Show Full Spec Comparison
| Fender Vintera III Late '50s Telecaster | Player II Modified Stratocaster HSS Floyd Rose | |
|---|---|---|
| General | ||
| Brand: | Fender | Fender |
| Year: | 2026 | 2025 |
| Configuration: | SS | HSS |
| Strings: | 6 | 6 |
| Made in: | Mexico | United States |
| Series: | Vintera III | Player II Modified |
| Colors: | Green, Red, Yellow | White, Black, Red |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Alder | Alder |
| Bridge: | 3-Saddle Vintage Style Tele with Barrel Steel Saddles | Floyd Rose Special Double-Locking Tremolo |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Fender Vintage-Style | Standard Cast/Sealed |
| Fretboard: | Maple | Rosewood |
| Neck Material: | 1-Piece Maple | Maple |
| Decoration: | Black Dot | White Dot |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Late '50s "V" | Modern "C" |
| Frets: | 21 Vintage Nickel Silver | 22 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 7.25" | 12" |
| Nut: | Bone | Locking |
| Nut Width: | 41.9mm (1.65'') | 42.9mm (1.688'') |
| Electronics | ||
| Bridge Pickups: | Vintage-Style Late 50s Single-Coil Tele (Single Coil / Passive) | Player II Modified Humbucker (Humbucker / Passive) |
| Middle Pickup: | Player II Noiseless Strat (Single Coil / Passive) | |
| Neck Pickup: | Vintage-Style Late 50s Single-Coil Tele (Single Coil / Passive) | Player II Noiseless Strat (Single Coil / Passive) |
| Switch: | 3 Way | 5 Way |
| Knobs: | Dome | Bell |
| Pickup Mods: | None | Coil Split |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 2 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Nickel | Nickel |
Show Diagrams Comparison
Reasons to Get
Fender Vintera III Late '50s Telecaster over Player II Modified Stratocaster HSS Floyd Rose
Reasons to Get
Fender Player II Modified Stratocaster HSS Floyd Rose over Vintera III Late '50s Telecaster
Other Key Differences
Fender Vintera III Late '50s Telecaster vs Player II Modified Stratocaster HSS Floyd Rose
Shared Features
Fender Vintera III Late '50s Telecaster vs Player II Modified Stratocaster HSS Floyd Rose
Common Strengths
- High-Quality Nut
- Top Pickup Brand
Common Weaknesses
- Neck-Through Build
- Weight Relief
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Vintera III Late '50s Telecaster favors large hands more than the Fender Player II Modified Stratocaster HSS Floyd Rose.
Fender Vintera III Late '50s Telecaster:
Fender Player II Modified Stratocaster HSS Floyd Rose:
Beginner Friendliness
The Fender Vintera III Late '50s Telecaster meets 75 out of our 8 criteria items for beginner friendliness, while the Fender Player II Modified Stratocaster HSS Floyd Rose meets only 67. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Fender Vintera III Late '50s Telecaster- Comfortable shape
- Easy-to-use bridge
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Tall frets
- Short scale
- Locking tuners
New Player Friendliness
Fender Player II Modified Stratocaster HSS Floyd Rose- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Fender Player II Modified Stratocaster HSS Floyd Rose
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Winner: Fender Player II Modified Stratocaster HSS Floyd Rose.
Pickup Configuration
The Fender Vintera III Late '50s Telecaster has an SS configuration while the Fender Player II Modified Stratocaster HSS Floyd Rose has HSS pickups.
SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
On the other hand, HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Fender Vintera III Late '50s Telecaster has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender Vintera III Late '50s Telecaster.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender Player II Modified Stratocaster HSS Floyd Rose gives you 5 switch options while the Fender Vintera III Late '50s Telecaster gives you 3. This means that the Fender Player II Modified Stratocaster HSS Floyd Rose gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the Fender Player II Modified Stratocaster HSS Floyd Rose comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Player II Modified Stratocaster HSS Floyd Rose.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Vintera III Late '50s Telecaster compares to the Fender Player II Modified Stratocaster HSS Floyd Rose.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Fender Vintera III Late '50s Telecaster is built in Mexico while the Fender Player II Modified Stratocaster HSS Floyd Rose is made in United States.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Fender Player II Modified Stratocaster HSS Floyd Rose
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Fender Vintera III Late '50s Telecaster has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
On the other hand, the Fender Player II Modified Stratocaster HSS Floyd Rose comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Fender Vintera III Late '50s Telecaster's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Fender Player II Modified Stratocaster HSS Floyd Rose's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Fender Player II Modified Stratocaster HSS Floyd Rose.
Tuners
Both come with regular tuners. The Fender Vintera III Late '50s Telecaster's are Fender Vintage-Style while the Fender Player II Modified Stratocaster HSS Floyd Rose's are Standard Cast/Sealed
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Fender Vintera III Late '50s Telecaster
- Bone Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender Player II Modified Stratocaster HSS Floyd Rose
- Made in United States
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Tremolo
- Retainer Bar
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Fender Player II Modified Stratocaster HSS Floyd Rose has the wider nut with 42.9mm (1.688'') vs 41.9mm (1.65''). This is a 1mm (0.038'') difference
This means that it will be more difficult to do bar chords on the Fender Player II Modified Stratocaster HSS Floyd Rose, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Fender Vintera III Late '50s Telecaster has a V type of neck. This neck shape was more common during Fender's early years. Some people like it because they use their thumb over the edge of the fretboard to press the lower strings. It's rather thicker than most modern necks, so it's not usually used for playing fast solos.
The Fender Player II Modified Stratocaster HSS Floyd Rose, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Vintera III Late '50s Telecaster's fingerboard radius is smaller, which means it's more curved than the Fender Player II Modified Stratocaster HSS Floyd Rose's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Fender Player II Modified Stratocaster HSS Floyd Rose.
Fret Size
The Fender Player II Modified Stratocaster HSS Floyd Rose has Medium Jumbo frets, which should be taller than the Fender Vintera III Late '50s Telecaster's Vintage frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
