Swap
Swap
ESP LTD EC-10
ESP LTD EC-1000
VS
Playability
83
Sound
65
Build
52
Value
77
Score
67
FIND IT ON:
Sweetwater logo
Playability
83
Sound
77
Build
67
Value
76
Score
76
FIND IT ON:
Amazon logoSweetwater logo
Add more to comparison

LTD EC-10 vs EC-1000

Reasons to Get
LTD EC-10 over EC-1000

Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Pickups Power
Passive vs Active
Cleaner sound and no battery needed
Value Score
77 vs 76
Better price/quality relationship

Reasons to Get
ESP LTD EC-1000 over EC-10

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2021 vs 2013
From a more recent year
Pickups Brand
Fishman vs None
Pickups from a renown brand
Pickup Mods
Multi-Voicing vs None
Changes the voice (tones or gain) of the pickups
Locking Tuners
Yes vs None
Easier to change strings
Pickups Power
Active vs Passive
More output

Other Key Differences
LTD EC-10 vs EC-1000

Bridge Pickup
ESP Designed LH-100B vs Fishman Fluence Modern Ceramic
Different Bridge Pickup
Neck Pickup
ESP Designed LH-100N vs Fishman Fluence Modern Alnico
Different Neck Pickup
Body Wood
Basswood vs Mahogany
Different Body Wood
Neck Wood
Maple vs Mahogany
Different Neck Wood
Fretboard Wood
Engineered vs Ebony
Different Fretboard Wood

Shared Features
LTD EC-10 vs EC-1000

Headstock
3-3
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
2
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Neck Thickness at 1st Fret
0.787'' (20mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.866'' (22mm)
Same neck comfortability
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm)
Same string tension and fret separation
Fretboard Radius
13.78'' (350mm)
Same fretboard comfortability
Neck Profile Type
U
Comfortable neck with more grip
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Frets

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Nut
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP LTD EC-1000 is probably the better product overall with its final score of 76 compared to the ESP LTD EC-10's 67 score, although not by a lot.

The ESP LTD EC-1000 wins when it comes to sound, build quality. On the other hand, the ESP LTD EC-10 has the upper hand when it comes to value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the ESP LTD EC-1000 is the better choice.

The ESP LTD EC-1000 meets 6 out of our 8 criteria items for beginner friendliness, while the ESP LTD EC-10 meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

ESP LTD EC-10
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

ESP LTD EC-1000
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP LTD EC-10 Overview

  • From ESP LTD's 2013 EC series
  • Made in Indonesia
  • 6 strings
  • 24.75"'' scale
  • 13.78" Fretboard Radius
  • Basswood body
  • Maple neck
  • Engineered Hardwood fretboard
  • Bridge pickup: ESP Designed LH-100B (Humbucker/Passive)
  • Neck pickup: ESP Designed LH-100N (Humbucker/Passive)
  • 2 volume and 1 tone Dome knobs
  • 3-way Switch
  • TOM & Tailpiece bridge
  • Thin U Bolt-On neck
  • 24 XL Jumbo frets
  • LTD tuners
  • Compare Specs >

ESP LTD EC-1000 Overview

  • From ESP LTD's 2021 EC series
  • Made in Indonesia
  • 6 strings
  • 24.75"'' scale
  • 13.78" Fretboard Radius
  • Mahogany body
  • 3Pc Mahogany neck
  • Macassar Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 2 volume and 1 tone Dome knobs
  • 3-way Switch
  • Tonepros Locking TOM & Tailpiece bridge
  • Thin U Set neck
  • 24 XL Jumbo Stainless Steel frets
  • LTD Locking tuners
  • Weight between 7.75lbs (3.5kgs) and 8.5lbs (3.9kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the ESP LTD EC-10

Maple wood pattern used for guitar building
Maple
Engineered wood pattern used for guitar building
Engineered
Basswood wood pattern used for guitar building
Basswood

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Engineered wood is strong, stable, and cheaper than traditional wood. It's made by grounding wood and putting it back together to get more material out of less wood. It's a good material, but some people prefer traditional wood because of tradition, looks, and even tone.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Woods Used in the ESP LTD EC-1000

Mahogany wood pattern used for guitar building
Mahogany
Ebony wood pattern used for guitar building
Ebony

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Winner: ESP LTD EC-1000.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The ESP LTD EC-1000 pickups from a more specialized brand than the ESP LTD EC-10. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.

We found the same or similar pickups to the ESP LTD EC-1000's online:

The ESP LTD EC-10's pickups are Passive while the ESP LTD EC-1000's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: ESP LTD EC-1000.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the ESP LTD EC-1000 comes with some kind of pickup modification: Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

ESP LTD EC-10 pickups switch and push knobs diagram
ESP LTD EC-10's switch options
ESP LTD EC-1000 pickups switch and push knobs diagram
ESP LTD EC-1000's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Tie.

Final Sound Quality Scores

ESP LTD EC-10
Pickups 55
Sustain 80
Versatility 61
Tuning Stability 65
Sound 65
ESP LTD EC-1000
Pickups 85
Sustain 85
Versatility 61
Tuning Stability 75
Sound 77

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP LTD EC-10 compares to the ESP LTD EC-1000.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the ESP LTD EC-1000 is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: ESP LTD EC-1000.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The ESP LTD EC-1000 has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: ESP LTD EC-1000.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The ESP LTD EC-10 has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the ESP LTD EC-1000 comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: ESP LTD EC-10.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP LTD EC-10
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
ESP LTD EC-1000
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Top Brand Pickups
  • Multi-Voicing Pickups
  • Made in Indonesia
  • No High-Quality Nut
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP LTD EC-10
Quality of materials 41
Features 50
Quality Control 65
Build Quality 52
ESP LTD EC-1000
Quality of materials 61
Features 65
Quality Control 75
Build Quality 67

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP LTD EC-10 Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

ESP LTD EC-10 and ESP LTD EC-1000's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.75".

This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.

On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP LTD EC-10 Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the ESP LTD EC-10 and the ESP LTD EC-1000 have a U-shaped neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

Fretboard Radius

ESP LTD EC-10 Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the ESP LTD EC-10 and the ESP LTD EC-1000 have the same fretboard radius of 13.78". It's closer to the 12'' that most Les Paul guitars have, but it's a bit flatter. It'll make it easier to play single notes than chords, but it's still relatively comfortable for chords.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

ESP LTD EC-10:
Big Hands
Small Hands
ESP LTD EC-1000:
Big Hands
Small Hands

Fret Size

ESP LTD EC-10 and ESP LTD EC-1000 Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

ESP LTD EC-10
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 80
Playability 83
ESP LTD EC-1000
Bending & Vibrato Ease 95
Chord Playability 75
Solo Playability 80
Playability 83

Specs Side-by-Side

LTD EC-10 vs EC-1000
General LTD EC-10 EC-1000
Brand: ESP LTD ESP LTD
Year: 2013 2021
Configuration: HH HH
Strings: 6 6
Made in: Indonesia Indonesia
Series: EC EC
Colors: Black Gold, Black, Blue, Red, Purple, Natural Burst, Amber Sunburst
Left-Handed Version: No Yes
Body
Type: Solid Body Solid Body
Body Material: Basswood Mahogany
Bridge: TOM & Tailpiece Tonepros Locking TOM & Tailpiece
Neck
Neck Joint: Bolt-On Set
Tuners: LTD LTD Locking
Fretboard: Engineered Hardwood Macassar Ebony
Neck Material: Maple 3Pc Mahogany
Decoration: Black Dot Flag
Scale Size: 24.75" 24.75"
Shape: Thin U Thin U
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm)
Frets: 24 XL Jumbo Nickel Silver 24 XL Jumbo Stainless Steel
Fretboard Radius: 13.78" 13.78"
Nut: Plastic Plastic
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickup: ESP Designed LH-100B (Humbucker / Passive) Fishman Fluence Modern Ceramic (Humbucker / Active)
Middle Pickup:
Neck Pickup: ESP Designed LH-100N (Humbucker / Passive) Fishman Fluence Modern Alnico (Humbucker / Active)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Multi-Voicing
Volume Controls: 2 2
Tone Controls: 1 1