Show Full Spec Comparison
| Fender Buddy Guy Standard Stratocaster | American Professional II Jazzmaster | |
|---|---|---|
| General | ||
| Brand: | Fender | Fender |
| Year: | 2002 | 2020 |
| Configuration: | SSS | SS |
| Strings: | 6 | 6 |
| Made in: | Mexico | United States |
| Series: | Artist | American Professional II |
| Colors: | Black Patterns | Sunburst, Blue, Green, Gray Burst |
| Left-Handed Version: | No | Yes |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Alder | Alder |
| Bridge: | 6-Saddle Vintage-Style Synchronized Tremolo | 9.5” Radius Jazzmaster/Jaguar Bridge with Panorama™ Tremolo System |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Vintage-Style | Fender® Standard Cast/Sealed Staggered |
| Fretboard: | Maple | Rosewood |
| Neck Material: | Maple | Maple |
| Decoration: | Black Dot | White Dot |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Fender Soft V | Deep C |
| Thickness: | 1st Fret: 0.9'' (22.9mm) - 12th Fret: 0.99'' (25.1mm) | 1st Fret: 0.8'' (20.3mm) - 12th Fret: 0.92'' (23.4mm) |
| Frets: | 21 Medium Jumbo Nickel Silver | 22 Narrow Tall Nickel Silver |
| Fretboard Radius: | 9.5" | 9.5" |
| Nut: | Synthetic Bone | Bone |
| Nut Width: | 42mm (1.654'') | 42.8mm (1.685'') |
| Electronics | ||
| Bridge Pickups: | Fender Standard Single-Coil Strat (Single Coil / Passive) | Fender V-Mod II Single-Coil Jazzmaster (Single Coil / Passive) |
| Middle Pickup: | Fender Standard Single-Coil Strat (Single Coil / Passive) | |
| Neck Pickup: | Fender Standard Single-Coil Strat (Single Coil / Passive) | Fender V-Mod II Single-Coil Jazzmaster (Single Coil / Passive) |
| Switch: | 5 Way | 3 Way |
| Knobs: | Bell | Bell |
| Pickup Mods: | None | S-1 Switch |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 2 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Chrome |
Show Diagrams Comparison
Reasons to Get
Fender Buddy Guy Standard Stratocaster over American Professional II Jazzmaster
Reasons to Get
Fender American Professional II Jazzmaster over Buddy Guy Standard Stratocaster
Other Key Differences
Fender Buddy Guy Standard Stratocaster vs American Professional II Jazzmaster
Shared Features
Fender Buddy Guy Standard Stratocaster vs American Professional II Jazzmaster
Common Strengths
- High-Quality Nut
- Top Pickup Brand
Common Weaknesses
- Neck-Through Build
- Weight Relief
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Buddy Guy Standard Stratocaster favors large hands more than the Fender American Professional II Jazzmaster.
Fender Buddy Guy Standard Stratocaster:
Fender American Professional II Jazzmaster:
Beginner Friendliness
The Fender American Professional II Jazzmaster meets 6 out of our 8 criteria items for beginner friendliness, while the Fender Buddy Guy Standard Stratocaster meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Fender Buddy Guy Standard Stratocaster- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Short scale
- Comfortable neck
- Locking tuners
New Player Friendliness
Fender American Professional II Jazzmaster- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Fender American Professional II Jazzmaster
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Winner: Fender American Professional II Jazzmaster.
Pickup Configuration
The Fender Buddy Guy Standard Stratocaster has an SSS configuration while the Fender American Professional II Jazzmaster has SS pickups.
SSS is perfect for players who like to play clean. The definition you get between notes and the crispiness is unmatched by most other configurations. You can still use it for distortion, but you won't get the same kind of output and power compared to a humbucker, and the hum they produce also makes them less adequate for high gain.
On the other hand, SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
Pickups Quality
Both come with some of the top pickups on the market. You can't go wrong with either of them. You'll probably never need a pickup upgrade.
You can purchase similar pickups to the Fender Buddy Guy Standard Stratocaster's and use them on any guitar:
We found the same or similar pickups to the Fender American Professional II Jazzmaster's online:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender Buddy Guy Standard Stratocaster gives you 5 switch options while the Fender American Professional II Jazzmaster gives you 3. This means that the Fender Buddy Guy Standard Stratocaster gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the Fender American Professional II Jazzmaster comes with some kind of pickup modification: S-1 Switch.
An S-1 switch can do a lot of different pickup combinations. It can split them, connect them in series, parallel, add more pickups to each position, and more. Check out the diagram to know how it affects this model.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender American Professional II Jazzmaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Buddy Guy Standard Stratocaster compares to the Fender American Professional II Jazzmaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Fender Buddy Guy Standard Stratocaster is built in Mexico while the Fender American Professional II Jazzmaster is made in United States.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Fender American Professional II Jazzmaster
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Fender Buddy Guy Standard Stratocaster has a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
On the other hand, the Fender American Professional II Jazzmaster comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Fender Buddy Guy Standard Stratocaster's are Vintage-Style while the Fender American Professional II Jazzmaster's are Fender® Standard Cast/Sealed Staggered
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Fender Buddy Guy Standard Stratocaster
- Synthetic Bone Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender American Professional II Jazzmaster
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- S-1 Switch Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Fender American Professional II Jazzmaster has the wider nut with 42.8mm (1.685'') vs 42mm (1.654''). This is a 0.8mm (0.031'') difference
This means that it will be more difficult to do bar chords on the Fender American Professional II Jazzmaster, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Fender Buddy Guy Standard Stratocaster has a V type of neck. This neck shape was more common during Fender's early years. Some people like it because they use their thumb over the edge of the fretboard to press the lower strings. It's rather thicker than most modern necks, so it's not usually used for playing fast solos.
The Fender American Professional II Jazzmaster, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Fender Buddy Guy Standard Stratocaster and the Fender American Professional II Jazzmaster have the same fretboard radius of 9.5". This is the most common radius for Stratocaster guitars. It's considered curved when compared to most other models. This allows you to play chords very easily without muting strings accidentally and gives you more space between strings for fingerpicking. However, this curve also gives the guitar less allowance for lower action. If you bend too hard at the high frets, some of your notes might get muted because the curve will make the string fret out.
Fret Size
The Fender American Professional II Jazzmaster has Narrow Tall frets, which should be taller than the Fender Buddy Guy Standard Stratocaster's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
