Swap
Swap
Epiphone 1963 Firebird V
Cort X300
VS
Playability
75
Sound
72
Build
67
Value
66
Score
71
FIND IT ON:
Reverb logoSweetwater logo
Playability
70
Sound
77
Build
57
Value
78
Score
68
FIND IT ON:
Reverb logo
Add to Compare
Discuss or ask a question
Add to Compare
Discuss or ask a question
Side to side spec comparison >

Epiphone 1963 Firebird V vs Cort X300

Reasons to Get
Epiphone 1963 Firebird V over Cort X300

Release Year
2024 vs 2019
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Neck Profile
1963 Firebird vs D
Comfortable neck that works for most people
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Volume Knobs
2 vs 1
More volume control
Tone Knobs
2 vs 1
More tone control
Nut Width
1.693'' (43mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Tremolo vs Floyd Rose
Simple vibratos without too much maintenance
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
12'' (304.8mm) vs 15.75'' (400.1mm)
Easier to play chords without muting strings
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Reasons to Get
Cort X300 over Epiphone 1963 Firebird V

Country of Manufacturing
Indonesia vs China
Built with higher quality standards
Neck Profile
D vs 1963 Firebird
Thin and flat neck for playing fast
Number of Frets
24 vs 22
Allows to reach higher notes
Nut Width
1.688'' (42.9mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Bridge
Floyd Rose vs Tremolo
Allows intense vibratos and techniques like Dive Bombs
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone
Fretboard Radius
15.75'' (400.1mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend
Pickups Power
Active vs Passive
More output
Value Score
78 vs 66
Better price/quality relationship

Other Key Differences
Epiphone 1963 Firebird V vs Cort X300

Bridge Pickup
Gibson USA Firebird Mini Humbucker with Alnico 5 Magnet vs EMG Retro Active Hot 70
Different Bridge Pickup
Neck Pickup
Gibson USA Firebird Mini Humbucker with Alnico 5 Magnet vs EMG Retro Active Hot 70
Different Neck Pickup
Body Wood
Other vs Basswood
Different Body Wood
Neck Wood
Mahogany vs Maple
Different Neck Wood
Fretboard Wood
Laurel vs Rosewood
Different Fretboard Wood
Nut Material
Ivory Tusq vs Locking
Different Nut Material

Shared Features
Epiphone 1963 Firebird V vs Cort X300

Headstock
6
Same Headstock
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Pickups
HH
High output without hum
Paint Finish
Poly
Resistant paint that ages well
Type of Frets
Medium Jumbo vs Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better for Beginners?

The Epiphone 1963 Firebird V meets 4 out of our 8 criteria items for beginner friendliness, while the Cort X300 meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Epiphone 1963 Firebird V
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

New Player Friendliness

Cort X300
  • Comfortable shape
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Epiphone 1963 Firebird V

Mahogany wood pattern used for guitar building
Mahogany
Laurel wood pattern used for guitar building
Laurel

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.

Woods Used in the Cort X300

Maple wood pattern used for guitar building
Maple
Rosewood wood pattern used for guitar building
Rosewood
Basswood wood pattern used for guitar building
Basswood

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Epiphone 1963 Firebird V has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

We found the same or similar pickups to the Cort X300's online:

The Epiphone 1963 Firebird V's pickups are Passive while the Cort X300's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Epiphone 1963 Firebird V.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

They both share the following switching options:

Epiphone 1963 Firebird V and Cort X300 pickups switch and push knobs diagram
Epiphone 1963 Firebird V and Cort X300's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Cort X300.

Final Sound Quality Scores

Epiphone 1963 Firebird V
Pickups 90
Sustain 70
Versatility 63
Tuning Stability 65
Sound 72
Cort X300
Pickups 85
Sustain 75
Versatility 64
Tuning Stability 85
Sound 77

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Epiphone 1963 Firebird V compares to the Cort X300.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Epiphone 1963 Firebird V is built in China while the Cort X300 is made in Indonesia.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Cort X300

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Epiphone 1963 Firebird V has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

On the other hand, the Cort X300 comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Epiphone 1963 Firebird V's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the Cort X300's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Cort X300.

Tuners

Both come with regular tuners. The Epiphone 1963 Firebird V's are Kluson "Banjo-style" Planetary while the Cort X300's are Die-Cast

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Epiphone 1963 Firebird V has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Cort X300 comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Epiphone 1963 Firebird V.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Epiphone 1963 Firebird V
  • Expensive Wood
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Cort X300
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Tremolo
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Epiphone 1963 Firebird V
Quality of materials 66
Features 65
Quality Control 70
Build Quality 67
Cort X300
Quality of materials 41
Features 65
Quality Control 65
Build Quality 57

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Epiphone 1963 Firebird V Nut Width
Epiphone 1963 Firebird V Nut Width
Cort X300 Nut Width
Cort X300 Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Epiphone 1963 Firebird V has the wider nut with 43mm (1.693'') vs 42.9mm (1.688''). This is a 0.1mm (0.0050000000000001'') difference

This means that it will be more difficult to do bar chords on the Epiphone 1963 Firebird V, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Epiphone 1963 Firebird V's Scale Length
Epiphone 1963 Firebird V's Scale Length
Cort X300's Scale Length
Cort X300's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Cort X300 has the longest scale: 25.5". The Epiphone 1963 Firebird V is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Epiphone 1963 Firebird V Neck Profile
Epiphone 1963 Firebird V's neck profile
Cort X300 Neck Profile
Cort X300's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Epiphone 1963 Firebird V has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

The Cort X300, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

Fretboard Radius

Epiphone 1963 Firebird V Fingerboard Radius
Epiphone 1963 Firebird V's Fingerboard radius
Cort X300 Fingerboard Radius
Cort X300's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Epiphone 1963 Firebird V's fingerboard radius is smaller, which means it's more curved than the Cort X300's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Cort X300.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Epiphone 1963 Firebird V:
Big Hands
Small Hands
Cort X300:
Big Hands
Small Hands

Fret Size

Epiphone 1963 Firebird V Frets Size
Epiphone 1963 Firebird V's Frets Size
Cort X300 Frets Size
Cort X300's Frets Size

The Epiphone 1963 Firebird V has Medium Jumbo frets, which should be taller than the Cort X300's Medium frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Epiphone 1963 Firebird V
Bending & Vibrato Ease 80
Chord Playability 65
Solo Playability 80
Playability 75
Cort X300
Bending & Vibrato Ease 70
Chord Playability 60
Solo Playability 80
Playability 70

Specs Side-by-Side

Epiphone 1963 Firebird V vs Cort X300
General Epiphone 1963 Firebird V Cort X300
Brand: Epiphone Cort
Year: 2024 2019
Configuration: HH HH
Strings: 6 6
Made in: China Indonesia
Series: 1963 Firebird V X
Colors: Blue, Red Blue, Purple
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: 9-ply Mahogany/Walnut Neck-Through Basswood
Bridge: Maestro Vibrola FloydRose Special Tremolo
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Kluson "Banjo-style" Planetary Die-Cast
Fretboard: Indian Laurel Rosewood
Neck Material: Mahogany Hard Maple
Decoration: Mother of Pearl Trapezoid White Dots
Scale Size: 24.75" 25.5"
Shape: 1963 Firebird D
Frets: 22 Medium Jumbo Nickel Silver 24 Medium Nickel Silver
Fretboard Radius: 12" 15.75"
Nut: Ivory Tusq Locking
Nut Width: 43mm (1.693'') 42.9mm (1.688'')
Electronics
Bridge Pickup: Gibson USA Firebird Mini Humbucker with Alnico 5 Magnet (Humbucker / Passive) EMG Retro Active Hot 70 (Humbucker / Active)
Middle Pickup:
Neck Pickup: Gibson USA Firebird Mini Humbucker with Alnico 5 Magnet (Humbucker / Passive) EMG Retro Active Hot 70 (Humbucker / Active)
Switch: 3 Way 3 Way
Knobs: Bell Dome
Pickup Mods: None None
Volume Controls: 2 1
Tone Controls: 2 1