Swap
Swap
Gibson Custom Theodore
Gibson Custom 1954 Les Paul Goldtop Reissue
VS
Playability
77
Sound
75
Build
72
Value
60
Score
75
FIND IT ON:
Sweetwater logo
Playability
77
Sound
75
Build
72
Value
60
Score
75
FIND IT ON:
Sweetwater logoMusician's Friend logo
Add more to comparison

Gibson Custom Theodore vs 1954 Les Paul Goldtop Reissue

Reasons to Get
Gibson Custom Theodore over 1954 Les Paul Goldtop Reissue

Reasons to Get
Gibson Custom 1954 Les Paul Goldtop Reissue over Theodore

Other Key Differences
Gibson Custom Theodore vs 1954 Les Paul Goldtop Reissue

Body Wood
Alder vs Mahogany
Different Body Wood
Headstock
6 vs 3-3
Different Headstock

Shared Features
Gibson Custom Theodore vs 1954 Les Paul Goldtop Reissue

Bridge Pickup
Custom Soapbar P90
Same Bridge Pickup
Neck Pickup
Custom Soapbar P90
Same Neck Pickup
Neck Wood
Mahogany
Same Neck Wood
Fretboard Wood
Rosewood
Same Fretboard Wood
Nut Material
Nylon
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
2
Same volume control
Tone Knobs
2
Same tone control
Pickups
P90P90
Vintage tone with decent versatility
Number of Frets
22
Same maximum octave
Nut Width
1.688'' (42.9mm)
Same string separation at the nut
Paint Finish
Nitro
Thin finish that creates aging marks faster
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm)
Same string tension and fret separation
Fretboard Radius
12'' (304.8mm)
Same fretboard comfortability
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Set
Neck is glued to the body
Type of Frets
Narrow Tall
You won't feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Weight Relief
  • Locking Tuners
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Gibson Custom Theodore Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 75 out of 100, which makes them similar in terms of quality.

The Gibson Custom 1954 Les Paul Goldtop Reissue wins when it comes to. On the other hand, the Gibson Custom Theodore has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 4 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Gibson Custom Theodore
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

New Player Friendliness

Gibson Custom 1954 Les Paul Goldtop Reissue
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Gibson Custom Theodore Overview

  • From Gibson Custom's 2022 Historic Collection series
  • Made in United States
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • Alder body
  • Mahogany neck
  • Indian Rosewood fretboard
  • Bridge pickup: Custom Soapbar P90 (Single Coil/Passive)
  • 2 volume and 2 tone Bell knobs
  • 3-way Switch
  • Wraparound bridge
  • C-profile Set neck
  • 22 Narrow Tall frets
  • Kluson Six In-Line with Cream Buttons tuners
  • Compare Specs >

Gibson Custom 1954 Les Paul Goldtop Reissue Overview

  • From Gibson Custom's 2022 Historic Collection series
  • Made in United States
  • 6 strings
  • 24.75"'' scale
  • 12" Fretboard Radius
  • 1-Piece Lightweight Mahogany body
  • Mahogany neck
  • Indian Rosewood fretboard
  • Bridge pickup: Custom Soapbar P90 (Single Coil/Passive)
  • 2 volume and 2 tone Speed knobs
  • 3-way Switch
  • Wraparound bridge
  • 50s Rounded Medium C Set neck
  • 22 Narrow Tall frets
  • Kluson Single Line, Single Ring tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany
Rosewood wood pattern used for guitar building
Rosewood

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Gibson Custom Theodore

Alder wood pattern used for guitar building
Alder

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Tie.

Pickup Configuration

Both pickup configurations are P90P90. P90P90 gives you two P90s for a crunchy vintage tone. The tone sits somewhere in the middle between typical single-coils and humbuckers. They also produce less hum than single-coils, but they don't cancel it completely like humbuckers.

Pickups Quality

Both come with some of the top pickups on the market. You can't go wrong with either of them. You'll probably never need a pickup upgrade.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

They both share the following switching options:

Gibson Custom Theodore and Gibson Custom 1954 Les Paul Goldtop Reissue pickups switch and push knobs diagram
Gibson Custom Theodore and Gibson Custom 1954 Les Paul Goldtop Reissue's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Tie.

Final Sound Quality Scores

Gibson Custom Theodore
Pickups 100
Sustain 75
Versatility 53
Tuning Stability 70
Sound 75
Gibson Custom 1954 Les Paul Goldtop Reissue
Pickups 100
Sustain 75
Versatility 53
Tuning Stability 70
Sound 75

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Gibson Custom Theodore compares to the Gibson Custom 1954 Les Paul Goldtop Reissue.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Nylon nuts. It used to be one of the highest quality materials for nuts (and still is), but it's rare to find nowadays because it's hard to work with. It's a very resistant material with very low friction, so it will keep the guitar in tune and will last for a long time

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. The Gibson Custom Theodore's are Kluson Six In-Line with Cream Buttons while the Gibson Custom 1954 Les Paul Goldtop Reissue's are Kluson Single Line, Single Ring

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Gibson Custom Theodore
  • Made in United States
  • Expensive Wood
  • Nylon Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Gibson Custom 1954 Les Paul Goldtop Reissue
  • Made in United States
  • Expensive Wood
  • Nylon Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Gibson Custom Theodore
Quality of materials 66
Features 50
Quality Control 100
Build Quality 72
Gibson Custom 1954 Les Paul Goldtop Reissue
Quality of materials 66
Features 50
Quality Control 100
Build Quality 72

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Gibson Custom Theodore Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42.9mm (1.688'').

This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

Scale Length

Gibson Custom Theodore and Gibson Custom 1954 Les Paul Goldtop Reissue's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.75".

This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.

On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Gibson Custom Theodore Neck Profile
Gibson Custom Theodore's neck profile
Gibson Custom 1954 Les Paul Goldtop Reissue Neck Profile
Gibson Custom 1954 Les Paul Goldtop Reissue's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Gibson Custom Theodore and the Gibson Custom 1954 Les Paul Goldtop Reissue have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Gibson Custom Theodore Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Gibson Custom Theodore and the Gibson Custom 1954 Les Paul Goldtop Reissue have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Gibson Custom Theodore:
Big Hands
Small Hands
Gibson Custom 1954 Les Paul Goldtop Reissue:
Big Hands
Small Hands

Fret Size

Gibson Custom Theodore and Gibson Custom 1954 Les Paul Goldtop Reissue Frets Size
Both have a similar Narrow Tall fret size

Both have a Narrow Tall fret size. Their height is very similar to Jumbo frets, but they have a narrower crown. They won't let you feel the fretboard when playing, which will make it easier to get clean notes. However, if you press down too hard you might get the notes out of pitch.

Final Playability Scores

Gibson Custom Theodore
Bending & Vibrato Ease 95
Chord Playability 55
Solo Playability 80
Playability 77
Gibson Custom 1954 Les Paul Goldtop Reissue
Bending & Vibrato Ease 95
Chord Playability 55
Solo Playability 80
Playability 77

Specs Side-by-Side

Gibson Custom Theodore vs 1954 Les Paul Goldtop Reissue
General Gibson Custom Theodore 1954 Les Paul Goldtop Reissue
Brand: Gibson Custom Gibson Custom
Year: 2022 2022
Configuration: P90P90 P90P90
Strings: 6 6
Made in: United States United States
Series: Historic Collection Historic Collection
Colors: Black, Red, Natural Gold
Left-Handed Version: No Yes
Body
Type: Solid Body Solid Body
Body Material: Alder 1-Piece Lightweight Mahogany
Bridge: Wraparound Wraparound
Neck
Neck Joint: Set Set
Tuners: Kluson Six In-Line with Cream Buttons Kluson Single Line, Single Ring
Fretboard: Indian Rosewood Indian Rosewood
Neck Material: Mahogany Mahogany
Decoration: Pearloid Dot Aged Cellulose Nitrate Trapezoid
Scale Size: 24.75" 24.75"
Shape: C-profile 50s Rounded Medium C
Frets: 22 Narrow Tall Nickel Silver 22 Narrow Tall Nickel Silver
Fretboard Radius: 12" 12"
Nut: Nylon Nylon
Nut Width: 42.9mm (1.688'') 42.9mm (1.688'')
Electronics
Bridge Pickup: Custom Soapbar P90 (Single Coil / Passive) Custom Soapbar P90 (Single Coil / Passive)
Middle Pickup:
Neck Pickup: Custom Soapbar P90 (Single Coil / Passive) Custom Soapbar P90 (Single Coil / Passive)
Switch: 3 Way 3 Way
Knobs: Bell Speed
Pickup Mods: None None
Volume Controls: 2 2
Tone Controls: 2 2