Swap
Swap
ESP Snapper 7
PRS Custom 24
VS
Playability
73
Sound
83
Build
79
Value
63
Score
78
FIND IT ON:
Sweetwater logo
Playability
72
Sound
73
Build
72
Value
57
Score
72
FIND IT ON:
Sweetwater logo
Add more to comparison

ESP Snapper 7 vs PRS Custom 24

Reasons to Get
ESP Snapper 7 over PRS Custom 24

Release Year
2022 vs 2011
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Neck Profile
Thin U vs Pattern Thin
Comfortable neck with more grip
Pickup Mods
Multiple vs None
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Strings
7 vs 6
Allows you to play lower notes
Pickups
HSS vs HH
High output with beautiful cleans and tone versatility
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.83'' (21.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.9'' (22.9mm)
More comfortable at higher frets for small hands
Nut Width
1.811'' (46mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Scale Length
25.5'' (647.7mm) vs 25'' (635mm)
Lower action and brighter natural tone
Fretboard Radius
12'' (304.8mm) vs 10'' (254mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
63 vs 57
Better price/quality relationship

Reasons to Get
PRS Custom 24 over ESP Snapper 7

Decorative Top
Carved Figured Maple vs None
Finished with beautiful natural wood patterns
Type of Frets
Medium Jumbo vs Jumbo
You'll feel the fretboard when pressing down the strings
Neck Profile
Pattern Thin vs Thin U
Comfortable neck that works for most people
Strings
6 vs 7
Narrower neck and fewer strings to change
Pickups
HH vs HSS
High output without hum
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.83'' (21.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.9'' (22.9mm) vs 0.866'' (22mm)
More comfortable at higher frets for big hands
Nut Width
1.688'' (42.9mm) vs 1.811'' (46mm)
Favors small hands, easier bar chords and other shapes
Scale Length
25'' (635mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
10'' (254mm) vs 12'' (304.8mm)
More curved fretboard helpful to play chords without muting strings

Other Key Differences
ESP Snapper 7 vs PRS Custom 24

Bridge Pickup
Seymour Duncan SH-14-7 vs PRS 85/15
Different Bridge Pickup
Neck Pickup
Seymour Duncan SSL-5-7 vs PRS 85/15
Different Neck Pickup
Body Wood
Alder vs Mahogany
Different Body Wood
Neck Wood
Maple vs Mahogany
Different Neck Wood
Headstock
7 vs 3-3
Different Headstock
Nut Material
Bone vs PRS Propietary
Different Nut Material

Shared Features
ESP Snapper 7 vs PRS Custom 24

Fretboard Wood
Rosewood
Same Fretboard Wood
Body Type
Solid Body
Feedback free
Switch Positions
5
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Paint Finish
Poly
Resistant paint that ages well
Bridge
Tremolo
Simple vibratos without too much maintenance
Pickups Power
Passive
Cleaner sound and no battery needed

Common Strengths

  • Locking Tuners
  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

ESP Snapper 7 Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP Snapper 7 is probably the better product overall with its final score of 78 compared to the PRS Custom 24's 72 score, although not by a lot.

The ESP Snapper 7 wins when it comes to sound, playability, build quality, value for the money. This means that it wins over the PRS Custom 24 in every aspect.

If you got small hands, you'll probably feel more comfortable playing the ESP Snapper 7.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the ESP Snapper 7 is the better choice.

The ESP Snapper 7 meets 6 out of our 8 criteria items for beginner friendliness, while the PRS Custom 24 meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

ESP Snapper 7
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

New Player Friendliness

PRS Custom 24
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP Snapper 7 Overview

  • From ESP's 2022 Snapper series
  • Made in Japan
  • 7 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Alder body
  • Maple neck
  • Honduras Rosewood fretboard
  • Bridge pickup: Seymour Duncan SH-14-7 (Humbucker/Passive)
  • Middle pickup: Seymour Duncan SSL-5-7 (Single Coil/Passive)
  • Neck pickup: Seymour Duncan SSL-5-7 (Single Coil/Passive)
  • 1 volume and 1 tone Bell knobs
  • 5-way Switch
  • ESP Flicker-III bridge
  • Thin U Bolt-On neck
  • 22 Jumbo frets
  • Gotoh Locking tuners
  • Compare Specs >

PRS Custom 24 Overview

  • From PRS's 2011 Core series
  • Made in United States
  • 6 strings
  • 25"'' scale
  • 10" Fretboard Radius
  • Carved Figured Maple top
  • Mahogany body
  • Mahogany neck
  • Rosewood fretboard
  • Bridge pickup: PRS 85/15 (Humbucker/Passive)
  • Neck pickup: PRS 85/15 (Humbucker/Passive)
  • 1 volume and 1 tone Speed knobs
  • 5-way Switch
  • PRS Patented Tremolo, Gen III bridge
  • Pattern Thin Set neck
  • 24 Medium Jumbo frets
  • PRS Phase III Locking tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Rosewood wood pattern used for guitar building
Rosewood

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the ESP Snapper 7

Maple wood pattern used for guitar building
Maple
Alder wood pattern used for guitar building
Alder

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the PRS Custom 24

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Winner: PRS Custom 24.

Pickup Configuration

The ESP Snapper 7 has an HSS configuration while the PRS Custom 24 has HH pickups.

HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the ESP Snapper 7 has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: ESP Snapper 7.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the ESP Snapper 7 comes with some kind of pickup modification: Coil Split, Capacitance Selector.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

A Capacitor is what lets you change the tone of a guitar through the tone knob. With a capacitor selector, you'll be able to choose between multiple capacitors that can give you a warmer or brighter tone.

ESP Snapper 7 pickups switch selector and push knobs diagram
ESP Snapper 7's switch options
PRS Custom 24 pickups switch selector and push knobs diagram
PRS Custom 24's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: ESP Snapper 7.

Final Sound Quality Scores

ESP Snapper 7
Pickups 90
Sustain 80
Versatility 85
Tuning Stability 75
Sound 83
PRS Custom 24
Pickups 85
Sustain 65
Versatility 67
Tuning Stability 75
Sound 73

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP Snapper 7 compares to the PRS Custom 24.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The ESP Snapper 7 is built in Japan while the PRS Custom 24 is made in United States.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The ESP Snapper 7 has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the PRS Custom 24 comes with a PRS Propietary nut. It's similar to TUSQ nuts, but they're not as hard, and the tone is not as bright. However, the material is self-lubricating, and it's usually well cut, so they have good tuning stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The ESP Snapper 7 has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the PRS Custom 24 comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: ESP Snapper 7.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP Snapper 7
  • Locking Tuners
  • Made in Japan
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Coil Split, Capacitance Selector Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
PRS Custom 24
  • Locking Tuners
  • Made in United States
  • Expensive Wood
  • PRS Propietary Nut
  • Top Brand Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP Snapper 7
Quality of materials 66
Features 70
Quality Control 100
Build Quality 79
PRS Custom 24
Quality of materials 50
Features 65
Quality Control 100
Build Quality 72

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP Snapper 7 Nut Width
ESP Snapper 7 Nut Width
PRS Custom 24 Nut Width
PRS Custom 24 Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the ESP Snapper 7 has the wider nut with 46mm (1.811'') vs 42.9mm (1.688''). This is a 3.1mm (0.123'') difference

This means that it will be more difficult to do bar chords on the ESP Snapper 7, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

ESP Snapper 7's Scale Length
ESP Snapper 7's Scale Length
PRS Custom 24's Scale Length
PRS Custom 24's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The ESP Snapper 7 has the longest scale: 25.5". The PRS Custom 24 is only 25" long. This is a 0.5'' (12.7mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP Snapper 7 Neck Profile
ESP Snapper 7's neck profile
PRS Custom 24 Neck Profile
PRS Custom 24's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The ESP Snapper 7 has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The PRS Custom 24, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

ESP Snapper 7 Fingerboard Radius
ESP Snapper 7's Fingerboard radius
PRS Custom 24 Fingerboard Radius
PRS Custom 24's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the PRS Custom 24's fingerboard radius is smaller, which means it's more curved than the ESP Snapper 7's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the ESP Snapper 7.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the PRS Custom 24 favors large hands more than the ESP Snapper 7.

ESP Snapper 7:
Big Hands
Small Hands
PRS Custom 24:
Big Hands
Small Hands

Fret Size

ESP Snapper 7 Frets Size
ESP Snapper 7's Frets Size
PRS Custom 24 Frets Size
PRS Custom 24's Frets Size

The ESP Snapper 7 has Jumbo frets, which should be taller than the PRS Custom 24's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

ESP Snapper 7
Bending & Vibrato Ease 80
Chord Playability 70
Solo Playability 70
Playability 73
PRS Custom 24
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 75
Playability 72

Specs Side-by-Side

ESP Snapper 7 vs PRS Custom 24
General ESP Snapper 7 PRS Custom 24
Brand: ESP PRS
Year: 2022 2011
Configuration: HSS HH
Strings: 7 6
Made in: Japan United States
Series: Snapper Core
Colors: Black, Green, Brown, Red Gold, White, Black, Blue, Green, Black Burst, Orange, Purple, Yellow, Red Burst, Gold Burst, Dark Cherry Sunburst, McCarty Sunburst, McCarty Tobacco Sunburst
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Alder Mahogany
Bridge: ESP Flicker-III PRS Patented Tremolo, Gen III
Neck
Neck Joint: Bolt-On Set
Tuners: Gotoh Locking PRS Phase III Locking
Fretboard: Honduras Rosewood Rosewood
Neck Material: Maple Mahogany
Decoration: Dots Birds
Scale Size: 25.5" 25"
Shape: Thin U Pattern Thin
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: 0.83'' (21.1mm) - 12th Fret: 0.9'' (22.9mm)
Frets: 22 Jumbo Nickel Silver 24 Medium Jumbo Nickel Silver
Fretboard Radius: 12" 10"
Nut: Bone PRS Propietary
Nut Width: 46mm (1.811'') 42.9mm (1.688'')
Electronics
Bridge Pickup: Seymour Duncan SH-14-7 (Humbucker / Passive) PRS 85/15 (Humbucker / Passive)
Middle Pickup: Seymour Duncan SSL-5-7 (Single Coil / Passive)
Neck Pickup: Seymour Duncan SSL-5-7 (Single Coil / Passive) PRS 85/15 (Humbucker / Passive)
Switch: 5 Way 5 Way
Knobs: Bell Speed
Pickup Mods: Coil Split, Capacitance Selector None
Volume Controls: 1 1
Tone Controls: 1 1