Show Full Spec Comparison
| Epiphone Songmaker DR-212 | Fender CD-140SCE | |
|---|---|---|
| General | ||
| Brand: | Epiphone | Fender |
| Year: | 2014 | 2016 |
| Strings: | 12 | 6 |
| Made in: | China | Indonesia |
| Series: | Original Acoustic | Classic Design |
| Colors: | Natural | Natural |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Hollowbody | Hollowbody |
| Body Material: | Select Spruce | Solid Spruce |
| Sides Material: | Mahogany | Ovangkol |
| Back Material: | Mahogany | Ovangkol |
| Bridge: | Pau Ferro | Walnut |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Epiphone Deluxe | Chrome Die-Cast |
| Fretboard: | Rosewood | Walnut |
| Neck Material: | Mahogany | Mahogany |
| Decoration: | Dots | 3mm Pearloid Dot |
| Scale Size: | 25.5" | 25.3" |
| Shape: | Acoustic C | Acoustic Fender 'Easy-to-Play' shape with rolled fretboard edges |
| Frets: | 20 Medium Jumbo Nickel Silver | 20 Vintage Nickel Silver |
| Fretboard Radius: | 12" | 12" |
| Nut: | Plastic | NuBone |
| Nut Width: | 48.5mm (1.909'') | 43mm (1.693'') |
| Electronics | ||
| Pickups: | Fishman CD-1 Preamp (Preamp / Passive) | |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Nickel | Chrome |
Reasons to Get
Epiphone Songmaker DR-212 over Fender CD-140SCE
Reasons to Get
Fender CD-140SCE over Epiphone Songmaker DR-212
Other Key Differences
Epiphone Songmaker DR-212 vs Fender CD-140SCE
Shared Features
Epiphone Songmaker DR-212 vs Fender CD-140SCE
Common Strengths
- Expensive Wood
Common Weaknesses
- Solid Side Wood
- Solid Back Wood
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Epiphone Songmaker DR-212 favors large hands more than the Fender CD-140SCE.
Epiphone Songmaker DR-212:
Fender CD-140SCE:
Beginner Friendliness
The Epiphone Songmaker DR-212 meets 3 out of our 8 criteria items for beginner friendliness, while the Fender CD-140SCE meets only 2. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Epiphone Songmaker DR-212- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
New Player Friendliness
Fender CD-140SCE- Easy-to-use bridge
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Tall frets
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Woods Used in the Epiphone Songmaker DR-212
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Fender CD-140SCE
It's a hard wood with a chocolate color that is often used to give an elegant finish. Since it's quite expensive and rare, it's mostly used for guitar tops. Find out more about Walnut.
Ovangkol is a beautiful wood that's popular for acoustic guitars. Its tone sits somewhere between rosewood and mahogany, meaning it has a punchy low-end and nice mid-range. Find out more about Ovangkol.
Winner: Epiphone Songmaker DR-212.
Electronics
The Fender CD-140SCE comes with a preamp that allows you to connect it to an amp, unlike its competitor. This allows it to have more versatility and sound quality if you want to record with it or play live.
Winner:Fender CD-140SCE.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Epiphone Songmaker DR-212 compares to the Fender CD-140SCE.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Epiphone Songmaker DR-212 is built in China while the Fender CD-140SCE is made in Indonesia.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Fender CD-140SCE
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Epiphone Songmaker DR-212 has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
On the other hand, the Fender CD-140SCE comes with a NuBone nut. It's made by the same company that makes TUSQ nuts. It's slightly softer but hard enough to give you a brighter sound when playing open strings. It's also self-lubricating, so it's good for tuning stability.
Winner: Fender CD-140SCE.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Epiphone Songmaker DR-212's are Epiphone Deluxe while the Fender CD-140SCE's are Chrome Die-Cast
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Epiphone Songmaker DR-212
- Expensive Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No High-Quality Nut
- No Top Brand Pickups
- No Electronics
- Low-Quality Material Saddle
- Laminated Top Wood
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender CD-140SCE
- Expensive Wood
- NuBone Nut
- Top Brand Pickups
- Electronics
- NuBone Saddle
- Solid Top Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Epiphone Songmaker DR-212 has the wider nut with 48.5mm (1.909'') vs 43mm (1.693''). This is a 5.5mm (0.216'') difference
This means that it will be more difficult to do bar chords on the Epiphone Songmaker DR-212, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Epiphone Songmaker DR-212 has the longest scale: 25.5". The Fender CD-140SCE is only 25.3" long. This is a 0.2'' (5.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Epiphone Songmaker DR-212 and the Fender CD-140SCE have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Epiphone Songmaker DR-212 and the Fender CD-140SCE have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.
Fret Size
The Epiphone Songmaker DR-212 has Medium Jumbo frets, which should be taller than the Fender CD-140SCE's Vintage frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
