Swap
Swap
ESP LTD MH-1000
ESP LTD F-10
VS
Playability
80
Sound
81
Build
80
Value
80
Score
80
FIND IT ON:
Sweetwater logoMusician's Friend logo
Playability
78
Sound
65
Build
52
Value
75
Score
65
FIND IT ON:
Sweetwater logo
Add more to comparison

LTD MH-1000 vs F-10

Reasons to Get
LTD MH-1000 over F-10

Decorative Top
Quilted Maple vs None
Finished with beautiful natural wood patterns
Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2022 vs 2009
From a more recent year
Compound Radius
12" to 16" vs 13.78"
Balanced playability for chords and single-notes
Pickups Brand
Fishman vs None
Pickups from a renown brand
Nut Material
Locking vs Plastic
Best tuning stability for intense tremolo usage
Pickup Mods
Multi-Voicing vs None
Changes the voice (tones or gain) of the pickups
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.787'' (20mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.827'' (21mm) vs 0.866'' (22mm)
More comfortable at higher frets for small hands
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs
Pickups Power
Active vs Passive
More output
Value Score
80 vs 75
Better price/quality relationship

Reasons to Get
ESP LTD F-10 over MH-1000

Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.827'' (21mm)
More comfortable at higher frets for big hands
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Other Key Differences
LTD MH-1000 vs F-10

Bridge Pickup
Fishman Fluence Modern Ceramic vs ESP Designed LH-100B
Different Bridge Pickup
Neck Pickup
Fishman Fluence Modern Alnico vs ESP Designed LSH-100N
Different Neck Pickup
Body Wood
Mahogany vs Basswood
Different Body Wood
Fretboard Wood
Ebony vs Engineered
Different Fretboard Wood
Headstock
6 vs 3-3
Different Headstock
Nut Material
Locking vs Plastic
Different Nut Material

Shared Features
LTD MH-1000 vs F-10

Neck Wood
Maple
Same Neck Wood
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Neck Profile Type
U
Comfortable neck with more grip
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

ESP LTD F-10 Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP LTD MH-1000 is probably the better product overall with its final score of 80 compared to the ESP LTD F-10's 65 score, which is a significant difference.

The ESP LTD MH-1000 wins when it comes to sound, playability, build quality, value for the money. This means that it wins over the ESP LTD F-10 in every aspect.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

ESP LTD MH-1000
  • Comfortable shape
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

New Player Friendliness

ESP LTD F-10
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP LTD MH-1000 Overview

  • From ESP LTD's 2022 MH series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Quilted Maple top
  • Mahogany body
  • 3pc Maple neck
  • Macassar Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose 1000SE bridge
  • Extra Thin U Neck-Through neck
  • 24 XL Jumbo Stainless Steel frets
  • Grover tuners
  • Compare Specs >

ESP LTD F-10 Overview

  • From ESP LTD's 2009 F series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 13.78" Fretboard Radius
  • Basswood body
  • Maple neck
  • Engineered Hardwood fretboard
  • Bridge pickup: ESP Designed LH-100B (Humbucker/Passive)
  • Neck pickup: ESP Designed LSH-100N (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • TOM bridge
  • Thin U Bolt-On neck
  • 24 XL Jumbo frets
  • LTD tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Woods Used in the ESP LTD MH-1000

Ebony wood pattern used for guitar building
Ebony
Mahogany wood pattern used for guitar building
Mahogany

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the ESP LTD F-10

Engineered wood pattern used for guitar building
Engineered
Basswood wood pattern used for guitar building
Basswood

Engineered wood is strong, stable, and cheaper than traditional wood. It's made by grounding wood and putting it back together to get more material out of less wood. It's a good material, but some people prefer traditional wood because of tradition, looks, and even tone.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Winner: ESP LTD MH-1000.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The ESP LTD MH-1000 has pickups from a more specialized brand than the ESP LTD F-10. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.

You can purchase similar pickups to the ESP LTD MH-1000's and use them on any guitar:

The ESP LTD MH-1000's pickups are Active while the ESP LTD F-10's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: ESP LTD MH-1000.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the ESP LTD MH-1000 comes with some kind of pickup modification: Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

ESP LTD MH-1000 pickups switch and push knobs diagram
ESP LTD MH-1000's switch options
ESP LTD F-10 pickups switch and push knobs diagram
ESP LTD F-10's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: ESP LTD MH-1000.

Final Sound Quality Scores

ESP LTD MH-1000
Pickups 85
Sustain 85
Versatility 69
Tuning Stability 85
Sound 81
ESP LTD F-10
Pickups 55
Sustain 80
Versatility 59
Tuning Stability 65
Sound 65

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP LTD MH-1000 compares to the ESP LTD F-10.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The ESP LTD MH-1000 has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the ESP LTD F-10 comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Winner: ESP LTD MH-1000.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the ESP LTD MH-1000 is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: ESP LTD MH-1000.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The ESP LTD MH-1000's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

On the other hand, the ESP LTD F-10's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: ESP LTD MH-1000.

Tuners

Both come with regular tuners. The ESP LTD MH-1000's are Grover while the ESP LTD F-10's are LTD

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The ESP LTD MH-1000 has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the ESP LTD F-10 comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: ESP LTD MH-1000.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP LTD MH-1000
  • Stainless Steel Frets
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Multi-Voicing Pickups
  • Tremolo
  • Compound Radius Fretboard
  • Retainer Bar
  • No Locking Tuners
  • Made in Indonesia
  • No Weight Relief
  • No Luminescent Inlay
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
ESP LTD F-10
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP LTD MH-1000
Quality of materials 75
Features 90
Quality Control 75
Build Quality 80
ESP LTD F-10
Quality of materials 41
Features 50
Quality Control 65
Build Quality 52

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP LTD MH-1000 Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

ESP LTD MH-1000 and ESP LTD F-10's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP LTD MH-1000 Neck Profile
ESP LTD MH-1000's neck profile
ESP LTD F-10 Neck Profile
ESP LTD F-10's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the ESP LTD MH-1000 and the ESP LTD F-10 have a U-shaped neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

Fretboard Radius

ESP LTD MH-1000 Fretboard Compound Radius
ESP LTD MH-1000's Compound Fretboard Radius
ESP LTD F-10 Fingerboard Radius
ESP LTD F-10's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the ESP LTD MH-1000 is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

ESP LTD MH-1000:
Big Hands
Small Hands
ESP LTD F-10:
Big Hands
Small Hands

Fret Size

ESP LTD MH-1000 and ESP LTD F-10 Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

ESP LTD MH-1000
Bending & Vibrato Ease 70
Chord Playability 80
Solo Playability 90
Playability 80
ESP LTD F-10
Bending & Vibrato Ease 85
Chord Playability 70
Solo Playability 80
Playability 78

Specs Side-by-Side

LTD MH-1000 vs F-10
General LTD MH-1000 F-10
Brand: ESP LTD ESP LTD
Year: 2022 2009
Configuration: HH HH
Strings: 6 6
Made in: Indonesia Indonesia
Series: MH F
Colors: Blue Black
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Mahogany Basswood
Bridge: Floyd Rose 1000SE TOM
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Grover LTD
Fretboard: Macassar Ebony Engineered Hardwood
Neck Material: 3pc Maple Maple
Decoration: Offset Blocks Dots
Scale Size: 25.5" 25.5"
Shape: Extra Thin U Thin U
Thickness: 1st Fret: 0.748'' (19mm) - 12th Fret: 0.827'' (21mm) 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm)
Frets: 24 XL Jumbo Stainless Steel 24 XL Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 13.78"
Nut: Locking Plastic
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickup: Fishman Fluence Modern Ceramic (Humbucker / Active) ESP Designed LH-100B (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Fishman Fluence Modern Alnico (Humbucker / Active) ESP Designed LSH-100N (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: Multi-Voicing None
Volume Controls: 1 1
Tone Controls: 1 1