Swap
Swap
Fender Made in Japan Limited International Color Telecaster
Harley Benton Fusion-T HH HT Roasted
VS
Playability
68
Sound
72
Build
67
Value
69
Score
69
FIND IT ON:
Reverb logo
Playability
72
Sound
77
Build
68
Value
82
Score
72
FIND IT ON:
Reverb logo
Add to Compare
Discuss or ask a question
Add to Compare
Discuss or ask a question
Side to side spec comparison >

Fender Made in Japan Limited International Color Telecaster vs Harley Benton Fusion-T HH HT Roasted

Reasons to Get
Fender Made in Japan Limited International Color Telecaster over Harley Benton Fusion-T HH HT Roasted

Country of Manufacturing
Japan vs Indonesia
Built with higher quality standards
Release Year
2023 vs 2020
From a more recent year
Neck Profile
U Shape vs Harley Benton Modern C
Comfortable neck with more grip
Pickups
SS vs HH
Beautiful cleans
Nut Width
1.615'' (41mm) vs 1.654'' (42mm)
Favors small hands, easier bar chords and other shapes
Fretboard Radius
9.5'' (241.3mm) vs 12'' (304.8mm)
Easier to play chords without muting strings

Reasons to Get
Harley Benton Fusion-T HH HT Roasted over Fender Made in Japan Limited International Color Telecaster

Decorative Top
Flamed maple veneer vs None
Finished with beautiful natural wood patterns
Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Neck Profile
Harley Benton Modern C vs U Shape
Comfortable neck that works for most people
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Pickups
HH vs SS
High output without hum
Number of Frets
22 vs 21
Allows to reach higher notes
Locking Tuners
Yes vs None
Easier to change strings
Nut Width
1.654'' (42mm) vs 1.615'' (41mm)
Less likely to mute strings by accident and more space for fingerstyle
Fretboard Radius
12'' (304.8mm) vs 9.5'' (241.3mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
82 vs 69
Better price/quality relationship

Other Key Differences
Fender Made in Japan Limited International Color Telecaster vs Harley Benton Fusion-T HH HT Roasted

Bridge Pickup
Fender Vintage-Style Single-Coil Tele vs Roswell LAF-B-CR Alnico-5
Different Bridge Pickup
Neck Pickup
Fender Vintage-Style Single-Coil Tele vs Roswell LAF-N-CR Alnico-5
Different Neck Pickup
Body Wood
Basswood vs Sapele
Different Body Wood
Neck Wood
Maple vs Roasted Maple
Different Neck Wood
Fretboard Wood
Maple vs Roasted Maple
Different Fretboard Wood
Nut Material
Bone vs Ivory Tusq
Different Nut Material

Shared Features
Fender Made in Japan Limited International Color Telecaster vs Harley Benton Fusion-T HH HT Roasted

Headstock
6
Same Headstock
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Joint
Bolt-On
Allows you to detach and swap the neck
Type of Frets
Medium Jumbo
You'll feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • High-Quality Frets
  • Top Pickup Brand

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • Expensive Wood
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Fender Made in Japan Limited International Color Telecaster Prices

SET PRICE ALERT

Harley Benton Fusion-T HH HT Roasted Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better for Beginners?

Both meet 6 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Fender Made in Japan Limited International Color Telecaster
  • Comfortable shape
  • Easy-to-use bridge
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners

New Player Friendliness

Harley Benton Fusion-T HH HT Roasted
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Fender Made in Japan Limited International Color Telecaster

Maple wood pattern used for guitar building
Maple
Basswood wood pattern used for guitar building
Basswood

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Woods Used in the Harley Benton Fusion-T HH HT Roasted

Roasted Maple wood pattern used for guitar building
Roasted Maple
Sapele wood pattern used for guitar building
Sapele

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

It's similar to Mahogany in both color and tone. It can produce warm tones, and it's known for its beautiful figured grain patterns. Find out more about Sapele.

Winner: Tie.

Pickup Configuration

The Fender Made in Japan Limited International Color Telecaster has an SS configuration while the Harley Benton Fusion-T HH HT Roasted has HH pickups.

SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Fender Made in Japan Limited International Color Telecaster has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

You can purchase similar pickups to the Fender Made in Japan Limited International Color Telecaster's and use them on any guitar:

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Fender Made in Japan Limited International Color Telecaster.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the Harley Benton Fusion-T HH HT Roasted comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Fender Made in Japan Limited International Color Telecaster pickups switch and push knobs diagram
Fender Made in Japan Limited International Color Telecaster's switch options
Harley Benton Fusion-T HH HT Roasted pickups switch and push knobs diagram
Harley Benton Fusion-T HH HT Roasted's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Harley Benton Fusion-T HH HT Roasted.

Final Sound Quality Scores

Fender Made in Japan Limited International Color Telecaster
Pickups 100
Sustain 65
Versatility 54
Tuning Stability 70
Sound 72
Harley Benton Fusion-T HH HT Roasted
Pickups 90
Sustain 75
Versatility 64
Tuning Stability 80
Sound 77

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Made in Japan Limited International Color Telecaster compares to the Harley Benton Fusion-T HH HT Roasted.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Fender Made in Japan Limited International Color Telecaster is built in Japan while the Harley Benton Fusion-T HH HT Roasted is made in Indonesia.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Fender Made in Japan Limited International Color Telecaster

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Fender Made in Japan Limited International Color Telecaster has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Harley Benton Fusion-T HH HT Roasted comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Harley Benton Fusion-T HH HT Roasted is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Harley Benton Fusion-T HH HT Roasted.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Harley Benton Fusion-T HH HT Roasted has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Harley Benton Fusion-T HH HT Roasted.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Fender Made in Japan Limited International Color Telecaster
  • Made in Japan
  • Bone Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Expensive Woods
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Harley Benton Fusion-T HH HT Roasted
  • Stainless Steel Frets
  • Locking Tuners
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Made in Indonesia
  • No Expensive Woods
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Fender Made in Japan Limited International Color Telecaster
Quality of materials 66
Features 50
Quality Control 85
Build Quality 67
Harley Benton Fusion-T HH HT Roasted
Quality of materials 73
Features 65
Quality Control 65
Build Quality 68

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Fender Made in Japan Limited International Color Telecaster Nut Width
Fender Made in Japan Limited International Color Telecaster Nut Width
Harley Benton Fusion-T HH HT Roasted Nut Width
Harley Benton Fusion-T HH HT Roasted Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Harley Benton Fusion-T HH HT Roasted has the wider nut with 42mm (1.654'') vs 41mm (1.615''). This is a 1mm (0.039'') difference

This means that it will be more difficult to do bar chords on the Harley Benton Fusion-T HH HT Roasted, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Fender Made in Japan Limited International Color Telecaster and Harley Benton Fusion-T HH HT Roasted's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Fender Made in Japan Limited International Color Telecaster Neck Profile
Fender Made in Japan Limited International Color Telecaster's neck profile
Harley Benton Fusion-T HH HT Roasted Neck Profile
Harley Benton Fusion-T HH HT Roasted's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Fender Made in Japan Limited International Color Telecaster has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The Harley Benton Fusion-T HH HT Roasted, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Fender Made in Japan Limited International Color Telecaster Fingerboard Radius
Fender Made in Japan Limited International Color Telecaster's Fingerboard radius
Harley Benton Fusion-T HH HT Roasted Fingerboard Radius
Harley Benton Fusion-T HH HT Roasted's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Fender Made in Japan Limited International Color Telecaster's fingerboard radius is smaller, which means it's more curved than the Harley Benton Fusion-T HH HT Roasted's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Harley Benton Fusion-T HH HT Roasted.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Made in Japan Limited International Color Telecaster favors large hands more than the Harley Benton Fusion-T HH HT Roasted.

Fender Made in Japan Limited International Color Telecaster:
Big Hands
Small Hands
Harley Benton Fusion-T HH HT Roasted:
Big Hands
Small Hands

Fret Size

Fender Made in Japan Limited International Color Telecaster and Harley Benton Fusion-T HH HT Roasted Frets Size
Both have a similar Medium Jumbo fret size

Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.

Final Playability Scores

Fender Made in Japan Limited International Color Telecaster
Bending & Vibrato Ease 65
Chord Playability 90
Solo Playability 50
Playability 68
Harley Benton Fusion-T HH HT Roasted
Bending & Vibrato Ease 75
Chord Playability 70
Solo Playability 70
Playability 72

Specs Side-by-Side

Fender Made in Japan Limited International Color Telecaster vs Harley Benton Fusion-T HH HT Roasted
General Fender Made in Japan Limited International Color Telecaster Harley Benton Fusion-T HH HT Roasted
Brand: Fender Harley Benton
Year: 2023 2020
Configuration: SS HH
Strings: 6 6
Made in: Japan Indonesia
Series: Made in Japan Limited International Pro
Colors: Natural
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Basswood Sapele
Bridge: 3-Saddle Vintage-Style Strings-Through-Body Tele with Chrome Barrel Saddles WSC HPS-6 Custom hardtail
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: Fender Vintage F Stamped WSC staggered locking die-cast
Fretboard: Maple Roasted Maple
Neck Material: Maple Roasted Maple
Decoration: Black Dot Dots
Scale Size: 25.5" 25.5"
Shape: U Shape Harley Benton Modern C
Frets: 21 Medium Jumbo Nickel Silver 22 Medium Jumbo Stainless Steel
Fretboard Radius: 9.5" 12"
Nut: Bone Ivory Tusq
Nut Width: 41mm (1.615'') 42mm (1.654'')
Electronics
Bridge Pickup: Fender Vintage-Style Single-Coil Tele (Single Coil / Passive) Roswell LAF-B-CR Alnico-5 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Fender Vintage-Style Single-Coil Tele (Single Coil / Passive) Roswell LAF-N-CR Alnico-5 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Coil Split
Volume Controls: 1 1
Tone Controls: 1 1