Show Full Spec Comparison
| D'Angelico Excel SS | Schecter Nick Johnston Traditional HSS | |
|---|---|---|
| General | ||
| Brand: | D'Angelico | Schecter |
| Year: | 2021 | 2020 |
| Configuration: | HH | HSS |
| Strings: | 6 | 6 |
| Made in: | South Korea | Indonesia |
| Series: | Excel | Artist |
| Colors: | Natural | White, Blue, Green, Pink, Orange |
| Left-Handed Version: | No | Yes |
| Body | ||
| Type: | Semi-Hollow | Solid Body |
| Body Material: | Laminated Flame Maple | Alder |
| Bridge: | Gold Tune-O-Matic | Diamond Vintage Tremolo |
| Neck | ||
| Neck Joint: | Set | Bolt-On |
| Tuners: | Grover 150 Imperial | Schecter Locking |
| Fretboard: | Ebony | Roasted Maple |
| Neck Material: | Maple | Roasted Maple |
| Decoration: | Mother of Pearl/Abalone Split-Block | Brass Circles |
| Scale Size: | 25" | 25.5" |
| Shape: | C-Shape | Thin C |
| Frets: | 22 Medium Jumbo Nickel Silver | 22 XL Jumbo Nickel Silver |
| Fretboard Radius: | 16" | 14" |
| Nut: | Ivory Tusq | Black Tusq XL |
| Nut Width: | 42.9mm (1.688'') | 42mm (1.654'') |
| Electronics | ||
| Bridge Pickups: | USA Seymour Duncan 59 Humbucker (Humbucker / Passive) | Schecter Diamond 78 (Humbucker / Passive) |
| Middle Pickup: | Schecter Diamond Nick Johnston Single Coil (Single Coil / Passive) | |
| Neck Pickup: | USA Seymour Duncan 59 Humbucker (Humbucker / Passive) | Schecter Diamond Nick Johnston Single Coil (Single Coil / Passive) |
| Switch: | 3 Way | 5 Way |
| Knobs: | Speed | Bell |
| Pickup Mods: | Coil Split | Coil Split |
| Volume Controls: | 2 | 1 |
| Tone Controls: | 2 | 1 |
| Hardware | ||
| Strap Lock: | Yes | No |
| Hardware Color: | Gold | Chrome |
Show Diagrams Comparison
Reasons to Get
D'Angelico Excel SS over Schecter Nick Johnston Traditional HSS
Reasons to Get
Schecter Nick Johnston Traditional HSS over D'Angelico Excel SS
Other Key Differences
D'Angelico Excel SS vs Schecter Nick Johnston Traditional HSS
Shared Features
D'Angelico Excel SS vs Schecter Nick Johnston Traditional HSS
Common Strengths
- Pickup Alter Switch/Knob
- High-Quality Nut
Common Weaknesses
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the D'Angelico Excel SS favors large hands more than the Schecter Nick Johnston Traditional HSS. But it's still more comfortable for people with small hands, as you can see in the score meter below.
D'Angelico Excel SS:
Schecter Nick Johnston Traditional HSS:
Beginner Friendliness
The Schecter Nick Johnston Traditional HSS meets 6 out of our 8 criteria items for beginner friendliness, while the D'Angelico Excel SS meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
D'Angelico Excel SS- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Schecter Nick Johnston Traditional HSS- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the D'Angelico Excel SS
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
This wood has beautiful patterns only found in specific types of maple.
Woods Used in the Schecter Nick Johnston Traditional HSS
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Winner: D'Angelico Excel SS.
Pickup Configuration
The D'Angelico Excel SS has an HH configuration while the Schecter Nick Johnston Traditional HSS has HSS pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.
Pickups Quality
The D'Angelico Excel SS has pickups from a more specialized brand than the Schecter Nick Johnston Traditional HSS. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: D'Angelico Excel SS.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Schecter Nick Johnston Traditional HSS gives you 5 switch options while the D'Angelico Excel SS gives you 3. This means that the Schecter Nick Johnston Traditional HSS gives you more options to find the right pickup combination for the type of sound you want to achieve
Both offer you the same type of pickup mod: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter Nick Johnston Traditional HSS.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the D'Angelico Excel SS compares to the Schecter Nick Johnston Traditional HSS.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The D'Angelico Excel SS is built in South Korea while the Schecter Nick Johnston Traditional HSS is made in Indonesia.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The D'Angelico Excel SS has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Schecter Nick Johnston Traditional HSS comes with a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The D'Angelico Excel SS's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Schecter Nick Johnston Traditional HSS's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Schecter Nick Johnston Traditional HSS has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Schecter Nick Johnston Traditional HSS.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The D'Angelico Excel SS has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the Schecter Nick Johnston Traditional HSS comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Schecter Nick Johnston Traditional HSS.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
D'Angelico Excel SS
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Coil Split Pickups
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in South Korea
- No Neck-Through Build
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Schecter Nick Johnston Traditional HSS
- Locking Tuners
- Black Tusq XL Nut
- Coil Split Pickups
- Tremolo
- Cheap Fret Wire (NS)
- Made in Indonesia
- No Expensive Woods
- No Top Brand Pickups
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the D'Angelico Excel SS has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference
This means that it will be more difficult to do bar chords on the D'Angelico Excel SS, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Schecter Nick Johnston Traditional HSS has the longest scale: 25.5". The D'Angelico Excel SS is only 25" long. This is a 0.5'' (12.7mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the D'Angelico Excel SS and the Schecter Nick Johnston Traditional HSS have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Schecter Nick Johnston Traditional HSS's fingerboard radius is smaller, which means it's more curved than the D'Angelico Excel SS's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the D'Angelico Excel SS.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Fret Size
The Schecter Nick Johnston Traditional HSS has XL Jumbo frets, which should be taller than the D'Angelico Excel SS's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
