Swap
Swap
ESP E-II T-B7 Baritone
Schecter C-1 Exotic Spalted Maple
VS
Playability
78
Sound
76
Build
79
Value
68
Score
78
FIND IT ON:
Sweetwater logo
Playability
77
Sound
72
Build
65
Value
76
Score
71
FIND IT ON:
Amazon logoSweetwater logoMusician's Friend logo
Add more to comparison

E-II T-B7 Baritone vs Schecter C-1 Exotic Spalted Maple

Reasons to Get
E-II T-B7 Baritone over Schecter C-1 Exotic Spalted Maple

Country of Manufacturing
Japan vs Indonesia
Built with higher quality standards
Neck Profile
Thin U vs Thin C
Comfortable neck with more grip
Pickups Brand
EMG vs None
Pickups from a renown brand
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Strings
7 vs 6
Allows you to play lower notes
Neck Thickness at 1st Fret
0.787'' (20mm) vs 0.79'' (20.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.866'' (22mm) vs 0.87'' (22.1mm)
More comfortable at higher frets for small hands
Nut Width
1.89'' (48mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Strap Lock
Yes vs None
Protects your guitar from dropping by locking the strap
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Scale Length
27'' (685.8mm) vs 25.5'' (647.7mm)
Lower action and brighter natural tone
Fretboard Radius
12'' (304.8mm) vs 14'' (355.6mm)
More curved fretboard helpful to play chords without muting strings
Pickups Power
Active vs Passive
More output

Reasons to Get
Schecter C-1 Exotic Spalted Maple over ESP E-II T-B7 Baritone

Decorative Top
Spalted Maple vs None
Finished with beautiful natural wood patterns
Release Year
2019 vs 2014
From a more recent year
Neck Profile
Thin C vs Thin U
Comfortable neck that works for most people
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Strings
6 vs 7
Narrower neck and fewer strings to change
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.787'' (20mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.87'' (22.1mm) vs 0.866'' (22mm)
More comfortable at higher frets for big hands
Nut Width
1.654'' (42mm) vs 1.89'' (48mm)
Favors small hands, easier bar chords and other shapes
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Scale Length
25.5'' (647.7mm) vs 27'' (685.8mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
14'' (355.6mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend
Pickups Power
Passive vs Active
Cleaner sound and no battery needed
Value Score
76 vs 68
Better price/quality relationship

Other Key Differences
E-II T-B7 Baritone vs Schecter C-1 Exotic Spalted Maple

Bridge Pickup
EMG 81-7 vs Schecter Diamond 78 Special
Different Bridge Pickup
Neck Pickup
EMG 707 vs Schecter Diamond 78
Different Neck Pickup
Body Wood
Alder vs Mahogany
Different Body Wood
Neck Wood
Maple vs Roasted Maple
Different Neck Wood
Headstock
7 vs 3-3
Different Headstock
Nut Material
Bone vs Ivory Tusq
Different Nut Material

Shared Features
E-II T-B7 Baritone vs Schecter C-1 Exotic Spalted Maple

Fretboard Wood
Ebony
Same Fretboard Wood
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Locking Tuners
  • High-Quality Nut
  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the ESP E-II T-B7 Baritone is probably the better product overall with its final score of 78 compared to the Schecter C-1 Exotic Spalted Maple's 71 score, although not by a lot.

The ESP E-II T-B7 Baritone wins when it comes to sound, playability, build quality. On the other hand, the Schecter C-1 Exotic Spalted Maple has the upper hand when it comes to value for the money.

If you got small hands, you'll probably feel that the Schecter C-1 Exotic Spalted Maple is easier to play.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Schecter C-1 Exotic Spalted Maple is the better choice.

The Schecter C-1 Exotic Spalted Maple meets 6 out of our 8 criteria items for beginner friendliness, while the ESP E-II T-B7 Baritone meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

ESP E-II T-B7 Baritone
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale

New Player Friendliness

Schecter C-1 Exotic Spalted Maple
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

ESP E-II T-B7 Baritone Overview

  • From ESP E-II's 2014 TE series
  • Made in Japan
  • 7 strings
  • 27"'' scale
  • 12" Fretboard Radius
  • Alder body
  • 3pc Maple neck
  • Ebony fretboard
  • Bridge pickup: EMG 81-7 (Humbucker/Active)
  • Neck pickup: EMG 707 (Humbucker/Active)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Tonepros Locking TOM w/ String Thru bridge
  • Thin U Neck-Through neck
  • 24 XL Jumbo frets
  • Gotoh Locking tuners
  • Compare Specs >

Schecter C-1 Exotic Spalted Maple Overview

  • From Schecter's 2019 Exotic series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 14" Fretboard Radius
  • Spalted Maple top
  • Mahogany body
  • Roasted Maple/Purpleheart Multi-ply with Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Schecter Diamond 78 Special (Humbucker/Passive)
  • Neck pickup: Schecter Diamond 78 (Humbucker/Passive)
  • 1 volume and 1 tone Speed knobs
  • 3-way Switch
  • Wilkinson WVS50IIK Tremolo bridge
  • Thin C Bolt-On neck
  • 24 XL Jumbo frets
  • Schecter Locking tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Ebony wood pattern used for guitar building
Ebony

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the ESP E-II T-B7 Baritone

Maple wood pattern used for guitar building
Maple
Alder wood pattern used for guitar building
Alder

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Schecter C-1 Exotic Spalted Maple

Roasted Maple wood pattern used for guitar building
Roasted Maple
Mahogany wood pattern used for guitar building
Mahogany

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Winner: Schecter C-1 Exotic Spalted Maple.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The ESP E-II T-B7 Baritone has pickups from a more specialized brand than the Schecter C-1 Exotic Spalted Maple. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.

You can purchase similar pickups to the ESP E-II T-B7 Baritone's and use them on any guitar:

The ESP E-II T-B7 Baritone's pickups are Active while the Schecter C-1 Exotic Spalted Maple's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: ESP E-II T-B7 Baritone.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the Schecter C-1 Exotic Spalted Maple comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

ESP E-II T-B7 Baritone pickups switch and push knobs diagram
ESP E-II T-B7 Baritone's switch options
Schecter C-1 Exotic Spalted Maple pickups switch and push knobs diagram
Schecter C-1 Exotic Spalted Maple's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter C-1 Exotic Spalted Maple.

Final Sound Quality Scores

ESP E-II T-B7 Baritone
Pickups 85
Sustain 90
Versatility 49
Tuning Stability 80
Sound 76
Schecter C-1 Exotic Spalted Maple
Pickups 55
Sustain 80
Versatility 79
Tuning Stability 75
Sound 72

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the ESP E-II T-B7 Baritone compares to the Schecter C-1 Exotic Spalted Maple.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The ESP E-II T-B7 Baritone is built in Japan while the Schecter C-1 Exotic Spalted Maple is made in Indonesia.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: ESP E-II T-B7 Baritone

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The ESP E-II T-B7 Baritone has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Schecter C-1 Exotic Spalted Maple comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The ESP E-II T-B7 Baritone's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Schecter C-1 Exotic Spalted Maple's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The ESP E-II T-B7 Baritone has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Schecter C-1 Exotic Spalted Maple comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: ESP E-II T-B7 Baritone.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
ESP E-II T-B7 Baritone
  • Locking Tuners
  • Made in Japan
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Strap Lock
  • Cheap Fret Wire (NS)
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
Strengths & Weaknesses
Schecter C-1 Exotic Spalted Maple
  • Locking Tuners
  • Expensive Wood
  • Ivory Tusq Nut
  • Coil Split Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • Made in Indonesia
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

ESP E-II T-B7 Baritone
Quality of materials 66
Features 75
Quality Control 95
Build Quality 79
Schecter C-1 Exotic Spalted Maple
Quality of materials 55
Features 70
Quality Control 70
Build Quality 65

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

ESP E-II T-B7 Baritone Nut Width
ESP E-II T-B7 Baritone Nut Width
Schecter C-1 Exotic Spalted Maple Nut Width
Schecter C-1 Exotic Spalted Maple Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the ESP E-II T-B7 Baritone has the wider nut with 48mm (1.89'') vs 42mm (1.654''). This is a 6mm (0.236'') difference

This means that it will be more difficult to do bar chords on the ESP E-II T-B7 Baritone, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

ESP E-II T-B7 Baritone's Scale Length
ESP E-II T-B7 Baritone's Scale Length
Schecter C-1 Exotic Spalted Maple's Scale Length
Schecter C-1 Exotic Spalted Maple's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The ESP E-II T-B7 Baritone has the longest scale: 27". The Schecter C-1 Exotic Spalted Maple is only 25.5" long. This is a 1.5'' (38.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

ESP E-II T-B7 Baritone Neck Profile
ESP E-II T-B7 Baritone's neck profile
Schecter C-1 Exotic Spalted Maple Neck Profile
Schecter C-1 Exotic Spalted Maple's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The ESP E-II T-B7 Baritone has a U type of neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.

The Schecter C-1 Exotic Spalted Maple, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

ESP E-II T-B7 Baritone Fingerboard Radius
ESP E-II T-B7 Baritone's Fingerboard radius
Schecter C-1 Exotic Spalted Maple Fingerboard Radius
Schecter C-1 Exotic Spalted Maple's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the ESP E-II T-B7 Baritone's fingerboard radius is smaller, which means it's more curved than the Schecter C-1 Exotic Spalted Maple's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter C-1 Exotic Spalted Maple.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the ESP E-II T-B7 Baritone favors large hands more than the Schecter C-1 Exotic Spalted Maple.

ESP E-II T-B7 Baritone:
Big Hands
Small Hands
Schecter C-1 Exotic Spalted Maple:
Big Hands
Small Hands

Fret Size

ESP E-II T-B7 Baritone and Schecter C-1 Exotic Spalted Maple Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

ESP E-II T-B7 Baritone
Bending & Vibrato Ease 85
Chord Playability 60
Solo Playability 90
Playability 78
Schecter C-1 Exotic Spalted Maple
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 90
Playability 77

Specs Side-by-Side

E-II T-B7 Baritone vs Schecter C-1 Exotic Spalted Maple
General E-II T-B7 Baritone Schecter C-1 Exotic Spalted Maple
Brand: ESP E-II Schecter
Year: 2014 2019
Configuration: HH HH
Strings: 7 6
Made in: Japan Indonesia
Series: TE Exotic
Colors: White, Black Natural
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Alder Mahogany
Bridge: Tonepros Locking TOM w/ String Thru Wilkinson WVS50IIK Tremolo
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Gotoh Locking Schecter Locking
Fretboard: Ebony Ebony
Neck Material: 3pc Maple Roasted Maple/Purpleheart Multi-ply with Carbon Fiber Reinforcement Rods
Decoration: Abalone Lines
Scale Size: 27" 25.5"
Shape: Thin U Thin C
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 24 XL Jumbo Nickel Silver 24 XL Jumbo Nickel Silver
Fretboard Radius: 12" 14"
Nut: Bone Ivory Tusq
Nut Width: 48mm (1.89'') 42mm (1.654'')
Electronics
Bridge Pickup: EMG 81-7 (Humbucker / Active) Schecter Diamond 78 Special (Humbucker / Passive)
Middle Pickup:
Neck Pickup: EMG 707 (Humbucker / Active) Schecter Diamond 78 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Speed
Pickup Mods: None Coil Split
Volume Controls: 1 1
Tone Controls: 1 1