'') vs 42.8mm (1.685''). This is a 0.2mm (0.008'') difference
This means that it will be more difficult to do bar chords on the Gibson Firebird, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Fender American Professional II Stratocaster HSS has the longest scale: 25.5". The Gibson Firebird is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Gibson Firebird and the Fender American Professional II Stratocaster HSS have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender American Professional II Stratocaster HSS's fingerboard radius is smaller, which means it's more curved than the Gibson Firebird's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Gibson Firebird.
Fret Size
The Fender American Professional II Stratocaster HSS has Narrow Tall frets, which should be taller than the Gibson Firebird's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
