Swap
Swap
ESP LTD PS-1000
Schecter Robin Zander Corsair
VS
Playability
80
Sound
75
Build
69
Value
75
Score
75
FIND IT ON:
Sweetwater logo
Playability
75
Sound
70
Build
69
Value
66
Score
71
FIND IT ON:
Amazon logoSweetwater logo
Add more to comparison

LTD PS-1000 vs Schecter Robin Zander Corsair

Reasons to Get
LTD PS-1000 over Schecter Robin Zander Corsair

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium
You won't feel the fretboard when pressing down the strings
Neck Profile
Thin U vs Thin C
Comfortable neck with more grip
Body Type
Semi-Hollow vs Hollowbody
Lighter and allows more gain than a hollowbody
Volume Knobs
2 vs 1
More volume control
Tone Knobs
2 vs 1
More tone control
Pickups
P90P90 vs HH
Vintage tone with decent versatility
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Bridge
Fixed vs Bigsby Tremolo
Good sustain and needs no set-up
Fretboard Radius
13.78'' (350mm) vs 14'' (355.6mm)
More curved fretboard helpful to play chords without muting strings
Value Score
75 vs 66
Better price/quality relationship

Reasons to Get
Schecter Robin Zander Corsair over ESP LTD PS-1000

Type of Frets
Medium vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Neck Profile
Thin C vs Thin U
Comfortable neck that works for most people
Nut Material
Ivory Tusq vs Plastic
Resistant, good tuning stability and rich tone
Body Type
Hollowbody vs Semi-Hollow
Warm tone, lighter and acoustic sound
Pickups
HH vs P90P90
High output without hum
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.866'' (22mm)
More comfortable at higher frets for big hands
Bridge
Bigsby Tremolo vs Fixed
Intense vibrato with a solid arm
Fretboard Radius
14'' (355.6mm) vs 13.78'' (350mm)
Flatter fretboard makes it easier to play single notes and bend

Other Key Differences
LTD PS-1000 vs Schecter Robin Zander Corsair

Body Wood
Mahogany vs Maple
Different Body Wood
Neck Wood
Maple vs Mahogany
Different Neck Wood
Nut Material
Plastic vs Ivory Tusq
Different Nut Material

Shared Features
LTD PS-1000 vs Schecter Robin Zander Corsair

Bridge Pickup
Seymour Duncan Phat Cat SPH90-1
Same Bridge Pickup
Neck Pickup
Seymour Duncan Phat Cat SPH90-1
Same Neck Pickup
Fretboard Wood
Ebony
Same Fretboard Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Switch Positions
3
Same pickups versatility
Number of Frets
22
Same maximum octave
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Scale Length
24.75'' (628.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Joint
Set
Neck is glued to the body

Common Strengths

  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP LTD PS-1000 is probably the better product overall with its final score of 75 compared to the Schecter Robin Zander Corsair's 71 score, although not by a lot.

The ESP LTD PS-1000 wins when it comes to sound, playability, value for the money. On the other hand, the Schecter Robin Zander Corsair has the upper hand when it comes to.

If you got small hands, you'll probably feel that the Schecter Robin Zander Corsair is easier to play.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the ESP LTD PS-1000 is the better choice.

The ESP LTD PS-1000 meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter Robin Zander Corsair meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

ESP LTD PS-1000
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

New Player Friendliness

Schecter Robin Zander Corsair
  • Comfortable shape
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP LTD PS-1000 Overview

  • From ESP LTD's 2019 Xtone series
  • Made in Indonesia
  • 6 strings
  • 24.75"'' scale
  • 13.78" Fretboard Radius
  • Mahogany body
  • 3pc Maple neck
  • Macassar Ebony fretboard
  • Bridge pickup: Seymour Duncan Phat Cat SPH90-1 (Humbucker/Passive)
  • 2 volume and 2 tone Speed knobs
  • 3-way Switch
  • Tonepros Locking TOM & Tailpiece bridge
  • Thin U Set neck
  • 22 XL Jumbo Stainless Steel frets
  • LTD Locking tuners
  • Compare Specs >

Schecter Robin Zander Corsair Overview

  • From Schecter's 2019 Artist series
  • Robin Zander Signature
  • Made in South Korea
  • 6 strings
  • 24.75"'' scale
  • 14" Fretboard Radius
  • Maple body
  • Mahogany 3-pc neck
  • Ebony fretboard
  • Bridge pickup: Seymour Duncan Phat Cat SPH90-1 (Humbucker/Passive)
  • Neck pickup: Seymour Duncan Phat Cat SPH90-1 (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Bigsby Archtop B70 w/ Roller TOM bridge
  • Thin C Set neck
  • 22 Medium frets
  • Grover tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony
Mahogany wood pattern used for guitar building
Mahogany

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Winner: Tie.

Pickup Configuration

The ESP LTD PS-1000 has an P90P90 configuration while the Schecter Robin Zander Corsair has HH pickups.

P90P90 gives you two P90s for a crunchy vintage tone. The tone sits somewhere in the middle between typical single-coils and humbuckers. They also produce less hum than single-coils, but they don't cancel it completely like humbuckers.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

You can purchase similar pickups to the ESP LTD PS-1000's and use them on any guitar:

We found the same or similar pickups to the Schecter Robin Zander Corsair's online:

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

ESP LTD PS-1000 pickups switch and push knobs diagram
ESP LTD PS-1000's switch options
Schecter Robin Zander Corsair pickups switch and push knobs diagram
Schecter Robin Zander Corsair's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Robin Zander Corsair.

Final Sound Quality Scores

ESP LTD PS-1000
Pickups 90
Sustain 80
Versatility 53
Tuning Stability 75
Sound 75
Schecter Robin Zander Corsair
Pickups 90
Sustain 70
Versatility 54
Tuning Stability 65
Sound 70

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP LTD PS-1000 compares to the Schecter Robin Zander Corsair.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The ESP LTD PS-1000 is built in Indonesia while the Schecter Robin Zander Corsair is made in South Korea.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The ESP LTD PS-1000 has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

On the other hand, the Schecter Robin Zander Corsair comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Winner: Schecter Robin Zander Corsair.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the ESP LTD PS-1000 is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: ESP LTD PS-1000.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The ESP LTD PS-1000's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Schecter Robin Zander Corsair's is a Bigsby Tremolo. Bigsby tremolos are built differently than regular tremolos. They have a stiffer arm, which is something a lot of people like because the arm won't wiggle around a lot. On the other hand, this type of tremolo is more complicated to restring and it might not be as newbie-friendly as other simpler tremolos.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Schecter Robin Zander Corsair.

Tuners

The ESP LTD PS-1000 has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: ESP LTD PS-1000.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP LTD PS-1000
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Top Brand Pickups
  • Made in Indonesia
  • No High-Quality Nut
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Robin Zander Corsair
  • Expensive Wood
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in South Korea
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP LTD PS-1000
Quality of materials 66
Features 65
Quality Control 75
Build Quality 69
Schecter Robin Zander Corsair
Quality of materials 66
Features 60
Quality Control 80
Build Quality 69

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP LTD PS-1000 Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

ESP LTD PS-1000 and Schecter Robin Zander Corsair's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.75".

This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.

On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP LTD PS-1000 Neck Profile
ESP LTD PS-1000's neck profile
Schecter Robin Zander Corsair Neck Profile
Schecter Robin Zander Corsair's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The ESP LTD PS-1000 has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The Schecter Robin Zander Corsair, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

ESP LTD PS-1000 Fingerboard Radius
ESP LTD PS-1000's Fingerboard radius
Schecter Robin Zander Corsair Fingerboard Radius
Schecter Robin Zander Corsair's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the ESP LTD PS-1000's fingerboard radius is smaller, which means it's more curved than the Schecter Robin Zander Corsair's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Robin Zander Corsair.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the ESP LTD PS-1000 favors large hands more than the Schecter Robin Zander Corsair. But it's still more comfortable for people with small hands, as you can see in the score meter below.

ESP LTD PS-1000:
Big Hands
Small Hands
Schecter Robin Zander Corsair:
Big Hands
Small Hands

Fret Size

ESP LTD PS-1000 Frets Size
ESP LTD PS-1000's Frets Size
Schecter Robin Zander Corsair Frets Size
Schecter Robin Zander Corsair's Frets Size

The ESP LTD PS-1000 has XL Jumbo frets, which should be taller than the Schecter Robin Zander Corsair's Medium frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

ESP LTD PS-1000
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 70
Playability 80
Schecter Robin Zander Corsair
Bending & Vibrato Ease 80
Chord Playability 75
Solo Playability 70
Playability 75

Specs Side-by-Side

LTD PS-1000 vs Schecter Robin Zander Corsair
General LTD PS-1000 Schecter Robin Zander Corsair
Brand: ESP LTD Schecter
Year: 2019 2019
Configuration: P90P90 HH
Strings: 6 6
Made in: Indonesia South Korea
Series: Xtone Artist
Colors: Black, Blue, Purple White
Left-Handed Version: No No
Body
Type: Semi-Hollow Hollowbody
Body Material: Mahogany Maple
Bridge: Tonepros Locking TOM & Tailpiece Bigsby Archtop B70 w/ Roller TOM
Neck
Neck Joint: Set Set
Tuners: LTD Locking Grover
Fretboard: Macassar Ebony Ebony
Neck Material: 3pc Maple Mahogany 3-pc
Decoration: Blocks MOP Stars w/RZ at 12th Fret
Scale Size: 24.75" 24.75"
Shape: Thin U Thin C
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 22 XL Jumbo Stainless Steel 22 Medium Nickel Silver
Fretboard Radius: 13.78" 14"
Nut: Plastic Ivory Tusq
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickup: Seymour Duncan Phat Cat SPH90-1 (Humbucker / Passive) Seymour Duncan Phat Cat SPH90-1 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Seymour Duncan Phat Cat SPH90-1 (Humbucker / Passive) Seymour Duncan Phat Cat SPH90-1 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Speed Dome
Pickup Mods: None None
Volume Controls: 2 1
Tone Controls: 2 1