Swap
Swap
Cort Earth Mini E Adirondack
Cort SFX-Myrtlewood
VS
Playability
78
Sound
83
Build
67
Value
86
Score
76
FIND IT ON:
Sweetwater logoMusician's Friend logo
Playability
73
Sound
81
Build
72
Value
80
Score
75
FIND IT ON:
Sweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Cort Earth Mini E Adirondack vs SFX-Myrtlewood Specs Comparison
Cort Earth Mini E Adirondack SFX-Myrtlewood
General
Brand: Cort Cort
Year: 2020 2020
Strings: 6 6
Made in: China Indonesia
Series: Earth SFX
Colors: Natural Brown, Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Adirondack Spruce Torrefied Solid Myrtlewood
Sides Material: Mahogany Laurel
Back Material: Mahogany Laurel
Bridge: Ovangkol Ovangkol
Neck
Neck Joint: Set Set
Tuners: Die-Cast w/ Black Knobs Die-Cast w/ Black Knobs
Fretboard: Ovangkol Ovangkol
Neck Material: Mahogany Mahogany
Decoration: White Dots White Dots
Scale Size: 22.8" 25.3"
Shape: Acoustic Cort Acoustic Modern V Shape
Frets: 19 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 15.748" 15.75"
Nut: Bone Plastic
Nut Width: 43mm (1.693'') 43mm (1.693'')
Electronics
Pickups: Cort CE304T (Preamp / Active) Fishman Presys II (Preamp / Active)
Hardware
Strap Lock: No No
Hardware Color: Chrome Black & Chrome

Reasons to Get
Cort Earth Mini E Adirondack over SFX-Myrtlewood

Neck Profile
Acoustic Cort vs Acoustic Modern V Shape
Comfortable neck that works for most people
Nut Material
Bone vs Plastic
Good quality nut with rich tone
Body Shape
Dreadnought vs Concert
Prominent low-end tones in a large body
Scale Length
22.8'' (579.1mm) vs 25.3'' (642.6mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
15.748'' (400mm) vs 15.75'' (400.1mm)
Easier to play chords without muting strings
Value Score
86 vs 80
Better price/quality relationship

Reasons to Get
Cort SFX-Myrtlewood over Earth Mini E Adirondack

Country of Manufacturing
Indonesia vs China
Built with higher quality standards
Neck Profile
Acoustic Modern V Shape vs Acoustic Cort
Great if you like to hang your thumb over the fretboard
Pickups Brand
Fishman vs None
Pickups from a renown brand
Number of Frets
20 vs 19
Allows to reach higher notes
Body Shape
Concert vs Dreadnought
Compact body with balanced tones
Scale Length
25.3'' (642.6mm) vs 22.8'' (579.1mm)
Lower action and brighter natural tone
Fretboard Radius
15.75'' (400.1mm) vs 15.748'' (400mm)
Flatter fretboard makes it easier to play single notes and bend

Other Key Differences
Cort Earth Mini E Adirondack vs SFX-Myrtlewood

Back Material
Mahogany vs Laurel
Different Back Material
Sides Material
Mahogany vs Laurel
Different Sides Material
Saddle Material
Bone vs Plastic
Different Saddle Material
Body Wood
Spruce vs Laurel
Different Body Wood
Nut Material
Bone vs Plastic
Different Nut Material

Shared Features
Cort Earth Mini E Adirondack vs SFX-Myrtlewood

Bridge Material
Ovangkol
Same Bridge Material
Neck Wood
Mahogany
Same Neck Wood
Fretboard Wood
Ovangkol
Same Fretboard Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Nut Width
1.693'' (43mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • Expensive Wood

Common Weaknesses

  • Solid Side Wood
  • Solid Back Wood
  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Cort Earth Mini E Adirondack Prices

    SET PRICE ALERT

    Cort SFX-Myrtlewood Prices

      SET PRICE ALERT

      These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

      Hand Size Comfortability

      And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Cort SFX-Myrtlewood favors large hands more than the Cort Earth Mini E Adirondack.

      Cort Earth Mini E Adirondack:
      Big Hands
      Small Hands
      Cort SFX-Myrtlewood:
      Big Hands
      Small Hands

      Beginner Friendliness

      Both meet 4 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

      New Player Friendliness

      Cort Earth Mini E Adirondack
      • Easy-to-use bridge
      • Tall frets
      • Short scale
      • Comfortable neck
      • Comfortable shape
      • Comfortable fretboard
      • Narrow nut
      • Soft Strings
      • Locking tuners

      New Player Friendliness

      Cort SFX-Myrtlewood
      • Comfortable shape
      • Easy-to-use bridge
      • Tall frets
      • Comfortable neck
      • Comfortable fretboard
      • Narrow nut
      • Short scale
      • Soft Strings
      • Locking tuners

      Sound Quality Comparison

      The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

      Woods Used in Both

      Mahogany wood pattern used for guitar building
      Mahogany
      Ovangkol wood pattern used for guitar building
      Ovangkol

      Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

      Ovangkol is a beautiful wood that's popular for acoustic guitars. Its tone sits somewhere between rosewood and mahogany, meaning it has a punchy low-end and nice mid-range. Find out more about Ovangkol.

      Woods Used in the Cort Earth Mini E Adirondack

      Spruce wood pattern used for guitar building
      Spruce

      Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

      Woods Used in the Cort SFX-Myrtlewood

      Laurel wood pattern used for guitar building
      Laurel

      There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.

      Winner: Tie.

      Electronics

      Both come with electronics that allow you connect them to an amplifier or interface for recording.

      Winner:Tie.

      Final Sound Quality Scores

      Cort Earth Mini E Adirondack
      Sustain 85
      Versatility 75
      Tuning Stability 70
      Sound 83
      Cort SFX-Myrtlewood
      Sustain 75
      Versatility 85
      Tuning Stability 65
      Sound 81

      Build Quality Comparison

      When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Cort Earth Mini E Adirondack compares to the Cort SFX-Myrtlewood.

      Country of Origin

      The manufacturing country can tell a lot about the build quality of an instrument. The Cort Earth Mini E Adirondack is built in China while the Cort SFX-Myrtlewood is made in Indonesia.

      China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

      Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

      Winner: Cort SFX-Myrtlewood

      Nut Material

      If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

      The Cort Earth Mini E Adirondack has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

      On the other hand, the Cort SFX-Myrtlewood comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

      Winner: Cort Earth Mini E Adirondack.

      Fret Material

      Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

      Unfortunately, none of them come with stainless steel frets.

      Winner: Tie.

      Tuners

      Both come with regular tuners. Both come with Die-Cast w/ Black Knobs.

      Winner: Tie.

      Here is the list of features that were considered when choosing the winner in the Features subcategory:

      Strengths & Weaknesses
      Cort Earth Mini E Adirondack
      • Expensive Wood
      • Bone Nut
      • Electronics
      • Bone Saddle
      • Solid Top Wood
      • Cheap Fret Wire (NS)
      • No Locking Tuners
      • Made in China
      • No Top Brand Pickups
      • Laminated Side Wood
      • Laminated Back Wood
      • No Compound Radius Fretboard
      • No 21:1 Tuner Ratio
      • No Strap Lock
      Strengths & Weaknesses
      Cort SFX-Myrtlewood
      • Expensive Wood
      • Top Brand Pickups
      • Electronics
      • Solid Top Wood
      • Cheap Fret Wire (NS)
      • No Locking Tuners
      • Made in Indonesia
      • No High-Quality Nut
      • Low-Quality Material Saddle
      • Laminated Side Wood
      • Laminated Back Wood
      • No Compound Radius Fretboard
      • No 21:1 Tuner Ratio
      • No Strap Lock

      Final Build Quality Scores

      Cort Earth Mini E Adirondack
      Quality of materials 71
      Features 75
      Quality Control 55
      Build Quality 67
      Cort SFX-Myrtlewood
      Quality of materials 61
      Features 85
      Quality Control 70
      Build Quality 72

      Playability Comparison

      Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

      Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

      Nut Width

      Cort Earth Mini E Adirondack Nut Width
      Both Guitars Have The Same Nut Width

      The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').

      This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

      Scale Length

      Cort Earth Mini E Adirondack's Scale Length
      Cort Earth Mini E Adirondack's Scale Length
      Cort SFX-Myrtlewood's Scale Length
      Cort SFX-Myrtlewood's Scale Length

      The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

      The Cort SFX-Myrtlewood has the longest scale: 25.3". The Cort Earth Mini E Adirondack is only 22.8" long. This is a 2.5'' (63.5mm) scale length difference.

      This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

      This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

      Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

      Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

      Neck Profile

      Cort Earth Mini E Adirondack Neck Profile
      Cort Earth Mini E Adirondack's neck profile
      Cort SFX-Myrtlewood Neck Profile
      Cort SFX-Myrtlewood's neck profile

      No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

      In this case, both have different neck shapes:

      The Cort Earth Mini E Adirondack has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

      The Cort SFX-Myrtlewood, on the other hand, has a V neck. This neck shape was more common during Fender's early years. Some people like it because they use their thumb over the edge of the fretboard to press the lower strings. It's rather thicker than most modern necks, so it's not usually used for playing fast solos.

      Fretboard Radius

      Cort Earth Mini E Adirondack Fingerboard Radius
      Cort Earth Mini E Adirondack's Fingerboard radius
      Cort SFX-Myrtlewood Fingerboard Radius
      Cort SFX-Myrtlewood's Fingerboard radius

      Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

      In this case, the Cort Earth Mini E Adirondack's fingerboard radius is smaller, which means it's more curved than the Cort SFX-Myrtlewood's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Cort SFX-Myrtlewood.

      Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

      Fret Size

      Cort Earth Mini E Adirondack and Cort SFX-Myrtlewood Frets Size
      Both have a similar Medium fret size

      Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

      Final Playability Scores

      Cort Earth Mini E Adirondack
      Bending & Vibrato Ease 90
      Chord Playability 75
      Solo Playability 70
      Playability 78
      Cort SFX-Myrtlewood
      Bending & Vibrato Ease 75
      Chord Playability 75
      Solo Playability 70
      Playability 73