Swap
Swap
ESP LTD SN-1007HT Baritone
Schecter C-7 Deluxe
VS
Playability
75
Sound
80
Build
79
Value
78
Score
78
FIND IT ON:
Sweetwater logoReverb logo
Playability
75
Sound
66
Build
52
Value
74
Score
64
FIND IT ON:
Reverb logoAmazon logoMusician's Friend logoSweetwater logo
Add to Compare
Add to Compare
Side to side spec comparison >

LTD SN-1007HT Baritone vs Schecter C-7 Deluxe

Reasons to Get
LTD SN-1007HT Baritone over Schecter C-7 Deluxe

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2022 vs 2015
From a more recent year
Compound Radius
12" to 16" vs 16"
Balanced playability for chords and single-notes
Neck Profile
Thin U vs Thin C
Comfortable neck with more grip
Pickups Brand
Fishman vs None
Pickups from a renown brand
Nut Material
Bone vs Graphite
Good quality nut with rich tone
Pickup Mods
Multi-Voicing vs None
Changes the voice (tones or gain) of the pickups
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Scale Length
27'' (685.8mm) vs 26.5'' (673.1mm)
Lower action and brighter natural tone
Pickups Power
Active vs Passive
More output
Value Score
78 vs 74
Better price/quality relationship

Reasons to Get
Schecter C-7 Deluxe over ESP LTD SN-1007HT Baritone

Neck Profile
Thin C vs Thin U
Comfortable neck that works for most people
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.866'' (22mm)
More comfortable at higher frets for big hands
Scale Length
26.5'' (673.1mm) vs 27'' (685.8mm)
Easier bending, shorter fret separation and warmer natural tone
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Other Key Differences
LTD SN-1007HT Baritone vs Schecter C-7 Deluxe

Bridge Pickup
Fishman Fluence Modern Ceramic vs Schecter Diamond Plus
Different Bridge Pickup
Neck Pickup
Fishman Fluence Modern Alnico vs Schecter Diamond Plus
Different Neck Pickup
Body Wood
Ash vs Basswood
Different Body Wood
Neck Wood
Roasted Maple vs Maple
Different Neck Wood
Fretboard Wood
Ebony vs Rosewood
Different Fretboard Wood
Headstock
7 vs 3-4
Different Headstock
Nut Material
Bone vs Graphite
Different Nut Material

Shared Features
LTD SN-1007HT Baritone vs Schecter C-7 Deluxe

Strings
7
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Nut Width
1.89'' (48mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Neck Joint
Bolt-On
Allows you to detach and swap the neck
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

ESP LTD SN-1007HT Baritone Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP LTD SN-1007HT Baritone is probably the better product overall with its final score of 78 compared to the Schecter C-7 Deluxe's 64 score, which is a significant difference.

The ESP LTD SN-1007HT Baritone wins when it comes to sound, build quality, value for the money. On the other hand, the Schecter C-7 Deluxe has the upper hand when it comes to.

If you got small hands, you'll probably feel that the Schecter C-7 Deluxe is easier to play.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the ESP LTD SN-1007HT Baritone is the better choice.

The ESP LTD SN-1007HT Baritone meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter C-7 Deluxe meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

ESP LTD SN-1007HT Baritone
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Narrow nut
  • Short scale

New Player Friendliness

Schecter C-7 Deluxe
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP LTD SN-1007HT Baritone Overview

  • From ESP LTD's 2022 SN series
  • Made in Indonesia
  • 7 strings
  • 27"'' scale
  • 12" to 16" Fretboard Radius
  • Swamp Ash body
  • 5Pc Roasted Maple/Purple Heart neck
  • Macassar Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Hipshot w/ String Thru bridge
  • Thin U Bolt-On neck
  • 24 XL Jumbo Stainless Steel frets
  • LTD Locking tuners
  • Compare Specs >

Schecter C-7 Deluxe Overview

  • From Schecter's 2015 C-6 Plus/Deluxe series
  • Made in Indonesia
  • 7 strings
  • 26.5"'' scale
  • 16" Fretboard Radius
  • Basswood body
  • Maple neck
  • Rosewood fretboard
  • Bridge pickup: Schecter Diamond Plus (Humbucker/Passive)
  • Neck pickup: Schecter Diamond Plus (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Tune-O-Matic w/ String Thru Body bridge
  • Thin C Bolt-On neck
  • 24 XL Jumbo frets
  • Schecter tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the ESP LTD SN-1007HT Baritone

Roasted Maple wood pattern used for guitar building
Roasted Maple
Ebony wood pattern used for guitar building
Ebony
Ash wood pattern used for guitar building
Ash

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Woods Used in the Schecter C-7 Deluxe

Maple wood pattern used for guitar building
Maple
Rosewood wood pattern used for guitar building
Rosewood
Basswood wood pattern used for guitar building
Basswood

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Winner: ESP LTD SN-1007HT Baritone.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The ESP LTD SN-1007HT Baritone has pickups from a more specialized brand than the Schecter C-7 Deluxe. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.

You can purchase similar pickups to the ESP LTD SN-1007HT Baritone's and use them on any guitar:

The ESP LTD SN-1007HT Baritone's pickups are Active while the Schecter C-7 Deluxe's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: ESP LTD SN-1007HT Baritone.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the ESP LTD SN-1007HT Baritone comes with some kind of pickup modification: Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

ESP LTD SN-1007HT Baritone pickups switch and push knobs diagram
ESP LTD SN-1007HT Baritone's switch options
Schecter C-7 Deluxe pickups switch and push knobs diagram
Schecter C-7 Deluxe's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: ESP LTD SN-1007HT Baritone.

Final Sound Quality Scores

ESP LTD SN-1007HT Baritone
Pickups 85
Sustain 90
Versatility 64
Tuning Stability 80
Sound 80
Schecter C-7 Deluxe
Pickups 55
Sustain 80
Versatility 59
Tuning Stability 70
Sound 66

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP LTD SN-1007HT Baritone compares to the Schecter C-7 Deluxe.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The ESP LTD SN-1007HT Baritone has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Schecter C-7 Deluxe comes with a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.

Winner: ESP LTD SN-1007HT Baritone.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the ESP LTD SN-1007HT Baritone is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: ESP LTD SN-1007HT Baritone.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The ESP LTD SN-1007HT Baritone has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: ESP LTD SN-1007HT Baritone.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP LTD SN-1007HT Baritone
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Multi-Voicing Pickups
  • Compound Radius Fretboard
  • Made in Indonesia
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter C-7 Deluxe
  • Expensive Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP LTD SN-1007HT Baritone
Quality of materials 86
Features 75
Quality Control 75
Build Quality 79
Schecter C-7 Deluxe
Quality of materials 41
Features 50
Quality Control 65
Build Quality 52

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP LTD SN-1007HT Baritone Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 48mm (1.89'').

This is considered a wide width for a 7-string guitar. It gives your fingers the extra space you need to play without muting accidentally, but this also makes bar chords harder to perform, especially if you have small hands.

Scale Length

ESP LTD SN-1007HT Baritone's Scale Length
ESP LTD SN-1007HT Baritone's Scale Length
Schecter C-7 Deluxe's Scale Length
Schecter C-7 Deluxe's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The ESP LTD SN-1007HT Baritone has the longest scale: 27". The Schecter C-7 Deluxe is only 26.5" long. This is a 0.5'' (12.7mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP LTD SN-1007HT Baritone Neck Profile
ESP LTD SN-1007HT Baritone's neck profile
Schecter C-7 Deluxe Neck Profile
Schecter C-7 Deluxe's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The ESP LTD SN-1007HT Baritone has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The Schecter C-7 Deluxe, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

ESP LTD SN-1007HT Baritone Fretboard Compound Radius
ESP LTD SN-1007HT Baritone's Compound Fretboard Radius
Schecter C-7 Deluxe Fingerboard Radius
Schecter C-7 Deluxe's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the ESP LTD SN-1007HT Baritone is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the ESP LTD SN-1007HT Baritone favors large hands more than the Schecter C-7 Deluxe.

ESP LTD SN-1007HT Baritone:
Big Hands
Small Hands
Schecter C-7 Deluxe:
Big Hands
Small Hands

Fret Size

ESP LTD SN-1007HT Baritone and Schecter C-7 Deluxe Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

ESP LTD SN-1007HT Baritone
Bending & Vibrato Ease 75
Chord Playability 70
Solo Playability 80
Playability 75
Schecter C-7 Deluxe
Bending & Vibrato Ease 85
Chord Playability 50
Solo Playability 90
Playability 75

Specs Side-by-Side

LTD SN-1007HT Baritone vs Schecter C-7 Deluxe
General LTD SN-1007HT Baritone Schecter C-7 Deluxe
Brand: ESP LTD Schecter
Year: 2022 2015
Configuration: HH HH
Strings: 7 7
Made in: Indonesia Indonesia
Series: SN C-6 Plus/Deluxe
Colors: Black White, Black
Left-Handed Version: Yes Yes
Body
Type: Solid Body Solid Body
Body Material: Swamp Ash Basswood
Bridge: Hipshot w/ String Thru Tune-O-Matic w/ String Thru Body
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: LTD Locking Schecter
Fretboard: Macassar Ebony Rosewood
Neck Material: 5Pc Roasted Maple/Purple Heart Maple
Decoration: Dots 4mm Dots
Scale Size: 27" 26.5"
Shape: Thin U Thin C
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 24 XL Jumbo Stainless Steel 24 XL Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 16"
Nut: Bone Graphite
Nut Width: 48mm (1.89'') 48mm (1.89'')
Electronics
Bridge Pickup: Fishman Fluence Modern Ceramic (Humbucker / Active) Schecter Diamond Plus (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Fishman Fluence Modern Alnico (Humbucker / Active) Schecter Diamond Plus (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: Multi-Voicing None
Volume Controls: 1 1
Tone Controls: 1 1