Show Full Spec Comparison
Fender American Original 70s Telecaster Custom | American Original 60s Stratocaster | |
---|---|---|
General | ||
Brand: | Fender | Fender |
Year: | 2018 | 2018 |
Configuration: | SH | SSS |
Strings: | 6 | 6 |
Made in: | United States | United States |
Series: | American Original | American Original |
Colors: | Sunburst, Yellow, Natural | White, Sunburst, Pink |
Left-Handed Version: | No | Yes |
Body | ||
Type: | Solid Body | Solid Body |
Body Material: | Alder | Alder |
Bridge: | 3-Saddle Vintage-Style Tele with Slotted Steel Saddles | Pure Vintage 6-Saddle Synchronized Tremolo |
Neck | ||
Neck Joint: | Bolt-On | Bolt-On |
Tuners: | Fender® Vintage F Stamped | Pure Vintage Single Line Fender Deluxe |
Fretboard: | Maple | Rosewood |
Neck Material: | Maple | Maple |
Decoration: | Black Dot | White Pearloid Dot |
Scale Size: | 25.5" | 25.5" |
Shape: | Medium C | Mid 60s C |
Thickness: | 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.9'' (22.9mm) | 1st Fret: 0.825'' (21mm) - 12th Fret: 0.975'' (24.8mm) |
Frets: | 21 Vintage Tall Nickel Silver | 21 Vintage Tall Nickel Silver |
Fretboard Radius: | 9.5" | 9.5" |
Nut: | Bone | Bone |
Nut Width: | 42mm (1.654'') | 42mm (1.654'') |
Electronics | ||
Bridge Pickups: | Fender Vintage-Style 70s Single-Coil Tele (Single Coil / Passive) | Fender Pure Vintage 65 Gray-Bottom Single-Coil Strat (Single Coil / Passive) |
Middle Pickup: | Fender Pure Vintage 65 Gray-Bottom Single-Coil Strat (Single Coil / Passive) | |
Neck Pickup: | Fender Tim Shaw Authentic CuNiFe Wide-Range Humbucking (Humbucker / Passive) | Fender Pure Vintage 65 Gray-Bottom Single-Coil Strat (Single Coil / Passive) |
Switch: | 3 Way | 5 Way |
Knobs: | Bell | Bell |
Pickup Mods: | None | None |
Volume Controls: | 2 | 1 |
Tone Controls: | 2 | 2 |
Hardware | ||
Strap Lock: | No | No |
Hardware Color: | Chrome | Chrome |
Show Diagrams Comparison
Reasons to Get
Fender American Original 70s Telecaster Custom over American Original 60s Stratocaster
Reasons to Get
Fender American Original 60s Stratocaster over American Original 70s Telecaster Custom
Other Key Differences
Fender American Original 70s Telecaster Custom vs American Original 60s Stratocaster
Shared Features
Fender American Original 70s Telecaster Custom vs American Original 60s Stratocaster
Common Strengths
- High-Quality Nut
- From a High-Quality-Standards Country
- Top Pickup Brand
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender American Original 60s Stratocaster favors large hands more than the Fender American Original 70s Telecaster Custom.
Fender American Original 70s Telecaster Custom:
Fender American Original 60s Stratocaster:
Beginner Friendliness
Both meet 6 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Fender American Original 70s Telecaster Custom- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
New Player Friendliness
Fender American Original 60s Stratocaster- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Fender American Original 60s Stratocaster
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Winner: Fender American Original 60s Stratocaster.
Pickup Configuration
The Fender American Original 70s Telecaster Custom has an SH configuration while the Fender American Original 60s Stratocaster has SSS pickups.
SH is a more versatile version of the classic telecaster (SS) configuration. The bridge pickup usually produces a bright and twangy tone, while the neck Humbucker gives you the warmer tone you'll need for more Jazzy/Bluish solos and chords.
On the other hand, SSS is perfect for players who like to play clean. The definition you get between notes and the crispiness is unmatched by most other configurations. You can still use it for distortion, but you won't get the same kind of output and power compared to a humbucker, and the hum they produce also makes them less adequate for high gain.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Fender American Original 60s Stratocaster has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
We found the same or similar pickups to the Fender American Original 60s Stratocaster's online:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender American Original 60s Stratocaster.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender American Original 60s Stratocaster gives you 5 switch options while the Fender American Original 70s Telecaster Custom gives you 3. This means that the Fender American Original 60s Stratocaster gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender American Original 60s Stratocaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Fender American Original 70s Telecaster Custom compares to the Fender American Original 60s Stratocaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Bone nuts. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Fender American Original 70s Telecaster Custom's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Fender American Original 60s Stratocaster's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Fender American Original 70s Telecaster Custom's are Fender® Vintage F Stamped while the Fender American Original 60s Stratocaster's are Pure Vintage Single Line Fender Deluxe
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Fender American Original 70s Telecaster Custom
- Made in United States
- Bone Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender American Original 60s Stratocaster
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').
This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Fender American Original 70s Telecaster Custom and the Fender American Original 60s Stratocaster have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Fender American Original 70s Telecaster Custom and the Fender American Original 60s Stratocaster have the same fretboard radius of 9.5". This is the most common radius for Stratocaster guitars. It's considered curved when compared to most other models. This allows you to play chords very easily without muting strings accidentally and gives you more space between strings for fingerpicking. However, this curve also gives the guitar less allowance for lower action. If you bend too hard at the high frets, some of your notes might get muted because the curve will make the string fret out.
Fret Size
Both have a Vintage Tall fret size. This is a confusing name for a fret size because vintage frets are known for being short. However, this size usually means that the crown width is narrower than most modern frets, but the height is a bit taller than the usual vintage fret. You should feel the fretboard when playing with these frets, but they're not as hard to press as real vintage frets.