Show Full Spec Comparison
| Fender Vintera III Mid '60s Jazzmaster | Ibanez RGR52ET | |
|---|---|---|
| General | ||
| Brand: | Fender | Ibanez |
| Year: | 2026 | 2025 |
| Configuration: | SS | HH |
| Strings: | 6 | 6 |
| Made in: | Mexico | Indonesia |
| Series: | Vintera III | RG |
| Colors: | White, Blue, Red | Black |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Alder | Nyatoh |
| Bridge: | 6-Saddle Vintage-Style Adjustable with “Floating” Tremolo Tailpiece | Evertune |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Fender Vintage-Style | Gotoh machine heads |
| Fretboard: | Round-Laminated Rosewood | Macassar Ebony |
| Neck Material: | Maple | 3pc Maple |
| Decoration: | Clay Dot | White Step off-set dot inlay |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Mid '60s "C" | Wizard III |
| Frets: | 21 Vintage Nickel Silver | 24 Jumbo Nickel Silver |
| Fretboard Radius: | 7.25" | 15.748" |
| Nut: | Bone | Plastic |
| Nut Width: | 41.9mm (1.65'') | 43mm (1.693'') |
| Electronics | ||
| Bridge Pickups: | Vintage-Style Mid 60s Single-Coil Jazzmaster (Single Coil / Passive) | Fishman Fluence Modern Humbucker Ceramic (Humbucker / Active) |
| Middle Pickup: | ||
| Neck Pickup: | Vintage-Style Mid 60s Single-Coil Jazzmaster (Single Coil / Passive) | Fishman Fluence Modern Humbucker Alnico (Humbucker / Active) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Bell | Dome |
| Pickup Mods: | Multi-Voicing | Coil Tap |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Nickel | Black |
Show Diagrams Comparison
Reasons to Get
Fender Vintera III Mid '60s Jazzmaster over Ibanez RGR52ET
Reasons to Get
Ibanez RGR52ET over Fender Vintera III Mid '60s Jazzmaster
Other Key Differences
Fender Vintera III Mid '60s Jazzmaster vs Ibanez RGR52ET
Shared Features
Fender Vintera III Mid '60s Jazzmaster vs Ibanez RGR52ET
Common Strengths
- From a High-Quality-Standards Country
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Weight Relief
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Fender Vintera III Mid '60s Jazzmaster:
Ibanez RGR52ET:
Beginner Friendliness
The Fender Vintera III Mid '60s Jazzmaster meets 75 out of our 8 criteria items for beginner friendliness, while the Ibanez RGR52ET meets only 67. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Fender Vintera III Mid '60s Jazzmaster- Comfortable shape
- Easy-to-use bridge
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Tall frets
- Short scale
- Locking tuners
New Player Friendliness
Ibanez RGR52ET- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Fender Vintera III Mid '60s Jazzmaster
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Ibanez RGR52ET
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Nyatoh has been replacing Mahogany for guitar building. It's fairly hard, durable, more sustentable and common than Mahogany. Find out more about Nyatoh.
Winner: Tie.
Pickup Configuration
The Fender Vintera III Mid '60s Jazzmaster has an SS configuration while the Ibanez RGR52ET has HH pickups.
SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Fender Vintera III Mid '60s Jazzmaster has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
The Fender Vintera III Mid '60s Jazzmaster's pickups are Passive while the Ibanez RGR52ET's are Active.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Fender Vintera III Mid '60s Jazzmaster.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Both give you different pickup mod options.
The Fender Vintera III Mid '60s Jazzmaster offers Multi-Voicing.
Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.
On the other hand, the Ibanez RGR52ET comes with the following: Coil Tap.
Coil Tap is similar to Coil Split but it works a bit differently. Instead of completely cancelling one of the coils of the humbucker, it only cuts part of the output once activated. Some people believe this gives the split pickups a more real single-coil sound.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Vintera III Mid '60s Jazzmaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Vintera III Mid '60s Jazzmaster compares to the Ibanez RGR52ET.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Fender Vintera III Mid '60s Jazzmaster is built in Mexico while the Ibanez RGR52ET is made in Indonesia.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Fender Vintera III Mid '60s Jazzmaster has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
On the other hand, the Ibanez RGR52ET comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
Winner: Fender Vintera III Mid '60s Jazzmaster.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Fender Vintera III Mid '60s Jazzmaster's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
On the other hand, the Ibanez RGR52ET's is a Evertune. It will keep your guitar in tune and intonated until the next string swap. If you really like extremely subtle vibratos, this might not be the bridge for you because you won't be able to perform them as well. However, the fact that you won't need to tune your guitar is a huge advantage that many people will gladly pay the extra price for.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Ibanez RGR52ET.
Tuners
Both come with regular tuners. The Fender Vintera III Mid '60s Jazzmaster's are Fender Vintage-Style while the Ibanez RGR52ET's are Gotoh machine heads
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Fender Vintera III Mid '60s Jazzmaster
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Multi-Voicing Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Ibanez RGR52ET
- Expensive Wood
- Top Brand Pickups
- Coil Tap Pickups
- Stays in Tune (Evertune)
- Luminescent Inlay
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No High-Quality Nut
- No Neck-Through Build
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Ibanez RGR52ET has the wider nut with 43mm (1.693'') vs 41.9mm (1.65''). This is a 1.1mm (0.043'') difference
This means that it will be more difficult to do bar chords on the Ibanez RGR52ET, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Fender Vintera III Mid '60s Jazzmaster has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Ibanez RGR52ET, on the other hand, has a Wizard neck. This is thinner than most C-type necks. It won't get in your way if you want to play fast solos. It's not as slim as 'Super Wizard' necks, so it might fit you better if you don't like ultra-thin necks.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Vintera III Mid '60s Jazzmaster's fingerboard radius is smaller, which means it's more curved than the Ibanez RGR52ET's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Ibanez RGR52ET.
Fret Size
The Ibanez RGR52ET has Jumbo frets, which should be taller than the Fender Vintera III Mid '60s Jazzmaster's Vintage frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
