Show Full Spec Comparison
| Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom | Cort G300 Pro | |
|---|---|---|
| General | ||
| Brand: | Gibson Custom | Cort |
| Year: | 2022 | 2021 |
| Configuration: | HHH | HH |
| Strings: | 6 | 6 |
| Made in: | United States | Indonesia |
| Series: | Modern Collection | G |
| Colors: | Black | Black, Red |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Mahogany | Basswood |
| Bridge: | Lightweight Aluminum Stop Bar with Long Stud/Anchor | Cort CFA-III Tremolo |
| Neck | ||
| Neck Joint: | Set | Bolt-On |
| Tuners: | Grover Kidney | Cort Staggered Locking |
| Fretboard: | Ebony | Roasted Maple (Luminous side dot inlays) |
| Neck Material: | Mahogany | Roasted Maple |
| Decoration: | Custom Block; Frampton Signature Sandblasted into 12th Fret Inlay | Pearloid Dots |
| Scale Size: | 24.75" | 25.5" |
| Shape: | Peter Frampton | Ergo-V |
| Thickness: | 1st Fret: 0.88'' (22.4mm) - 12th Fret: 1.05'' (26.7mm) | 1st Fret: - 12th Fret: |
| Frets: | 22 Jumbo Nickel Silver | 24 Medium Stainless Steel |
| Fretboard Radius: | 12" | 12" to 15.75" |
| Nut: | Bone | Black Tusq XL |
| Nut Width: | 42.9mm (1.688'') | 42.1mm (1.656'') |
| Electronics | ||
| Bridge Pickups: | Custombucker (Humbucker / Passive) | Seymour Duncan JB TB-4 (Humbucker / Passive) |
| Middle Pickup: | Custombucker (Humbucker / Passive) | |
| Neck Pickup: | Custombucker (Humbucker / Passive) | Seymour Duncan Jazz SH-2 (Humbucker / Passive) |
| Switch: | 3 Way | 5 Way |
| Knobs: | Speed | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 2 | 1 |
| Tone Controls: | 2 | 1 |
| Hardware | ||
| Strap Lock: | Yes | No |
| Hardware Color: | Gold | Chrome |
Show Diagrams Comparison
Reasons to Get
Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom over Cort G300 Pro
Reasons to Get
Cort G300 Pro over Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom
Other Key Differences
Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom vs Cort G300 Pro
Shared Features
Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom vs Cort G300 Pro
Common Strengths
- High-Quality Nut
- High-Quality Frets
- Top Pickup Brand
Common Weaknesses
- Pickup Alter Switch/Knob
- Stays in Tune (Evertune)
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom favors large hands more than the Cort G300 Pro.
Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom:
Cort G300 Pro:
Beginner Friendliness
The Cort G300 Pro meets 7 out of our 8 criteria items for beginner friendliness, while the Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Cort G300 Pro- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the Cort G300 Pro
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.
Winner: Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom.
Pickup Configuration
The Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom has an HHH configuration while the Cort G300 Pro has HH pickups.
A triple Humbucker (HHH) can be intimidating at first, but it's one of the combinations that offer the most tone versatility. You'll be able to have from a lot of output for Hard Rock genres, to warm and clean sounds that are more common in Jazz.
On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
We found the same or similar pickups to the Cort G300 Pro's online:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Cort G300 Pro gives you 5 switch options while the Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom gives you 3. This means that the Cort G300 Pro gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Cort G300 Pro.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom compares to the Cort G300 Pro.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom is built in United States while the Cort G300 Pro is made in Indonesia.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
On the other hand, the Cort G300 Pro comes with a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Cort G300 Pro is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Cort G300 Pro.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Cort G300 Pro's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Cort G300 Pro has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Cort G300 Pro.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the Cort G300 Pro comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Cort G300 Pro.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Weight Relief
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Cort G300 Pro
- Stainless Steel Frets
- Locking Tuners
- Black Tusq XL Nut
- Top Brand Pickups
- Luminescent Inlay
- Tremolo
- Compound Radius Fretboard
- Made in Indonesia
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom has the wider nut with 42.9mm (1.688'') vs 42.1mm (1.656''). This is a 0.8mm (0.032'') difference
This means that it will be more difficult to do bar chords on the Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Cort G300 Pro has the longest scale: 25.5". The Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Cort G300 Pro, on the other hand, has a V neck. This neck shape was more common during Fender's early years. Some people like it because they use their thumb over the edge of the fretboard to press the lower strings. It's rather thicker than most modern necks, so it's not usually used for playing fast solos.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Cort G300 Pro is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Fret Size
The Gibson Custom Peter Frampton Phenix Inspired Les Paul Custom has Jumbo frets, which should be taller than the Cort G300 Pro's Medium frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
