Swap
Swap
Cort Earth Bevel Cut
Epiphone Songmaker Deluxe FT-100 CE
VS
Playability
73
Sound
83
Build
67
Value
89
Score
74
FIND IT ON:
Sweetwater logoMusician's Friend logo
Playability
73
Sound
78
Build
65
Value
82
Score
72
FIND IT ON:
Amazon logoSweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Cort Earth Bevel Cut vs Epiphone Songmaker Deluxe FT-100 CE Specs Comparison
Cort Earth Bevel Cut Epiphone Songmaker Deluxe FT-100 CE
General
Brand: Cort Epiphone
Year: 2021 2017
Strings: 6 6
Made in: Indonesia China
Series: Earth Exclusives
Colors: Natural Sunburst
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Sitka Spruce Layered Spruce
Sides Material: Mahogany Mahogany
Back Material: Mahogany Mahogany
Bridge: Ovangkol Belly Down; Indian Laurel
Neck
Neck Joint: Set Set
Tuners: Die-Casting Stamped, Covered
Fretboard: Ovangkol Indian Laurel
Neck Material: Mahogany Mahogany
Decoration: Dot Dot
Scale Size: 25.3" 25.5"
Shape: Acoustic Cort Acoustic SlimTaper C
Frets: 20 Medium Nickel Silver 20 Medium Jumbo Nickel Silver
Fretboard Radius: 15.748" 12"
Nut: Bone Plastic
Nut Width: 43mm (1.693'') 43mm (1.693'')
Electronics
Pickups: Passive Piezo Under Saddle (Preamp / Passive)
Hardware
Strap Lock: No No
Hardware Color: Chrome Nickel

Reasons to Get
Cort Earth Bevel Cut over Epiphone Songmaker Deluxe FT-100 CE

Country of Manufacturing
Indonesia vs China
Built with higher quality standards
Release Year
2021 vs 2017
From a more recent year
Nut Material
Bone vs Plastic
Good quality nut with rich tone
Top Wood
Solid vs Laminated
Helps with richer tones and louder volume
Scale Length
25.3'' (642.6mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
15.748'' (400mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
89 vs 82
Better price/quality relationship

Reasons to Get
Epiphone Songmaker Deluxe FT-100 CE over Cort Earth Bevel Cut

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Pickups Brand
Piezo vs None
Pickups from a renown brand
Scale Length
25.5'' (647.7mm) vs 25.3'' (642.6mm)
Lower action and brighter natural tone
Fretboard Radius
12'' (304.8mm) vs 15.748'' (400mm)
Easier to play chords without muting strings

Other Key Differences
Cort Earth Bevel Cut vs Epiphone Songmaker Deluxe FT-100 CE

Saddle Material
Bone vs NuBone
Different Saddle Material
Bridge Material
Ovangkol vs Belly Down; Indian Laurel
Different Bridge Material
Fretboard Wood
Ovangkol vs Laurel
Different Fretboard Wood
Nut Material
Bone vs Plastic
Different Nut Material

Shared Features
Cort Earth Bevel Cut vs Epiphone Songmaker Deluxe FT-100 CE

Back Material
Mahogany
Same Back Material
Sides Material
Mahogany
Same Sides Material
Body Wood
Spruce
Same Body Wood
Neck Wood
Mahogany
Same Neck Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Nut Width
1.693'' (43mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium vs Medium Jumbo
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Expensive Wood

Common Weaknesses

  • Solid Side Wood
  • Solid Back Wood
  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Cort Earth Bevel Cut Prices

    SET PRICE ALERT

    Epiphone Songmaker Deluxe FT-100 CE Prices

    SET PRICE ALERT

    These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

    Hand Size Comfortability

    After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .

    Cort Earth Bevel Cut:
    Big Hands
    Small Hands
    Epiphone Songmaker Deluxe FT-100 CE:
    Big Hands
    Small Hands

    Beginner Friendliness

    Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

    New Player Friendliness

    Cort Earth Bevel Cut
    • Easy-to-use bridge
    • Tall frets
    • Comfortable neck
    • Comfortable shape
    • Comfortable fretboard
    • Narrow nut
    • Short scale
    • Soft Strings
    • Locking tuners

    New Player Friendliness

    Epiphone Songmaker Deluxe FT-100 CE
    • Easy-to-use bridge
    • Tall frets
    • Comfortable neck
    • Comfortable shape
    • Comfortable fretboard
    • Narrow nut
    • Short scale
    • Soft Strings
    • Locking tuners

    Sound Quality Comparison

    The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

    Woods Used in Both

    Mahogany wood pattern used for guitar building
    Mahogany
    Spruce wood pattern used for guitar building
    Spruce

    Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

    Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

    Woods Used in the Cort Earth Bevel Cut

    Ovangkol wood pattern used for guitar building
    Ovangkol

    Ovangkol is a beautiful wood that's popular for acoustic guitars. Its tone sits somewhere between rosewood and mahogany, meaning it has a punchy low-end and nice mid-range. Find out more about Ovangkol.

    Woods Used in the Epiphone Songmaker Deluxe FT-100 CE

    Laurel wood pattern used for guitar building
    Laurel

    There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.

    Winner: Tie.

    Electronics

    The Epiphone Songmaker Deluxe FT-100 CE comes with a preamp that allows you to connect it to an amp, unlike its competitor. This allows it to have more versatility and sound quality if you want to record with it or play live.

    Winner:Epiphone Songmaker Deluxe FT-100 CE.

    Final Sound Quality Scores

    Cort Earth Bevel Cut
    Sustain 80
    Versatility 80
    Tuning Stability 70
    Sound 83
    Epiphone Songmaker Deluxe FT-100 CE
    Sustain 65
    Versatility 80
    Tuning Stability 65
    Sound 78

    Build Quality Comparison

    When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Cort Earth Bevel Cut compares to the Epiphone Songmaker Deluxe FT-100 CE.

    Country of Origin

    The manufacturing country can tell a lot about the build quality of an instrument. The Cort Earth Bevel Cut is built in Indonesia while the Epiphone Songmaker Deluxe FT-100 CE is made in China.

    Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

    China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

    Winner: Cort Earth Bevel Cut

    Nut Material

    If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

    The Cort Earth Bevel Cut has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

    On the other hand, the Epiphone Songmaker Deluxe FT-100 CE comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

    Winner: Cort Earth Bevel Cut.

    Fret Material

    Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

    Unfortunately, none of them come with stainless steel frets.

    Winner: Tie.

    Tuners

    Both come with regular tuners. The Cort Earth Bevel Cut's are Die-Casting while the Epiphone Songmaker Deluxe FT-100 CE's are Stamped, Covered

    Winner: Tie.

    Here is the list of features that were considered when choosing the winner in the Features subcategory:

    Strengths & Weaknesses
    Cort Earth Bevel Cut
    • Expensive Wood
    • Bone Nut
    • Bone Saddle
    • Solid Top Wood
    • Cheap Fret Wire (NS)
    • No Locking Tuners
    • Made in Indonesia
    • No Top Brand Pickups
    • No Electronics
    • Laminated Side Wood
    • Laminated Back Wood
    • No Compound Radius Fretboard
    • No 21:1 Tuner Ratio
    • No Strap Lock
    Strengths & Weaknesses
    Epiphone Songmaker Deluxe FT-100 CE
    • Expensive Wood
    • Top Brand Pickups
    • Electronics
    • Cheap Fret Wire (NS)
    • No Locking Tuners
    • Made in China
    • No High-Quality Nut
    • Low-Quality Material Saddle
    • Laminated Top Wood
    • Laminated Side Wood
    • Laminated Back Wood
    • No Compound Radius Fretboard
    • No 21:1 Tuner Ratio
    • No Strap Lock

    Final Build Quality Scores

    Cort Earth Bevel Cut
    Quality of materials 71
    Features 65
    Quality Control 65
    Build Quality 67
    Epiphone Songmaker Deluxe FT-100 CE
    Quality of materials 56
    Features 85
    Quality Control 55
    Build Quality 65

    Playability Comparison

    Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

    Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

    Nut Width

    Cort Earth Bevel Cut Nut Width
    Both Guitars Have The Same Nut Width

    The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').

    This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

    Scale Length

    Cort Earth Bevel Cut's Scale Length
    Cort Earth Bevel Cut's Scale Length
    Epiphone Songmaker Deluxe FT-100 CE's Scale Length
    Epiphone Songmaker Deluxe FT-100 CE's Scale Length

    The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

    The Epiphone Songmaker Deluxe FT-100 CE has the longest scale: 25.5". The Cort Earth Bevel Cut is only 25.3" long. This is a 0.2'' (5.1mm) scale length difference.

    This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

    This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

    Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

    Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

    Neck Profile

    Cort Earth Bevel Cut Neck Profile
    Cort Earth Bevel Cut's neck profile
    Epiphone Songmaker Deluxe FT-100 CE Neck Profile
    Epiphone Songmaker Deluxe FT-100 CE's neck profile

    No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

    Both the Cort Earth Bevel Cut and the Epiphone Songmaker Deluxe FT-100 CE have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

    Fretboard Radius

    Cort Earth Bevel Cut Fingerboard Radius
    Cort Earth Bevel Cut's Fingerboard radius
    Epiphone Songmaker Deluxe FT-100 CE Fingerboard Radius
    Epiphone Songmaker Deluxe FT-100 CE's Fingerboard radius

    Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

    In this case, the Epiphone Songmaker Deluxe FT-100 CE's fingerboard radius is smaller, which means it's more curved than the Cort Earth Bevel Cut's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Cort Earth Bevel Cut.

    Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

    Fret Size

    Cort Earth Bevel Cut Frets Size
    Cort Earth Bevel Cut's Frets Size
    Epiphone Songmaker Deluxe FT-100 CE Frets Size
    Epiphone Songmaker Deluxe FT-100 CE's Frets Size

    The Epiphone Songmaker Deluxe FT-100 CE has Medium Jumbo frets, which should be taller than the Cort Earth Bevel Cut's Medium frets.

    Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

    Final Playability Scores

    Cort Earth Bevel Cut
    Bending & Vibrato Ease 75
    Chord Playability 65
    Solo Playability 80
    Playability 73
    Epiphone Songmaker Deluxe FT-100 CE
    Bending & Vibrato Ease 75
    Chord Playability 65
    Solo Playability 80
    Playability 73