Show Full Spec Comparison
| Fender Richie Kotzen Stratocaster | Reverend Crosscut | |
|---|---|---|
| General | ||
| Brand: | Fender | Reverend |
| Year: | 2025 | 2021 |
| Configuration: | SSS | HH |
| Strings: | 6 | 6 |
| Made in: | Japan | South Korea |
| Series: | Made in Japan Artist | Bolt-On |
| Colors: | White, Red | Green, Purple, Natural, Red Burst |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Ash with Flame Maple Laminated Top | Korina |
| Bridge: | 6-Saddle Vintage-Style Synchronized Tremolo | String-Thru-Body Hardtail |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Gotoh with Pearl Buttons | Reverend Pin-Lock |
| Fretboard: | Maple | Rosewood |
| Neck Material: | Maple | Roasted Maple |
| Decoration: | Abalone dot | Dots |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Thick "C" | Medium Oval |
| Frets: | 22 XL Jumbo Nickel Silver | 22 Jumbo Nickel Silver |
| Fretboard Radius: | 12" | 12" |
| Nut: | Synthetic Bone | Boneite |
| Nut Width: | 41.9mm (1.65'') | 43mm (1.693'') |
| Electronics | ||
| Bridge Pickups: | DiMarzio Custom Single Coil (Single Coil / Passive) | Cleancut Bridge (Humbucker / Passive) |
| Middle Pickup: | DiMarzio Custom Single Coil (Single Coil / Passive) | |
| Neck Pickup: | DiMarzio Custom Single Coil (Single Coil / Passive) | Cleancut Neck (Humbucker / Passive) |
| Switch: | 5 Way | 3 Way |
| Knobs: | Bell | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 2 | 2 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Gold | Chrome |
Show Diagrams Comparison
Reasons to Get
Fender Richie Kotzen Stratocaster over Reverend Crosscut
Reasons to Get
Reverend Crosscut over Fender Richie Kotzen Stratocaster
Other Key Differences
Fender Richie Kotzen Stratocaster vs Reverend Crosscut
Shared Features
Fender Richie Kotzen Stratocaster vs Reverend Crosscut
Common Strengths
- High-Quality Nut
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Reverend Crosscut favors large hands more than the Fender Richie Kotzen Stratocaster.
Fender Richie Kotzen Stratocaster:
Reverend Crosscut:
Beginner Friendliness
The Fender Richie Kotzen Stratocaster meets 83 out of our 8 criteria items for beginner friendliness, while the Reverend Crosscut meets only 75. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Fender Richie Kotzen Stratocaster- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
New Player Friendliness
Reverend Crosscut- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Fender Richie Kotzen Stratocaster
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Woods Used in the Reverend Crosscut
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Limba is a relatively rare wood that shows exotic tight dark grain stripes. It comes in white or black. As a tonewood, it is comparable to Mahogany but with richer mids. Find out more about Limba.
Winner: Reverend Crosscut.
Pickup Configuration
The Fender Richie Kotzen Stratocaster has an SSS configuration while the Reverend Crosscut has HH pickups.
SSS is perfect for players who like to play clean. The definition you get between notes and the crispiness is unmatched by most other configurations. You can still use it for distortion, but you won't get the same kind of output and power compared to a humbucker, and the hum they produce also makes them less adequate for high gain.
On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Fender Richie Kotzen Stratocaster has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender Richie Kotzen Stratocaster.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender Richie Kotzen Stratocaster gives you 5 switch options while the Reverend Crosscut gives you 3. This means that the Fender Richie Kotzen Stratocaster gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Richie Kotzen Stratocaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Richie Kotzen Stratocaster compares to the Reverend Crosscut.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Fender Richie Kotzen Stratocaster is built in Japan while the Reverend Crosscut is made in South Korea.
Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Fender Richie Kotzen Stratocaster
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Fender Richie Kotzen Stratocaster has a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
On the other hand, the Reverend Crosscut comes with a Boneite nut. This is an artificial material made to imitate the favored type of nut: bone. This allows it to sound and feel pretty much like bone, but without the inconsistency of natural materials.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Fender Richie Kotzen Stratocaster's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
On the other hand, the Reverend Crosscut's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Reverend Crosscut has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Reverend Crosscut.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Fender Richie Kotzen Stratocaster
- Made in Japan
- Expensive Wood
- Synthetic Bone Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Reverend Crosscut
- Locking Tuners
- Expensive Wood
- Boneite Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- Made in South Korea
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Reverend Crosscut has the wider nut with 43mm (1.693'') vs 41.9mm (1.65''). This is a 1.1mm (0.043'') difference
This means that it will be more difficult to do bar chords on the Reverend Crosscut, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Fender Richie Kotzen Stratocaster and the Reverend Crosscut have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Fender Richie Kotzen Stratocaster and the Reverend Crosscut have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.
Fret Size
The Fender Richie Kotzen Stratocaster has XL Jumbo frets, which should be taller than the Reverend Crosscut's Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
