Show Full Spec Comparison
Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top | Schecter Hellraiser Hybrid PT | |
---|---|---|
General | ||
Brand: | Gibson Custom | Schecter |
Year: | 2024 | 2015 |
Configuration: | HH | HH |
Strings: | 6 | 6 |
Made in: | United States | South Korea |
Series: | Modern | Hellraiser Hybrid |
Colors: | Orange | Black, Purple |
Left-Handed Version: | No | No |
Body | ||
Type: | Solid Body | Solid Body |
Body Material: | 1-Piece Mahogany | Mahogany |
Bridge: | Stop Bar | Hipshot Hardtail (.125) w/ String Thru Body |
Neck | ||
Neck Joint: | Set | Set |
Tuners: | Grover with Kidney Button | Schecter Locking |
Fretboard: | Dark Ebony | Ebony |
Neck Material: | Mahogany | Maple 3-pc |
Decoration: | Mother of Pearl Block | Offset/Reverse Dots |
Scale Size: | 24.75" | 25.5" |
Shape: | 50s Rounded Medium C | Ultra Thin C |
Frets: | 22 Medium Jumbo Nickel Silver | 24 XL Jumbo Nickel Silver |
Fretboard Radius: | 12" | 12" to 16" |
Nut: | Corian | Black Tusq XL |
Nut Width: | 42.9mm (1.688'') | 42mm (1.654'') |
Electronics | ||
Bridge Pickups: | 498T Humbucker (Humbucker / Passive) | EMG 57 (Humbucker / Active) |
Middle Pickup: | ||
Neck Pickup: | 490R Humbucker (Humbucker / Passive) | EMG 66 (Humbucker / Active) |
Switch: | 3 Way | 3 Way |
Knobs: | Speed | Dome |
Pickup Mods: | None | None |
Volume Controls: | 2 | 1 |
Tone Controls: | 2 | 1 |
Hardware | ||
Strap Lock: | No | No |
Hardware Color: | Gold | Black & Chrome |
Show Diagrams Comparison
Reasons to Get
Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top over Schecter Hellraiser Hybrid PT
Reasons to Get
Schecter Hellraiser Hybrid PT over Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top
Other Key Differences
Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top vs Schecter Hellraiser Hybrid PT
Shared Features
Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top vs Schecter Hellraiser Hybrid PT
Common Strengths
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Stays in Tune (Evertune)
- High-Quality Frets
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top Prices
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top favors large hands more than the Schecter Hellraiser Hybrid PT. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top:
Schecter Hellraiser Hybrid PT:
Beginner Friendliness
The Schecter Hellraiser Hybrid PT meets 7 out of our 8 criteria items for beginner friendliness, while the Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Schecter Hellraiser Hybrid PT- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the Schecter Hellraiser Hybrid PT
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Winner: Tie.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
We found the same or similar pickups to the Schecter Hellraiser Hybrid PT's online:
The Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top's pickups are Passive while the Schecter Hellraiser Hybrid PT's are Active.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top compares to the Schecter Hellraiser Hybrid PT.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top is built in United States while the Schecter Hellraiser Hybrid PT is made in South Korea.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top has a Corian nut. It used to be the go-to nut for Gibson, but it's slowly being replaced by Graph Tech (Tusq). It's a synthetic material made to be similar to Bone, but it doesn't have the same self-lubricating properties, and it's less resistant.
On the other hand, the Schecter Hellraiser Hybrid PT comes with a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
Winner: Schecter Hellraiser Hybrid PT.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Schecter Hellraiser Hybrid PT has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Schecter Hellraiser Hybrid PT.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top
- Made in United States
- Expensive Wood
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- No High-Quality Nut
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Schecter Hellraiser Hybrid PT
- Locking Tuners
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Compound Radius Fretboard
- Cheap Fret Wire (NS)
- Made in South Korea
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference
This means that it will be more difficult to do bar chords on the Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Schecter Hellraiser Hybrid PT has the longest scale: 25.5". The Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top and the Schecter Hellraiser Hybrid PT have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Schecter Hellraiser Hybrid PT is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Fret Size
The Schecter Hellraiser Hybrid PT has XL Jumbo frets, which should be taller than the Gibson Custom Les Paul Custom 1-Piece 5A Quilt Maple Top's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.