Swap
Swap
ESP LTD EC Arctic Metal
ESP LTD EC-1000
VS
Playability
83
Sound
73
Build
69
Value
75
Score
75
FIND IT ON:
Amazon logoSweetwater logo
Playability
83
Sound
77
Build
67
Value
76
Score
76
FIND IT ON:
Amazon logoSweetwater logo
Add more to comparison

LTD EC Arctic Metal vs EC-1000

Reasons to Get
LTD EC Arctic Metal over EC-1000

Pickup Mods
Coil Split vs Multi-Voicing
Splits humbuckers into single coil pickups
Pickups
H vs HH
Hum-free with more right hand freedom and sustain
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Avg. Weight
8.075lbs (3.7kgs) vs 8.125lbs (3.7kgs)
Tends to be lighter

Reasons to Get
ESP LTD EC-1000 over EC Arctic Metal

Pickup Mods
Multi-Voicing vs Coil Split
Changes the voice (tones or gain) of the pickups
Switch Positions
3 vs 0
More tone options
Volume Knobs
2 vs 1
More volume control
Tone Knobs
1 vs 0
More tone control
Pickups
HH vs H
High output without hum
Value Score
76 vs 75
Better price/quality relationship

Other Key Differences
LTD EC Arctic Metal vs EC-1000

Bridge Pickup
EMG 81TW vs Fishman Fluence Modern Ceramic
Different Bridge Pickup

Shared Features
LTD EC Arctic Metal vs EC-1000

Body Wood
Mahogany
Same Body Wood
Neck Wood
Mahogany
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Headstock
3-3
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Number of Frets
24
Same maximum octave
Neck Thickness at 1st Fret
0.787'' (20mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.866'' (22mm)
Same neck comfortability
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm)
Same string tension and fret separation
Fretboard Radius
13.78'' (350mm)
Same fretboard comfortability
Pickups Power
Active
More output
Neck Profile Type
U
Comfortable neck with more grip
Neck Joint
Set
Neck is glued to the body
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Locking Tuners
  • High-Quality Frets
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Nut
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP LTD EC-1000 is probably the better product overall with its final score of 76 compared to the ESP LTD EC Arctic Metal's 75 score, although not by a lot.

The ESP LTD EC-1000 wins when it comes to sound, value for the money. On the other hand, the ESP LTD EC Arctic Metal has the upper hand when it comes to build quality.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 6 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

ESP LTD EC Arctic Metal
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

New Player Friendliness

ESP LTD EC-1000
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP LTD EC Arctic Metal Overview

  • From ESP LTD's 2021 Arctic Metal series
  • Made in Indonesia
  • 6 strings
  • 24.75"'' scale
  • 13.78" Fretboard Radius
  • Mahogany body
  • 3Pc Mahogany neck
  • Macassar Ebony fretboard
  • Bridge pickup: EMG 81TW (Humbucker/Active)
  • 1 volume and 0 tone Dome knobs
  • Tonepros Locking TOM & Tailpiece bridge
  • Thin U Set neck
  • 24 XL Jumbo Stainless Steel frets
  • LTD Locking tuners
  • Weight between 7.85lbs (3.6kgs) and 8.3lbs (3.8kgs)
  • Compare Specs >

ESP LTD EC-1000 Overview

  • From ESP LTD's 2021 EC series
  • Made in Indonesia
  • 6 strings
  • 24.75"'' scale
  • 13.78" Fretboard Radius
  • Mahogany body
  • 3Pc Mahogany neck
  • Macassar Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 2 volume and 1 tone Dome knobs
  • 3-way Switch
  • Tonepros Locking TOM & Tailpiece bridge
  • Thin U Set neck
  • 24 XL Jumbo Stainless Steel frets
  • LTD Locking tuners
  • Weight between 7.75lbs (3.5kgs) and 8.5lbs (3.9kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany
Ebony wood pattern used for guitar building
Ebony

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Winner: Tie.

Pickup Configuration

The ESP LTD EC Arctic Metal has an H configuration while the ESP LTD EC-1000 has HH pickups.

A single H pickup gives you the advantage of having a little longer sustain (all other things being equal) because there will be less magnetic fields from other pickups affecting the strings' vibration. However, they also give you the least versatility because you won't have other pickups at different distances from the bridge to create different tones. A single humbucking pickup is used for noiseless high output, which is used mainly for Hard Rock genres.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

You can purchase similar pickups to the ESP LTD EC Arctic Metal's and use them on any guitar:

We found the same or similar pickups to the ESP LTD EC-1000's online:

Both use Active pickups. These pickups use an additional 9v battery to be able to increase their output for high gain tones. This is why they're popular among heavy metal guitarists. Their disadvantage is that you need batteries for the pickups, so you'll need to spend money on batteries and time swapping them. Also, the clean tones aren't as clean as other pickups because they'll have really hot output.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The ESP LTD EC-1000 gives you 3 switch options while the ESP LTD EC Arctic Metal gives you 0. This means that the ESP LTD EC-1000 gives you more options to find the right pickup combination for the type of sound you want to achieve

Both give you different pickup mod options.

The ESP LTD EC Arctic Metal offers Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

On the other hand, the ESP LTD EC-1000 comes with the following: Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

The ESP LTD EC Arctic Metal doesn't come with pickup switching options.

ESP LTD EC-1000 pickups switch and push knobs diagram
ESP LTD EC-1000's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: ESP LTD EC-1000.

Final Sound Quality Scores

ESP LTD EC Arctic Metal
Pickups 85
Sustain 85
Versatility 47
Tuning Stability 75
Sound 73
ESP LTD EC-1000
Pickups 85
Sustain 85
Versatility 61
Tuning Stability 75
Sound 77

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP LTD EC Arctic Metal compares to the ESP LTD EC-1000.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Both in this comparison come with stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP LTD EC Arctic Metal
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Top Brand Pickups
  • Coil Split Pickups
  • Luminescent Inlay
  • Made in Indonesia
  • No High-Quality Nut
  • No Neck-Through Build
  • No Weight Relief
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
ESP LTD EC-1000
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Top Brand Pickups
  • Multi-Voicing Pickups
  • Made in Indonesia
  • No High-Quality Nut
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP LTD EC Arctic Metal
Quality of materials 61
Features 70
Quality Control 75
Build Quality 69
ESP LTD EC-1000
Quality of materials 61
Features 65
Quality Control 75
Build Quality 67

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP LTD EC Arctic Metal Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

ESP LTD EC Arctic Metal and ESP LTD EC-1000's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.75".

This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.

On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP LTD EC Arctic Metal Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the ESP LTD EC Arctic Metal and the ESP LTD EC-1000 have a U-shaped neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

Fretboard Radius

ESP LTD EC Arctic Metal Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the ESP LTD EC Arctic Metal and the ESP LTD EC-1000 have the same fretboard radius of 13.78". It's closer to the 12'' that most Les Paul guitars have, but it's a bit flatter. It'll make it easier to play single notes than chords, but it's still relatively comfortable for chords.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

ESP LTD EC Arctic Metal:
Big Hands
Small Hands
ESP LTD EC-1000:
Big Hands
Small Hands

Fret Size

ESP LTD EC Arctic Metal and ESP LTD EC-1000 Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

ESP LTD EC Arctic Metal
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 80
Playability 83
ESP LTD EC-1000
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 80
Playability 83

Specs Side-by-Side

LTD EC Arctic Metal vs EC-1000
General LTD EC Arctic Metal EC-1000
Brand: ESP LTD ESP LTD
Year: 2021 2021
Configuration: H HH
Strings: 6 6
Made in: Indonesia Indonesia
Series: Arctic Metal EC
Colors: White Gold, Black, Blue, Red, Purple, Natural Burst, Amber Sunburst
Left-Handed Version: Yes Yes
Body
Type: Solid Body Solid Body
Body Material: Mahogany Mahogany
Bridge: Tonepros Locking TOM & Tailpiece Tonepros Locking TOM & Tailpiece
Neck
Neck Joint: Set Set
Tuners: LTD Locking LTD Locking
Fretboard: Macassar Ebony Macassar Ebony
Neck Material: 3Pc Mahogany 3Pc Mahogany
Decoration: Flag
Scale Size: 24.75" 24.75"
Shape: Thin U Thin U
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm)
Frets: 24 XL Jumbo Stainless Steel 24 XL Jumbo Stainless Steel
Fretboard Radius: 13.78" 13.78"
Nut: Plastic Plastic
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickup: EMG 81TW (Humbucker / Active) Fishman Fluence Modern Ceramic (Humbucker / Active)
Middle Pickup:
Neck Pickup: Fishman Fluence Modern Alnico (Humbucker / Active)
Switch: 0 Way 3 Way
Knobs: Dome Dome
Pickup Mods: Coil Split Multi-Voicing
Volume Controls: 1 2
Tone Controls: 0 1