Show Full Spec Comparison
| Fender Ben Gibbard Mustang | Ibanez APEX30 | |
|---|---|---|
| General | ||
| Brand: | Fender | Ibanez |
| Year: | 2021 | 2020 |
| Configuration: | SS | HH |
| Strings: | 6 | 7 |
| Made in: | Mexico | Indonesia |
| Series: | Artist | APEX |
| Colors: | Natural | Gray |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Chambered Ash | Nyatoh |
| Bridge: | 6-Saddle Vintage-Style Mustang Tremolo | Evertune |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Vintage-Style with Fender Logo | Gotoh machine heads |
| Fretboard: | Maple | Ebony |
| Neck Material: | Maple | 3pc Maple |
| Decoration: | Black Dot | |
| Scale Size: | 24" | 25.5" |
| Shape: | Modern C | Wizard II-7 |
| Thickness: | 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.87'' (22.1mm) | 1st Fret: 0.75'' (19.1mm) - 12th Fret: 0.83'' (21.1mm) |
| Frets: | 22 Medium Jumbo Nickel Silver | 24 Jumbo Nickel Silver |
| Fretboard Radius: | 9.5" | 16" |
| Nut: | Synthetic Bone | Plastic |
| Nut Width: | 42mm (1.654'') | 48mm (1.89'') |
| Electronics | ||
| Bridge Pickups: | Fender Vintage-Style Single-Coil Mustang (Single Coil / Passive) | DiMarzio Blaze (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Fender Vintage-Style Single-Coil Mustang (Single Coil / Passive) | DiMarzio Blaze (Humbucker / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Bell | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 0 | 1 |
| Hardware | ||
| Strap Lock: | Yes | No |
| Hardware Color: | Chrome | Black |
Show Diagrams Comparison
Reasons to Get
Fender Ben Gibbard Mustang over Ibanez APEX30
Reasons to Get
Ibanez APEX30 over Fender Ben Gibbard Mustang
Other Key Differences
Fender Ben Gibbard Mustang vs Ibanez APEX30
Shared Features
Fender Ben Gibbard Mustang vs Ibanez APEX30
Common Strengths
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Ibanez APEX30 favors large hands more than the Fender Ben Gibbard Mustang.
Fender Ben Gibbard Mustang:
Ibanez APEX30:
Beginner Friendliness
The Fender Ben Gibbard Mustang meets 7 out of our 8 criteria items for beginner friendliness, while the Ibanez APEX30 meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Fender Ben Gibbard Mustang- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Short scale
- Comfortable neck
- Locking tuners
New Player Friendliness
Ibanez APEX30- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Fender Ben Gibbard Mustang
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Woods Used in the Ibanez APEX30
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Nyatoh has been replacing Mahogany for guitar building. It's fairly hard, durable, more sustentable and common than Mahogany. Find out more about Nyatoh.
Winner: Tie.
Pickup Configuration
The Fender Ben Gibbard Mustang has an SS configuration while the Ibanez APEX30 has HH pickups.
SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Fender Ben Gibbard Mustang has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender Ben Gibbard Mustang.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Ben Gibbard Mustang.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender Ben Gibbard Mustang compares to the Ibanez APEX30.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Fender Ben Gibbard Mustang is built in Mexico while the Ibanez APEX30 is made in Indonesia.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Fender Ben Gibbard Mustang has a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
On the other hand, the Ibanez APEX30 comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
Winner: Fender Ben Gibbard Mustang.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Fender Ben Gibbard Mustang's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
On the other hand, the Ibanez APEX30's is a Evertune. It will keep your guitar in tune and intonated until the next string swap. If you really like extremely subtle vibratos, this might not be the bridge for you because you won't be able to perform them as well. However, the fact that you won't need to tune your guitar is a huge advantage that many people will gladly pay the extra price for.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Ibanez APEX30.
Tuners
Both come with regular tuners. The Fender Ben Gibbard Mustang's are Vintage-Style with Fender Logo while the Ibanez APEX30's are Gotoh machine heads
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Fender Ben Gibbard Mustang
- Expensive Wood
- Synthetic Bone Nut
- Top Brand Pickups
- Tremolo
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Ibanez APEX30
- Expensive Wood
- Top Brand Pickups
- Stays in Tune (Evertune)
- Luminescent Inlay
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No High-Quality Nut
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Ibanez APEX30 has the wider nut with 48mm (1.89'') vs 42mm (1.654''). This is a 6mm (0.236'') difference
This means that it will be more difficult to do bar chords on the Ibanez APEX30, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Ibanez APEX30 has the longest scale: 25.5". The Fender Ben Gibbard Mustang is only 24" long. This is a 1.5'' (38.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Fender Ben Gibbard Mustang has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Ibanez APEX30, on the other hand, has a Wizard neck. This is thinner than most C-type necks. It won't get in your way if you want to play fast solos. It's not as slim as 'Super Wizard' necks, so it might fit you better if you don't like ultra-thin necks.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Ben Gibbard Mustang's fingerboard radius is smaller, which means it's more curved than the Ibanez APEX30's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Ibanez APEX30.
Fret Size
The Ibanez APEX30 has Jumbo frets, which should be taller than the Fender Ben Gibbard Mustang's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
