Show Full Spec Comparison
LTD BUZ-7 | Schecter C-7 FR S Silver Mountain | |
---|---|---|
General | ||
Brand: | ESP LTD | Schecter |
Year: | 2013 | 2020 |
Configuration: | HH | HH |
Strings: | 7 | 7 |
Made in: | Indonesia | South Korea |
Series: | Signature | Silver Mountain |
Colors: | Black | White Patterns |
Left-Handed Version: | No | Yes |
Body | ||
Type: | Solid Body | Solid Body |
Body Material: | Alder | Mahogany |
Bridge: | Floyd Rose 1000 | Floyd Rose 1500 Series |
Neck | ||
Neck Joint: | Neck-Through | Set |
Tuners: | Grover | Grover Rotomatic 18:1 |
Fretboard: | Macassar Ebony | Ebony |
Neck Material: | 5pc Maple/Walnut | Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods |
Decoration: | Offset Dots | Lines |
Scale Size: | 25.5" | 26.5" |
Shape: | Extra Thin Flat | Thin C |
Thickness: | 1st Fret: 0.724'' (18.4mm) - 12th Fret: 0.827'' (21mm) | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) |
Frets: | 24 XL Jumbo Nickel Silver | 24 XL Jumbo Stainless Steel |
Fretboard Radius: | 15.75" | 16" |
Nut: | Locking | Locking |
Nut Width: | 48mm (1.89'') | 47.6mm (1.875'') |
Electronics | ||
Bridge Pickups: | Fishman Fluence SRC Signature (Humbucker / Active) | Schecter USA Sonic Seducer (Humbucker / Passive) |
Middle Pickup: | ||
Neck Pickup: | Fishman Fluence SRC Signature (Humbucker / Active) | Sustainiac (Humbucker / Passive) |
Switch: | 3 Way | 3 Way |
Knobs: | Dome | Dome |
Pickup Mods: | Multi-Voicing | Sustainer |
Volume Controls: | 1 | 1 |
Tone Controls: | 0 | 2 |
Hardware | ||
Strap Lock: | No | No |
Hardware Color: | Black | Black |
Show Diagrams Comparison
Reasons to Get
LTD BUZ-7 over Schecter C-7 FR S Silver Mountain
Reasons to Get
Schecter C-7 FR S Silver Mountain over ESP LTD BUZ-7
Other Key Differences
LTD BUZ-7 vs Schecter C-7 FR S Silver Mountain
Shared Features
LTD BUZ-7 vs Schecter C-7 FR S Silver Mountain
Common Strengths
- Retainer Bar
- High-Quality Nut
- High-Quality Frets
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the ESP LTD BUZ-7 favors large hands more than the Schecter C-7 FR S Silver Mountain.
ESP LTD BUZ-7:
Schecter C-7 FR S Silver Mountain:
Beginner Friendliness
Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
ESP LTD BUZ-7- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
New Player Friendliness
Schecter C-7 FR S Silver Mountain- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the ESP LTD BUZ-7
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Schecter C-7 FR S Silver Mountain
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Winner: Schecter C-7 FR S Silver Mountain.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
You can purchase similar pickups to the ESP LTD BUZ-7's and use them on any guitar:
The ESP LTD BUZ-7's pickups are Active while the Schecter C-7 FR S Silver Mountain's are Passive.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Both give you different pickup mod options.
The ESP LTD BUZ-7 offers Multi-Voicing.
Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.
On the other hand, the Schecter C-7 FR S Silver Mountain comes with the following: Sustainer.
The pickups with Sustainer are able to recreate the 'feedback' you get when you hold your guitar near a speaker without muting the strings. This allows them to produce infinite sustain that you can use for as long as you want to create interest sounds and harmonics.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter C-7 FR S Silver Mountain.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP LTD BUZ-7 compares to the Schecter C-7 FR S Silver Mountain.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The ESP LTD BUZ-7 is built in Indonesia while the Schecter C-7 FR S Silver Mountain is made in South Korea.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Locking nuts. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
Both models come with a retainer bar, which is helpful when changing the strings on a double-locking tremolo. Without it, the strings would change pitch once you lock down the nut, so you'd have to make more micro-adjustments at the bridge to tune it correctly
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Schecter C-7 FR S Silver Mountain is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Schecter C-7 FR S Silver Mountain.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The ESP LTD BUZ-7's are Grover while the Schecter C-7 FR S Silver Mountain's are Grover Rotomatic 18:1
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The ESP LTD BUZ-7 has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the Schecter C-7 FR S Silver Mountain comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: ESP LTD BUZ-7.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
ESP LTD BUZ-7
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Multi-Voicing Pickups
- Tremolo
- Retainer Bar
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Schecter C-7 FR S Silver Mountain
- Stainless Steel Frets
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Sustainer Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- Made in South Korea
- No Neck-Through Build
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the ESP LTD BUZ-7 has the wider nut with 48mm (1.89'') vs 47.6mm (1.875''). This is a 0.4mm (0.015'') difference
This means that it will be more difficult to do bar chords on the ESP LTD BUZ-7, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Schecter C-7 FR S Silver Mountain has the longest scale: 26.5". The ESP LTD BUZ-7 is only 25.5" long. This is a 1'' (25.4mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The ESP LTD BUZ-7 has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
The Schecter C-7 FR S Silver Mountain, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the ESP LTD BUZ-7's fingerboard radius is smaller, which means it's more curved than the Schecter C-7 FR S Silver Mountain's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter C-7 FR S Silver Mountain.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Fret Size
Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.