Swap
Swap
Fender Limited Edition Tom DeLonge Stratocaster
Schecter Jake Pitts E-1 FR
VS
Playability
68
Sound
69
Build
64
Value
67
Score
67
FIND IT ON:
Reverb logo
Playability
77
Sound
81
Build
65
Value
74
Score
74
FIND IT ON:
Reverb logo
Add to Compare
Discuss or ask a question
Add to Compare
Discuss or ask a question
Side to side spec comparison >

Fender Limited Edition Tom DeLonge Stratocaster vs Schecter Jake Pitts E-1 FR

Reasons to Get
Fender Limited Edition Tom DeLonge Stratocaster over Schecter Jake Pitts E-1 FR

Release Year
2023 vs 2017
From a more recent year
Type of Frets
Medium Jumbo vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Pickups
H vs HH
Hum-free with more right hand freedom and sustain
Neck Thickness at 1st Fret
0.82'' (20.8mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.787'' (20mm)
More comfortable at higher frets for big hands
Nut Width
1.65'' (41.9mm) vs 1.625'' (41.3mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Fretboard Radius
9.5'' (241.3mm) vs 14'' (355.6mm)
Easier to play chords without muting strings
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Reasons to Get
Schecter Jake Pitts E-1 FR over Fender Limited Edition Tom DeLonge Stratocaster

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Switch Positions
3 vs 0
More tone options
Tone Knobs
1 vs 0
More tone control
Pickups
HH vs H
High output without hum
Number of Frets
24 vs 21
Allows to reach higher notes
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.82'' (20.8mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Nut Width
1.625'' (41.3mm) vs 1.65'' (41.9mm)
Favors small hands, easier bar chords and other shapes
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs
Fretboard Radius
14'' (355.6mm) vs 9.5'' (241.3mm)
Flatter fretboard makes it easier to play single notes and bend
Pickups Power
Active vs Passive
More output
Value Score
74 vs 67
Better price/quality relationship

Other Key Differences
Fender Limited Edition Tom DeLonge Stratocaster vs Schecter Jake Pitts E-1 FR

Bridge Pickup
Fender Seymour Duncan Invader SH8 Humbucking vs EMG 81
Different Bridge Pickup
Body Wood
Alder vs Mahogany
Different Body Wood
Fretboard Wood
Rosewood vs Ebony
Different Fretboard Wood
Nut Material
Synthetic Bone vs Locking
Different Nut Material

Shared Features
Fender Limited Edition Tom DeLonge Stratocaster vs Schecter Jake Pitts E-1 FR

Neck Wood
Maple
Same Neck Wood
Headstock
6
Same Headstock
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Neck Profile Type
C
Comfortable neck that works for most people

Common Strengths

  • High-Quality Nut
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Fender Limited Edition Tom DeLonge Stratocaster Prices

SET PRICE ALERT

Schecter Jake Pitts E-1 FR Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better for Beginners?

The Fender Limited Edition Tom DeLonge Stratocaster meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter Jake Pitts E-1 FR meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Fender Limited Edition Tom DeLonge Stratocaster
  • Comfortable shape
  • Easy-to-use bridge
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners

New Player Friendliness

Schecter Jake Pitts E-1 FR
  • Comfortable shape
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Woods Used in the Fender Limited Edition Tom DeLonge Stratocaster

Rosewood wood pattern used for guitar building
Rosewood
Alder wood pattern used for guitar building
Alder

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Schecter Jake Pitts E-1 FR

Ebony wood pattern used for guitar building
Ebony
Mahogany wood pattern used for guitar building
Mahogany

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Winner: Schecter Jake Pitts E-1 FR.

Pickup Configuration

The Fender Limited Edition Tom DeLonge Stratocaster has an H configuration while the Schecter Jake Pitts E-1 FR has HH pickups.

A single H pickup gives you the advantage of having a little longer sustain (all other things being equal) because there will be less magnetic fields from other pickups affecting the strings' vibration. However, they also give you the least versatility because you won't have other pickups at different distances from the bridge to create different tones. A single humbucking pickup is used for noiseless high output, which is used mainly for Hard Rock genres.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Schecter Jake Pitts E-1 FR has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

We found the same or similar pickups to the Schecter Jake Pitts E-1 FR's online:

The Fender Limited Edition Tom DeLonge Stratocaster's pickups are Passive while the Schecter Jake Pitts E-1 FR's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Schecter Jake Pitts E-1 FR.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Schecter Jake Pitts E-1 FR gives you 3 switch options while the Fender Limited Edition Tom DeLonge Stratocaster gives you 0. This means that the Schecter Jake Pitts E-1 FR gives you more options to find the right pickup combination for the type of sound you want to achieve

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

The Fender Limited Edition Tom DeLonge Stratocaster doesn't come with pickup switching options.

Schecter Jake Pitts E-1 FR pickups switch and push knobs diagram
Schecter Jake Pitts E-1 FR's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Jake Pitts E-1 FR.

Final Sound Quality Scores

Fender Limited Edition Tom DeLonge Stratocaster
Pickups 90
Sustain 75
Versatility 42
Tuning Stability 70
Sound 69
Schecter Jake Pitts E-1 FR
Pickups 95
Sustain 85
Versatility 59
Tuning Stability 85
Sound 81

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Limited Edition Tom DeLonge Stratocaster compares to the Schecter Jake Pitts E-1 FR.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Fender Limited Edition Tom DeLonge Stratocaster is built in Mexico while the Schecter Jake Pitts E-1 FR is made in South Korea.

Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Fender Limited Edition Tom DeLonge Stratocaster has a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.

On the other hand, the Schecter Jake Pitts E-1 FR comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Fender Limited Edition Tom DeLonge Stratocaster's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Schecter Jake Pitts E-1 FR's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Schecter Jake Pitts E-1 FR.

Tuners

Both come with regular tuners. The Fender Limited Edition Tom DeLonge Stratocaster's are Fender Vintage-Style while the Schecter Jake Pitts E-1 FR's are Grover Rotomatic 18:1

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Fender Limited Edition Tom DeLonge Stratocaster has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the Schecter Jake Pitts E-1 FR comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Fender Limited Edition Tom DeLonge Stratocaster.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Fender Limited Edition Tom DeLonge Stratocaster
  • Expensive Wood
  • Synthetic Bone Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Mexico
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Jake Pitts E-1 FR
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Tremolo
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in South Korea
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Fender Limited Edition Tom DeLonge Stratocaster
Quality of materials 66
Features 50
Quality Control 75
Build Quality 64
Schecter Jake Pitts E-1 FR
Quality of materials 56
Features 65
Quality Control 75
Build Quality 65

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Fender Limited Edition Tom DeLonge Stratocaster Nut Width
Fender Limited Edition Tom DeLonge Stratocaster Nut Width
Schecter Jake Pitts E-1 FR Nut Width
Schecter Jake Pitts E-1 FR Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Fender Limited Edition Tom DeLonge Stratocaster has the wider nut with 41.9mm (1.65'') vs 41.3mm (1.625''). This is a 0.6mm (0.025'') difference

This means that it will be more difficult to do bar chords on the Fender Limited Edition Tom DeLonge Stratocaster, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Fender Limited Edition Tom DeLonge Stratocaster and Schecter Jake Pitts E-1 FR's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Fender Limited Edition Tom DeLonge Stratocaster Neck Profile
Fender Limited Edition Tom DeLonge Stratocaster's neck profile
Schecter Jake Pitts E-1 FR Neck Profile
Schecter Jake Pitts E-1 FR's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Fender Limited Edition Tom DeLonge Stratocaster and the Schecter Jake Pitts E-1 FR have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Fender Limited Edition Tom DeLonge Stratocaster Fingerboard Radius
Fender Limited Edition Tom DeLonge Stratocaster's Fingerboard radius
Schecter Jake Pitts E-1 FR Fingerboard Radius
Schecter Jake Pitts E-1 FR's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Fender Limited Edition Tom DeLonge Stratocaster's fingerboard radius is smaller, which means it's more curved than the Schecter Jake Pitts E-1 FR's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Jake Pitts E-1 FR.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Limited Edition Tom DeLonge Stratocaster favors large hands more than the Schecter Jake Pitts E-1 FR. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Fender Limited Edition Tom DeLonge Stratocaster:
Big Hands
Small Hands
Schecter Jake Pitts E-1 FR:
Big Hands
Small Hands

Fret Size

Fender Limited Edition Tom DeLonge Stratocaster Frets Size
Fender Limited Edition Tom DeLonge Stratocaster's Frets Size
Schecter Jake Pitts E-1 FR Frets Size
Schecter Jake Pitts E-1 FR's Frets Size

The Schecter Jake Pitts E-1 FR has XL Jumbo frets, which should be taller than the Fender Limited Edition Tom DeLonge Stratocaster's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Fender Limited Edition Tom DeLonge Stratocaster
Bending & Vibrato Ease 65
Chord Playability 80
Solo Playability 60
Playability 68
Schecter Jake Pitts E-1 FR
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 90
Playability 77

Specs Side-by-Side

Fender Limited Edition Tom DeLonge Stratocaster vs Schecter Jake Pitts E-1 FR
General Fender Limited Edition Tom DeLonge Stratocaster Schecter Jake Pitts E-1 FR
Brand: Fender Schecter
Year: 2023 2017
Configuration: H HH
Strings: 6 6
Made in: Mexico South Korea
Series: Limited Edition Tom DeLonge Stratocaster Artist
Colors: White
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Alder Mahogany
Bridge: 6-Saddle String-Through-Body Hardtail With Block Saddles Floyd Rose 1500 Series
Neck
Neck Joint: Bolt-On Set
Tuners: Fender Vintage-Style Grover Rotomatic 18:1
Fretboard: Slab Rosewood Ebony
Neck Material: Maple Maple 3-pc w/ Carbon Fiber Reinforcement Rods
Decoration: White Dot Dots
Scale Size: 25.5" 25.5"
Shape: Modern C Ultra Thin C
Thickness: 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.87'' (22.1mm) 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm)
Frets: 21 Medium Jumbo Nickel Silver 24 XL Jumbo Nickel Silver
Fretboard Radius: 9.5" 14"
Nut: Synthetic Bone Locking
Nut Width: 41.9mm (1.65'') 41.3mm (1.625'')
Electronics
Bridge Pickup: Fender Seymour Duncan Invader SH8 Humbucking (Humbucker / Passive) EMG 81 (Humbucker / Active)
Middle Pickup:
Neck Pickup: EMG 85 (Humbucker / Active)
Switch: 0 Way 3 Way
Knobs: Bell Dome
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 0 1