Swap
Swap
Cort G110
Cort G260CS
VS
Playability
67
Sound
64
Build
55
Value
77
Score
62
FIND IT ON:
Sweetwater logo
Playability
67
Sound
67
Build
59
Value
74
Score
64
FIND IT ON:
Sweetwater logo
Add more to comparison

Cort G110 vs G260CS

Reasons to Get
Cort G110 over G260CS

Nut Width
1.656'' (42.1mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Value Score
77 vs 74
Better price/quality relationship

Reasons to Get
Cort G260CS over G110

Release Year
2019 vs 2015
From a more recent year
Nut Material
Bone vs Plastic
Good quality nut with rich tone
Tone Knobs
2 vs 1
More tone control
Nut Width
1.654'' (42mm) vs 1.656'' (42.1mm)
Favors small hands, easier bar chords and other shapes

Other Key Differences
Cort G110 vs G260CS

Bridge Pickup
Cort Powersound Humbucker vs Cort Voiced Tone VTH-77
Different Bridge Pickup
Middle Pickup
Cort Powersound Single Coil vs Cort Voiced Tone VTS-63
Different Middle Pickup
Neck Pickup
Cort Powersound Single Coil vs Cort Voiced Tone VTS-63
Different Neck Pickup
Body Wood
Poplar vs Alder
Different Body Wood
Neck Wood
Maple vs Roasted Maple
Different Neck Wood
Fretboard Wood
Jatoba vs Pau Ferro
Different Fretboard Wood
Nut Material
Plastic vs Bone
Different Nut Material

Shared Features
Cort G110 vs G260CS

Headstock
6
Same Headstock
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
5
Same pickups versatility
Volume Knobs
1
Same volume control
Pickups
HSS
High output with beautiful cleans and tone versatility
Number of Frets
22
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Tremolo
Simple vibratos without too much maintenance
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Fretboard Radius
9.5'' (241.3mm)
Same fretboard comfortability
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Bolt-On
Allows you to detach and swap the neck
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Weight Relief
  • Locking Tuners
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • Expensive Wood
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

Cort G260CS Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Cort G260CS is probably the better product overall with its final score of 64 compared to the Cort G110's 62 score, although not by a lot.

The Cort G260CS wins when it comes to sound, build quality. On the other hand, the Cort G110 has the upper hand when it comes to value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 6 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Cort G110
  • Comfortable shape
  • Easy-to-use bridge
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners

New Player Friendliness

Cort G260CS
  • Comfortable shape
  • Easy-to-use bridge
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Cort G110 Overview

  • From Cort's 2015 G series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 9.5" Fretboard Radius
  • Poplar body
  • Hard Maple neck
  • Jatoba fretboard
  • Bridge pickup: Cort Powersound Humbucker (Humbucker/Passive)
  • Middle pickup: Cort Powersound Single Coil (Single Coil/Passive)
  • Neck pickup: Cort Powersound Single Coil (Single Coil/Passive)
  • 1 volume and 1 tone Bell knobs
  • 5-way Switch
  • 6 Point Vintage Tremolo bridge
  • C Bolt-On neck
  • 22 Medium frets
  • Die-Cast tuners
  • Compare Specs >

Cort G260CS Overview

  • From Cort's 2019 G series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 9.5" Fretboard Radius
  • Alder body
  • Roasted Maple neck
  • Pau Ferro fretboard
  • Bridge pickup: Cort Voiced Tone VTH-77 (Humbucker/Passive)
  • Middle pickup: Cort Voiced Tone VTS-63 (Single Coil/Passive)
  • Neck pickup: Cort Voiced Tone VTS-63 (Single Coil/Passive)
  • 1 volume and 2 tone Bell knobs
  • 5-way Switch
  • 2 Point Tremolo w/ Steel Bent Saddle bridge
  • C Bolt-On neck
  • 22 Medium frets
  • Vintage Style tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Cort G110

Maple wood pattern used for guitar building
Maple
Jatoba wood pattern used for guitar building
Jatoba
Poplar wood pattern used for guitar building
Poplar

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.

Poplar is a cheaper and heavier alternative to Alder wood. It terms of tone, it emphasizes the low-end and has cutting mids. It's relatively soft compared to most body woods. Find out more about Poplar.

Woods Used in the Cort G260CS

Roasted Maple wood pattern used for guitar building
Roasted Maple
Pau Ferro wood pattern used for guitar building
Pau Ferro
Alder wood pattern used for guitar building
Alder

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Pau Ferro has a dark, chocolate-like color with straight dark grains that is being used as a replacement to Rosewood due to the regulations. It produces a warm tone that is somewhere between Mahogany and Rosewood. Find out more about Pau Ferro.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HSS. HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.

Pickups Quality

None of these use a specialized pickup brand for their pickups. Some of the best guitars on the market come with pickups from brands like EMG, Seymour Duncan, DiMarzio, etc. You might want to replace your pickups eventually if you want to get the best sound out of any of these instruments.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

They both share the following switching options:

Cort G110 and Cort G260CS pickups switch selector and push knobs diagram
Cort G110 and Cort G260CS's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Cort G260CS.

Final Sound Quality Scores

Cort G110
Pickups 60
Sustain 65
Versatility 70
Tuning Stability 60
Sound 64
Cort G260CS
Pickups 60
Sustain 70
Versatility 72
Tuning Stability 65
Sound 67

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Cort G110 compares to the Cort G260CS.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Cort G110 has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

On the other hand, the Cort G260CS comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

Winner: Cort G260CS.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. The Cort G110's are Die-Cast while the Cort G260CS's are Vintage Style

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Cort G110
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Cort G260CS
  • Bone Nut
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Expensive Woods
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Cort G110
Quality of materials 46
Features 55
Quality Control 65
Build Quality 55
Cort G260CS
Quality of materials 56
Features 55
Quality Control 65
Build Quality 59

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Cort G110 Nut Width
Cort G110 Nut Width
Cort G260CS Nut Width
Cort G260CS Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Cort G110 has the wider nut with 42.1mm (1.656'') vs 42mm (1.654''). This is a 0.1mm (0.002'') difference

This means that it will be more difficult to do bar chords on the Cort G110, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Cort G110 and Cort G260CS's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Cort G110 Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Cort G110 and the Cort G260CS have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Cort G110 Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Cort G110 and the Cort G260CS have the same fretboard radius of 9.5". This is the most common radius for Stratocaster guitars. It's considered curved when compared to most other models. This allows you to play chords very easily without muting strings accidentally and gives you more space between strings for fingerpicking. However, this curve also gives the guitar less allowance for lower action. If you bend too hard at the high frets, some of your notes might get muted because the curve will make the string fret out.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Cort G110:
Big Hands
Small Hands
Cort G260CS:
Big Hands
Small Hands

Fret Size

Cort G110 and Cort G260CS Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Cort G110
Bending & Vibrato Ease 60
Chord Playability 80
Solo Playability 60
Playability 67
Cort G260CS
Bending & Vibrato Ease 60
Chord Playability 80
Solo Playability 60
Playability 67

Specs Side-by-Side

Cort G110 vs G260CS
General Cort G110 G260CS
Brand: Cort Cort
Year: 2015 2019
Configuration: HSS HSS
Strings: 6 6
Made in: Indonesia Indonesia
Series: G G
Colors: Sunburst, Black, Red White, Sunburst, Black
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Poplar Alder
Bridge: 6 Point Vintage Tremolo 2 Point Tremolo w/ Steel Bent Saddle
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: Die-Cast Vintage Style
Fretboard: Jatoba Pau Ferro
Neck Material: Hard Maple Roasted Maple
Decoration: White Dots Pearloid Dots
Scale Size: 25.5" 25.5"
Shape: C C
Frets: 22 Medium Nickel Silver 22 Medium Nickel Silver
Fretboard Radius: 9.5" 9.5"
Nut: Plastic Bone
Nut Width: 42.1mm (1.656'') 42mm (1.654'')
Electronics
Bridge Pickup: Cort Powersound Humbucker (Humbucker / Passive) Cort Voiced Tone VTH-77 (Humbucker / Passive)
Middle Pickup: Cort Powersound Single Coil (Single Coil / Passive) Cort Voiced Tone VTS-63 (Single Coil / Passive)
Neck Pickup: Cort Powersound Single Coil (Single Coil / Passive) Cort Voiced Tone VTS-63 (Single Coil / Passive)
Switch: 5 Way 5 Way
Knobs: Bell Bell
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 1 2